Image
Product
Price
- 1 in. Rear Metal Coil Spring Spacers
- 1 in. Lift; Pair Fits Vehicles w/Rear Load Leveling Suspension
- 22 TUNDRA/1in. REAR MET SPCRS
- Coil Spring Spacer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Raises Tundra Rear By 1 in.
- Strong Tab-and-slot Interlocked Integrity 1-piece Spacers
- Retain Your Tundra Factory Tuned Rear Coil Springs
- Add Rear Lift Height/Compensate For Additional Accessories
- Engineered For Long Lasting Comfort/Ride Control And Stability
- Visible Upgrade With Effortless Smooth Ride And Long Life
- Modern Exacting CNC Laser Cuts/Bends And Machining
- EZ Bolt-On/No Cutting/Drilling Or Other Modifications Needed
- Aggressive Look/Reinforced Strength/Proven Durability
- Tundra's coil spring rear has a comfortable, but soft spring rate. Is your rear end sagging? Is it hanging low from the added weight of an off-road rear bumper, toolbox, bed rack or other overland accessories?. Skyjacker has a solution. Rear coil spring Metal Spacers fit into the OEM upper spring mount to gain a better stance and function perfectly with the Tundra's factory coil springs. The strong tab-and-slot interlocked design of the rear 1-piece coil spring spacers integrate smoothly and function perfectly with the Tundra's OEM Coil Springs. These spacers raise the rear by 1-inch. All steel metal construction (0.1875mm - 3/16 in.) with modern exact CNC laser cuts, CNC bends and breaks, CNC machining and expert welds. They are powder coated to provide an extremely durable protective barrier to prevent corrosion. Comes complete with quality grade mounting hardware.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2022 - Toyota Tundra | Rear | SR | 4WD |
- 2 in. Rear Metal Coil Spring Spacers
- 2 in. Lift; Pair Fits Vehicles w/Rear Load Leveling Suspension
- 22 TUNDRA/2in. REAR MET SPCRS
- Coil Spring Spacer
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Raises Tundra Rear By 2 in.
- Strong Tab-and-slot Interlocked Integrity 1-piece Spacers
- Retain Your Tundra Factory Tuned Rear Coil Springs
- Add Rear Lift Height/Compensate For Additional Accessories
- Engineered For Long Lasting Comfort/Ride Control And Stability
- Visible Upgrade With Effortless Smooth Ride And Long Life
- Modern Exacting CNC Laser Cuts/Bends And Machining
- EZ Bolt-On/No Cutting/Drilling Or Other Modifications Needed
- Aggressive Look/Reinforced Strength/Proven Durability
- Tundra's coil spring rear has a comfortable, but soft spring rate. Is your rear end sagging? Is it hanging low from the added weight of an off-road rear bumper, toolbox, bed rack or other overland accessories?. Skyjacker has a solution. Rear coil spring Metal Spacers fit into the OEM upper spring mount to gain a better stance and function perfectly with the Tundra's factory coil springs. The strong tab-and-slot interlocked design of the rear 1-piece coil spring spacers integrate smoothly and function perfectly with the Tundra's OEM Coil Springs. These spacers raise the rear by 1-inch. All steel metal construction (0.1875mm - 3/16 in.) with modern exact CNC laser cuts, CNC bends and breaks, CNC machining and expert welds. They are powder coated to provide an extremely durable protective barrier to prevent corrosion. Comes complete with quality grade mounting hardware.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2022 - Toyota Tundra | Rear | Limited | 4WD |
- 2.5 in. Front Leveling Kit With Front Metal Strut Spacers.
