Image
Product
Price
- 2 in. Block And Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black
- U-Bolt Kit; 2 in. Block And U-Bolt Kit; Thread Size 5/8 inch; Inside Width 3.625 in.; Inside Length 15.5 in.; Round; E-Coated Black;
- U-Bolt Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fabricated Steel Blocks Are Stronger And Offer A Longer Lifespan
- Tapered To Reduce Drive Shaft Angle
- Single 9/16 in. Pin Blocks
- 2.5 in. Wide
- Powder Coated Black
- U-Bolts Are E-Coated Black
- Corrosion Resistant
- Has the rear of your vehicle started to sag, or are you looking to add a bit of lift height? Whatever the case maybe we have you covered at Rough Country. Upgrade your rear suspension with Rough Countrys vehicle-specific block and U-bolt kit! Rough Countrys rear block and U-bolt kits provide a simple remedy to an age-old problem that simply happens over the span of your vehicle lift. Each kit offers two fabricated steel blocks that are tapered to reduce driveline angles and are much stronger than the standard cast block option. These heavy-duty replacements feature a single pin measuring in a 9/16- in. to snuggle fit into your factory axle pad. Also included is a set of e-coated corrosion-resistant steel U-bolts. Our U-bolts offer four inches of thread ensuring that you have plenty of length to securely install this kit to the rear of your vehicle in no time flat. Best of all, Rough Countrys vehicle-specific kits are backed by Rough Countrys Satisfaction Guarantee!
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Chevrolet Silverado 1500 | LT |
- 3 in.; Nitrogen Charged N3 Shock Absorbers; 2 in. Rear Blocks; Front Upper Strut Extensions; U-Bolts
- Suspension Lift Kit; 3 in.; Nitrogen Charged N3 Shock Absorbers; 2 in. Rear Blocks; Front Upper Strut Extensions; U-Bolts;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 3 In.
-
Features:
- Easy Installation
- Increased Ground Clearance
- Levels The Front With The Rear Of The Vehicle
- Lifted Front Struts Help Maintain Smooth Factory-Like Ride
- Front Struts Are Structurally engineered For Lifted Applications
- Levels The Front By 3 in. Eliminating The Need For Strut Spacers
- Front Struts Feature A 3-year Limited Warranty
- The power of N3 also arrives for Toyota Tacoma at an incredible value. Take your truck to new heights with this excellent option for 05-21 Toyota Tacoma.Rough Countrys 3- in. Bolt-On Kit features N3 Nitrogen-charged shocks, giving your truck incredible ride-quality both on and off-road. Also included are a set of durable strut spacers and 2 in. fabricated rear blocks to provide lift height from front to rear. Once installed, this kit gives your truck plenty of ride height for larger tires while offering a clean, level look from front to rear.This all-inclusive kit comes with everything you need, and installation is a piece of cake compared to other kits on the market! Featuring an easy installation process that requires minor cutting and drilling, this kit can be installed using common tools in a home garage, and allows the truck to be returned to stock at any time if so desired. Best of all this kit features Rough Countrys Lifetime Replacement Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | TRD Sport Prerunner | 241 |
- 2.5 in. Lift Includes The Following Parts~Necessary Installation Hardware~Strut Spacers
- Leveling Lift Kit; 2.5 in. Lift;
- Leveling Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Increased Ground Clearance
- Levels Front Of Vehicle w/The Rear
- Leveling Lift Kit; 2.5 in. Lift;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Expedition | V | - | 8 Cyl 5.4L | 330 |
- w/Compressor; Wireless Controller; 0-6 in. Lift Kit
- Air Spring Kit; w/Compressor; Wireless Controller; 0-6 in. Lift Kit;
- Air Spring Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Easy To Install
- Durable Powder Coated Steel Brackets
- Push To Connect Air Fittings
- Internal Bump Stop In Air Bag
- Double Convoluted Air Bag
- Complete Kit
- Levels Truck When Towing For Safer Load Carrying
- Includes DOT Approved Air Line
- Front And Rear Headlight Adjustment Brackets Included For 2021 Models With Headlight Actuators
- Ideal Leveling. Is your truck your workhorse? The main attraction to the pick-up line is the accessibility to haul and tow as desired. However, due to the amount of weight in the bed, or the condition of the vehicles rear leaf springs, this can cause the vehicle to be un-level when under load. Here at Rough Country, we created an innovative new product to ensure that these are troubles of the past. Introducing, Rough Countrys Rear Air Spring Kit.Heavy-duty Construction. Rough Countrys Rear Air Spring Kit features two RC branded high-quality double convoluted airbags complemented with DOT-approved airlines. Whether you plan on towing or hauling in the not-so-distant future Rough Countrys Air Spring kit is the must-have accessory to ensure that your trailer is level reducing the weight off of the tongue of your trailer. Each kit offers 1/4 in. push connector fittings and all of the bracketry needed to ensure installation is lightning fast and secure! Rough Countrys Air Spring kit provides up to 5,000 lbs of load support to ensure that you experience less sway and bottoming out when braking and steering! Installation. With an estimated timeframe of 1-2 hours this full kit can be installed at home using standard tools and can be completed efficiently and quickly! Limited Lifetime Replacement Warranty. Rough Countrys Rear Air Spring Kit is backed with a limited-lifetime replacement warranty towards manufacturer defects. As such, the product is protected from structural and workmanship damage after the date of purchase. With our industry-leading warranty give yourself peace of mind when using Rough Countrys Suspension products!
