Image
Product
Price
- DODGE ADJ DRAG LINK 72-93
- Lift Height 0-8 in.; Adjustable
- DODGE ADJ DRAG LINK 72-93
- Drag Link
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Fits The Factory Tie Rod End
- Allows For Maximum Articulation
- Strongest Tie Rod Tube Available
- Includes Rubber Tie Rod Boots/Zerk Fittings
- Limited Lifetime Warranty
- Skyjacker offers a variety of adjustable drag links for many applications. These links provide proper steering component geometry for your lifted vehicles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Dodge W300 | Front |
- 4IN. REAR SPRING; 72-93 DODGE
- Lift Height 4-6 in.; Single Factory Block Can Be Removed To Reduce Lift 3.5 in.
- 4in.REAR SPRING;72-93 DODGE
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height:
- 4 In.
- 4.5 In.
- 5 In.
- 5.5 In.
- 6 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Lift/Drop Height:
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Dodge Ramcharger | V | 5211 | Rear | 8 Cyl 5.2L | 4WD | 318 |
- 6IN. REAR SPRING; 72-93 DODGE
- Lift Height 6-8 in.; Single Factory Block Can Be Removed To Reduce Lift 3.5 in.
- 6in.REAR SPRING;72-93 DODGE
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height:
- 6 In.
- 7 In.
- 8 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Lift/Drop Height:
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Dodge Ramcharger | V | 7211 | Rear | 8 Cyl 7.2L | 4WD | 440 |
- SOFTRIDE SPRG 4IN. FRT DODGE
- Lift Height 3-4 in.; Single
- SOFTRIDE SPRG 4in. FRT DODGE
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height:
- 3 In.
- 3.5 In.
- 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Lift/Drop Height:
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Plymouth Trailduster | V | - | Front | 8 Cyl 6.6L | 4WD | 400 |
- SYS BOX; 2-4IN. 74.5-93 DGE PK
- 2.5-4 in. Lift; Includes Front/Rear U Bolt Kits; Front Bushing Kit
- SYS BOX;2-4in. 74.5-93 DGE PK
- Component Box For PN[D200BKS/D400BKS]
- Product Attributes:
- Lift/Drop Height:
- 2 In.
- 3 In.
- 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
- Lift/Drop Height:
-
Features:
- Other Parts Required For A Complete Kit
- Limited Lifetime Warranty
- Suspension Lift Component Box contains of premium quality parts needed to complement the lift provided by your Skyjacker Suspension Lift kits.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Dodge W200 | V | - | 8 Cyl 5.9L | 360 |
- SOFTRIDE SPRG 4IN. REAR GM 1T
- Lift Height 4 in.; w/56 in. Spring; Single
- SOFTRIDE SPRG 4in. REAR GM 1T
- Softride Leaf Spring
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Constructed As Progressive Multileaf Packs
- Load Capacity Will Be Equal or Greater Than OE
- Made With American Steel
- Limited Lifetime Warranty
- Softride(R) springs use only American steel and the individual leafs of each spring are shot-peened with hard steel pellets at very high velocities. This shot-peening compresses the surface of the steel thereby increasing the tensile strength of the spring. Without this shot-peening procedure, the maximum wheel travel and ride quality could not be achieved without sacrificing the life of the spring. Softride(R) springs use bolt style spring clips, eliminating friction. Other spring designs use the c in. style bend clips which bend tightly over the spring leafs causing binding and friction. Skyjacker(R) Softride(R) springs taper over the entire length of the leaf creating more flex at the leaf ends. This tapering distributes loads more evenly over a greater area and reduces the tendency for one leaf to dig into the leaf above it.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - GMC K15 Suburban | Rear |
- NITRO SHOCK W/RED BOOT
- 29.83 in. Extended; 17.32 in. Collapsed; w/0 - 3.5 in. Lift
- NITRO SHOCK W/RED BOOT
- Nitro Shock Absorber
- Product Attributes:
- Collapsed Length: 17.320 In.
- Shock Stroke: 12.510 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 29.830 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Plymouth Trailduster | V | - | Rear | 8 Cyl 6.6L | 4WD | 400 |
- NITRO SHOCK W/RED BOOT
- 30.46 in. Extended; 17.42 in. Collapsed; w/5 - 8 in. Lift
- NITRO SHOCK W/RED BOOT
- Nitro Shock Absorber
- Product Attributes:
- Collapsed Length: 17.420 In.
- Shock Stroke: 13.040 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 30.460 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Ford F-150 | V | - | Rear | 8 Cyl 7.5L | 460 |
- NITRO SHOCK W/RED BOOT
- 30.46 in. Extended; 17.42 in. Collapsed;Dual OE w/7 - 9 in. Lift Ahead Of Axle
- NITRO SHOCK W/RED BOOT
- Nitro Shock Absorber
- Product Attributes:
- Collapsed Length: 17.420 In.
- Shock Stroke: 13.040 In.
- WARNING CA Proposition 65: Yes
- Extended Length: 30.460 In.
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Multi-Stage Velocity Sensitive Valving
- Twin Tube Construction
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Red Polyurethane Bushings
- Includes Red Boot 15 Other Colors Available
- Limited Lifetime Warranty
- Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1978 - Ford Bronco | V | 5753 | Front | 8 Cyl 5.8L | Windsor | 351 |
- 4IN. 67-77 F250 HIGHBOY SYSTM
- 4 in. Lift; For Use w/High Boy; Includes Front/Rear Leaf Springs; Front/Rear U Bolt Kits; Spring Bushing Kit
- 4in. 67-77 F250 HIGHBOY SYSTM
- Suspension Lift Kit w/Shock
- Product Attributes:
- Lift/Drop Height: 4 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Other Parts Required For A Complete Set
- Limited Lifetime Warranty
- Skyjacker Suspensions suspension lift kits provide a smooth, comfortable ride, while responding to on or off-road conditions. They help you get the right height, clearance, and attitude on your truck and maintain that factory ride quality, while improving handling. They come with all of the necessary mounting hardware and detailed instructions, and are available for 2WD or 4WD vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1978 - Ford F-250 | V | - | 8 Cyl 6.6L | 4WD | 400 |
Showing 1 - 10 of 228 products
Loading...