- 2.5 in.; Metal Strut Spacers And Hardware Fits Vehicles w/Rear Load Leveling Suspension
- 22 TUNDRA 2.5in.FRT SPACER KT
- Leveling Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Strong Tab-and-slot Interlocked Integrity 1-piece Spacers
- Built-in Camber Correction To Optimized Ball Joint Angles
- Engineered To Operate \ Maintain Proper Suspension Geometry
- Delivers A Quicker Response To Terrain And Improved Handling
- More Aggressive Off-Road Stance At An Affordable Price
- Visible Upgrade With Effortless Smooth Ride And Long Life
- EZ Bolt-on. No Cutting / Drilling Or Other Modifications Needed
- Struts Remain Assembled. No Strut Spring Compressor Needed
- Cost-effective Option / Aligns To Oem Specifications
- Engineered For Long Lasting Comfort / Ride Control And Stability
- The Toyota Tundra sits lower in the front than the rear. This factory rake, nose-down stance is very evident. Skyjacker's 2.5-inch Front Metal Spacer will raise the front of your Tundra to give a more level stance. Raising your front ride height will add suspension clearance to add those bigger, more aggressive 295/60R20 off-road tires. Those bigger tires will add ground clearance. Added ground clearance will prevent you from scrubbing on turns and from bottoming out on the bumps, rocks, off-road debris or even a steep driveway. Increase equipment capabilities and compensate for added weight of accessories like a winch, off-road bumper or combination of both. Retain your Tundra factory tuned performance struts by utilizing top mounted strut spacers to elevate the stance. (Front OEM strut stays assembled, so there is no need for a strut spring compressor.) Skyjacker's 1-piece top mount strut spacer has a strong tab-and-slot interlocked design specifically engineered with camber offsets. These top mount strut spacers integrate smoothly with OEM suspension geometry and function perfectly allowing the CV axles to operate within limits of OEM upper and lower control arms. All steel metal construction (0.1875mm - 3/16 in.) with modern exact CNC laser cuts, CNC bends and breaks, CNC machining and expert welds. They are powder coated to provide an extremely durable protective barrier to prevent corrosion. Comes complete with quality grade mounting hardware.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2022 - Toyota Tundra | Front | 1794 Edition | 4WD |
- 2.5 in. Lift Kit With Front and Rear Metal Spacers.
- 2.5 in. Lift; Includes 2.5 in. Front Metal Strut Spacers; 1 in. Rear Metal Coil Spring Spacers And Hardware Fits Vehicles w/Rear Load Leveling Suspension
- 22 TUNDRA 2.5in.F/1in.R SPCR KT
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Matching Set Of 2.5-inch Front Top Mount Strut Spacers
- Matching Set Of 1-inch Rear Top Mount Coil Spring Spacers
- Strong Tab-and-slot Interlocked Integrity 1-piece Spacers
- Built-in Camber Correction To Optimized Ball Joint Angles
- Engineered To Operate \ Maintain Proper Suspension Geometry
- Visible Upgrade With Effortless Smooth Ride And Long Life
- EZ Bolt-On / No Cutting / Drilling Or Other Modifications Needed
- Front Struts Remain Assembled / No Strut Spring Compressor Needed
- Enjoy Enhanced Attitude And Increased Suspension Clearance
- Conquer your exciting daily highway adventures and the trail's toughest terrains with a bold new attitude. The Toyota Tundra sits lower in the front than the rear. This factory rake, nose-down stance is very evident. The coil spring rear has a comfortable, but soft spring rate. This Skyjacker Metal Spacer Kit will raise the suspension clearance of your Tundra (2.5-Inch Front & 1.0-Inch Rear). Raising the suspension clearance of your Tundra gives you the freedom to add larger, more aggressive 295/60R20 tires for greater ground clearance. Added ground clearance will prevent you from scrubbing on turns and from bottoming out on the bumps, rocks, off-road debris or even a steep driveway. Retain your Tundra factory tuned performance front struts and rear coil springs by utilizing top mounted spacers to elevate the stance. Skyjacker's 1-piece top mount spacers have a strong tab-and-slot interlocked design. Engineered with camber offsets, front strut spacers integrate smoothly with OEM suspension geometry and function perfectly allowing the CV axles to operate within limits of OEM upper and lower control arms. (Front OEM strut stays assembled, so there is no need for a strut spring compressor.) Rear coil spring spacers fit into the OEM upper spring mount to gain a better level stance and function perfectly with the Tundra's factory coil springs. All steel metal construction (0.1875mm - 3/16 in.) with modern exact CNC laser cuts, CNC bends and breaks, CNC machining and expert welds. They are powder coated to provide an extremely durable protective barrier to prevent corrosion. Comes complete with quality grade mounting hardware. This Skyjacker Metal Spacer Kit is a great way to compensate for added front weight of accessories like a winch, off-road bumper or combination of both. Increase capabilities for added weight of an off-road rear bumper, toolbox, bed rack or other overland accessories.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2022 - Toyota Tundra | V | 3445 | 6 Cyl 3.4L | Limited | 4WD | - |
- Pair; 1-3 in.
- UPR A-ARMS 1-3in.;03-22 4RUNR
- Upper A-Arm
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: California Residents- Warning: Cancer And-or Other Reproductive Harm. (for More Information Go To Www.p65warnings.ca.gov)
-
Features:
- Upper A-Arm
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Toyota 4Runner | Front Upper |
Showing 1 - 5 of 5 products
Loading...