Additional Fitment Information:
| Vehicle |
|---|
| 2006 - Chevrolet Silverado 2500 HD |
- 2.5 in. Lift Install Time 2-3 Hours~Includes The Following Parts~Necessary Installation Hardware~Strut Spacers
- Leveling Lift Kit; 2.5 in. Lift;
- Leveling Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- 10-Stage Variable Valving
- Increased Ground Clearance
- Levels Front Of Vehicle w/The Rear
- Leveling Lift Kit; 2.5 in. Lift;
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Ford Expedition | V | - | 8 Cyl 5.4L | 330 |
- 3-5 in.; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 26.5 in.; Collapsed Length 15.63 in.;Rear w/4 - 5.5 in. Lift
- N3 Shocks; Rear; 3-5 in.; 35 mm. Piston; 54 mm. Shock Body; 36 Kilonewton Tensile Strength; Extended Length 26.5 in.; Collapsed Length 15.63 in.;
- N3 Shocks
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer; And Birth Defects Or Other Reproductive Harm. For More Information: Www.roughcountry.com/prop65 And Www.p65warnings.ca.gov
-
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
- 35mm Piston
- Chromed Hardened 18mm Piston Rod
- 54mm Shock Body To Dissipate Heat Faster
- 36kN Tensile Strength
- Spring Loaded Piston Rod Seal
- Military Spec. Fluid Rated To 40 Deg. C
- Rubber Bushings For Better Absorption
- Metallic Silver Paint
- Free Shipping
- 3-Year Manufacturers Warranty
- Improve your on and off-road ride quality with Rough Countrys premium N3 shocks! These 10-stage variable valving, high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body, this shock offers up to 36kN Tensile Strength for a long lifespan of impressive vibration dampening. Features natural rubber bushings and an eye-catching metallic silver paint.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Toyota 4Runner | Rear |
- Monotube; 0-1.5 in. Lift; 22.9 in. Extended Length; 13.97 Collapsed Length;Rear w/0 - 1.5 in. Lift
- M1 Shock Absorber; Monotube; Rear; 0-1.5 in. Lift; 22.9 in. Extended Length; 13.97 Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 13.970 In.
- WARNING CA Proposition 65: No
- Extended Length: 22.900 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Toyota Tundra | Rear |
- Monotube; 2-5 in. Lift; 26.06 in. Extended Length; 15.63 Collapsed Length;Rear w/2 - 5 in. Lift
- M1 Shock Absorber
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Toyota Tundra | Rear |
- 0-6 in.; Monotube; 30 in. Extended Length; 18.4 Collapsed Length;Rear w/0 - 6 in. Lift
- M1 Shock Absorber; Rear; 0-6 in.; Monotube; 30 in. Extended Length; 18.4 Collapsed Length;
- M1 Shock Absorber
- Product Attributes:
- Collapsed Length: 18.400 In.
- Shock Stroke: 11.600 In.
- WARNING CA Proposition 65: No
- Extended Length: 30.000 In.
-
Features:
- 2 in. Seamless Extruded Tube
- 46mm Digressive Piston
- Self-Adjusting Deflective-Disc Independent Rebound And Compression
- 18mm Centerless-Ground/Case-Hardened/Chromed And Super-Polished Rod
- 46mm Monotube Design Ensures Consistent And Fade-Free Performance In All Conditions
- Digressive Valving Instantly Reacts To Changing Surface Conditions
- Zinc Plated For Resistance Against Harsh Elements
- Available In Various Lift Heights For Multiple Applications
- Durable Vulcanized Natural Rubber Bushings
- Free Shipping
- 3 Year Manufacturer Warranty
- Whether youre tackling tough terrain or smooth city streets, Rough Countrys Nitrogen-charged M1 Monotube Shock Absorber leads the way, delivering impeccable ride quality and performance mile after mile. Rough Countrys Monotube M1 Shocks feature an internal floating piston design that keeps the shock oil and high-pressure nitrogen separate. The result is a lightning-fast reaction with no cavitation - just unbridled vibration damping at each and every obstacle. The M1 Monotube Shock Absorber is more than an upgrade - its a true performance shock. Each shock features a steel body that is brushed and galvanized boasting a passivation sealing technology that is sure to withstand the elements. The internal 46mm digressive piston offers countless years of durability. The M1 is designed to be mounted body-up for a more interesting look on the vehicle.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Ford F-150 | Rear | Lariat |
- 1 Pc; Gloss Black; 22x10; 8x180; -19 mm
- Series 86 Wheel; 1 Pc; Gloss Black; 22x10; 8x180; -19 mm;
- Series 86 Wheel
- Product Attributes:
- WARNING CA Proposition 65: No
- Wheel Width: 22
- Size: 22x10
- Wheel Diameter: 10
- Offset: Negative 19mm
- Backspace: 4.75
- Bolt Pattern: 8x170
-
Features:
- Gloss Black w/Milled Accents Finish
- 8-Spoke Design
- Single-Piece Aluminum Construction Delivers A Super Strong And Super Light Wheel
- Includes A Rough Country Black Center Cap
- Backed By A One Year Finish And Limited Lifetime Structural Warranty
- Set yourself apart from the pack with Rough Countrys One-Piece Series 86 Wheels. This 8-spoke black and machined wheel offers an incredible look thats sure to turn heads. This one-of-a-kind wheel features 8 spokes that flare out near the lip for a dramatic visual style thats perfect for any lifted vehicle. This stylish wheel features a gloss black coat with machined accents that pop under any truck or Jeep. Rough Countrys Series 86 is a one-piece wheel design, constructed from a single piece of heavy-duty aluminum for the optimal balance of weight and performance. Each Series 86 Wheel includes a black center cap with RC logo design and includes a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Ford F-150 | XL |
Showing 1 - 10 of 1186 products
Loading...