Image
Product
Price
- Axle Shaft Bearing Retainer
- with Dana 44 Axle
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep CJ6 | Rear |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
816753, DS706116X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep CJ6 | Front |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 30 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep Wagoneer | Front |
- Axle Shaft Bearing Retainer
- with Dana 44 Axle with Dana 44 Axle(s)
- FSGR
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4203605, AUN8429, DS36797
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep CJ5 | Rear |
- Differential Cover Bolt
- with Dana 30 Axle
- FSGR
- Product Attributes:
- Thread Size: .312-18
- Self Locking: Y
- Head Style: Hex
- Length Under Head (In): 0.625
- Grade: 5
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
This Part Fits the Following OEM/Substitute Numbers:
DS34279, N155154
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep CJ6 | Front |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1971 - Jeep J-3800 | Front Driveshaft at Transfer Case | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension with Outside Snap Rings
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1971 - Jeep Wagoneer | Front Driveshaft at Front Axle | 4WD |
- Universal Joint
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension with Outside Snap Rings
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.219
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.219
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1971 - Jeep Wagoneer | Front Driveshaft at Transfer Case | 4WD |
- Axle Spindle Bearing
- with Dana 30 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 41.20
- Cone Bore (MM): 33.32
- Cup Outside Diameter (IN): 1.62
- Bearing Type: Spindle Bearing And Seal Kit
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep Wagoneer | Front |
- Axle Spindle Bearing
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 41.20
- Cone Bore (MM): 33.32
- Cup Outside Diameter (IN): 1.62
- Bearing Type: Spindle Bearing And Seal Kit
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2JA749, 816757, DS706527X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Jeep CJ6 | Front |
Showing 1 - 10 of 86 products
Loading...