Image
Product
Price
- 4WD Actuator Housing Cover Gasket
- with Dana 44 Axle
- FSGR
- Product Attributes:
- Fitment: Disconnect Housing
- Axle Model: Dana 30
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
This Part Fits the Following OEM/Substitute Numbers:
DS41494
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Dodge Ram 1500 | Front |
- 4WD Actuator Housing Cover Gasket
- with Dana 60 Axle
- FSGR
- Product Attributes:
- Fitment: Disconnect Housing
- Axle Model: Dana 30
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Dodge Ram 3500 | Front |
- Ball Joint Kit - Upper/Lower (One Side)
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Location: Upper/lower
- Greasable: N
- Adjustable: N
- Ball Joint Kit: Y
- Axle Model: Dana 30/44
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Includes upper and one lower ball joint, one lower ball joint and hardware
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
816753, DS706116X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Dodge Ram 2500 | Front |
- Universal Joint Greaseable 1330 Series OSR
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1330
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04362-60200, 0436260200, 04371-04030, 04371-04090, 04371-0K070, 04371-0K080, 0437104030, 0437104090, 043710K070, 043710K080, 04375-0C020, 04375-0C030, 04375-0C040, 04375-0C041, 043750C020, 043750C030, 043750C040, 043750C041...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Dodge Ram 3500 | Front Driveshaft - CV at Transfer Case | 4WD |
- Universal Joint Greaseable 1330 Series OSR
- Greaseable with 1.062in Bearing Cup Diameter 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1330
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Dodge Ram 3500 | Rear Driveshaft at Rear Axle | 4WD |
- Universal Joint Greaseable 1330 Series OSR
- Greaseable with 2 Piece Rear Drive Shaft 1.062in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1330
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Dodge Ram 2500 | Front Driveshaft - CV at Transfer Case | 4WD |
- Universal Joint Greaseable 1330 Series OSR
- Greaseable with 1.062in Bearing Cup Diameter 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1330
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.062
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.062
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330
- Bearing Cap Diameter B (mm): 1.062
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Dodge Ram 3500 | Rear Driveshaft at Transmission | 4WD |
- Non-Greasable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft Inside Snap Ring Dimension of 3.000in with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Length B (In): 3
- Bearing Cap Diameter (1): 1.375
- Length A (In): 3
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
- Bearing Cap Type: Round
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Dodge Ram 3500 | Front Axle at Wheels | 4WD |
- with 2 Piece Drive Shaft with Dana Model 60 Axle Inside Snap Ring Dimension of 3.000in Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Greaseable: N
- Length B (In): 3
- Bearing Cap Diameter (1): 1.375
- Length A (In): 3
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
- Bearing Cap Type: Round
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Bearing Cap Diameter (2): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, CP332X, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Dodge Ram 2500 | Front Axle at Wheels | 4WD |
- Axle Spindle Bearing
- with Dana 44 Axle
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Cup Outside Diameter (MM): 41.20
- Cone Bore (MM): 33.32
- Cup Outside Diameter (IN): 1.62
- Bearing Type: Spindle Bearing And Seal Kit
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana.
- Tested and validated to rigorous OE specifications.
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
- Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2JA749, 816757, DS706527X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Dodge Ram 2500 | Front |
Showing 1 - 10 of 158 products
Loading...