Image
Product
Price
- Axle Shaft Bearing Retainer
- with Dana 44 Axle
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1968 - Jeep CJ5 | Rear |
- Axle Shaft Bearing Retainer
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4203605, AUN8429, DS36797
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1968 - Jeep CJ5 | Rear |
- Differential Cover Bolt
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
- Product Attributes:
- Thread Size: .312-18
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 0.625
- Grade: 5
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
This Part Fits the Following OEM/Substitute Numbers:
DS34279, N155154
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1968 - Jeep CJ6 | Rear |
- Differential Cover Bolt
- with Dana 30 Axle
- FSGR
- Product Attributes:
- Thread Size: .312-18
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 0.625
- Grade: 5
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1968 - Jeep CJ6 | Rear |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension without CV Front Driveshaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1968 - Jeep Gladiator | Front Driveshaft at Front Axle | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension without CV Front Driveshaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1968 - Jeep Gladiator | Rear Driveshaft at Rear Axle | 4WD |
- Universal Joint
- with 3.219in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter Greaseable with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1968 - Jeep J-3500 | Front Driveshaft at Transfer Case | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Non-Greasable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.219
- Snap Ring (2): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.219
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Length A (In): 3.219
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1968 - Jeep Jeepster | Rear Driveshaft at Transmission | 4WD |
- Universal Joint
- with 3.219in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter Non-Greasable with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.219
- Snap Ring (2): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.219
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Length A (In): 3.219
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1968 - Jeep J-3600 | Rear Driveshaft at Transmission | 4WD |
- Universal Joint
- with 3.219in Outside Snap Ring Dimension 1 Piece Driveshaft 1.062in Bearing Cap Diameter Non-Greasable with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.219
- Snap Ring (2): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.219
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Length A (In): 3.219
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1968 - Jeep J-2700 | Rear Driveshaft at Rear Axle | 4WD |
Showing 1 - 10 of 120 products
Loading...