2007 Spicer Parts


Showing 1 - 10 of 931 products
Image
SKU
Product
Rating
Price

Spicer
  • Axle Shaft Bearing Retainer
  • with Dana Super 44 Axle
  • FSGR
  • Features:
    • Genuine OE quality. Tested and proven.
    • Built to meet OE standards set by Dana.
    • Tested and validated to rigorous OE specifications.
    • Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
4203605, AUN8429, DS36797

Additional Fitment Information:
Vehicle Position
2007 - Nissan Armada Rear

Spicer
  • Axle Shaft Flange Gasket
  • with Dana 70 Axle
  • FSGR
  • Product Attributes:
    • Quantity: 1
    • Fitment: Outer Axle Flange
    • Axle Model: Dana 60, Dana 70, Dana 80
  • Features:
    • Genuine OE quality. Tested and proven.
    • Built to meet OE standards set by Dana.
    • Tested and validated to rigorous OE specifications.
    • Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace.
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
DS39697

Additional Fitment Information:
Vehicle Position
2007 - Ford E-350 Super Duty Rear

Spicer
  • Axle Spindle Thrust Washer Kit; All 3 washers are necessary for proper spacing
  • FSGR
  • Features:
    • Genuine OE quality. Tested and proven.
    • Built to meet OE standards set by Dana
    • Tested and validated to rigorous OE specifications
    • Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
  • Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
DS701166X

Additional Fitment Information:
Vehicle Position Drive Type
2007 - Ford F-350 Super Duty Front 4WD

Spicer
  • Ball Joint Kit- Dana S60 & Dana 60 Builder Axle Compatible; Upper/Lower-One Side
  • with 6K Monobeam Coil with Dana Super 60 Front Axle
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Location: Upper/lower
    • Greasable: N
    • Adjustable: N
    • Ball Joint Kit: Y
    • Axle Model: Dana 60
  • Features:
    • Includes upper and one lower ball joint, one lower ball joint and hardware
    • Genuine OE quality. Tested and proven.
    • Built to meet OE standards set by Dana
    • Tested and validated to rigorous OE specifications
  • Demand genuine Spicer. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

This Part Fits the Following OEM/Substitute Numbers:
DS708238

Additional Fitment Information:
Vehicle
2007 - Ford F-250 Super Duty

Spicer
  • Universal Joint Greaseable 1350 Series
  • Greaseable with 2 Piece Rear Drive Shaft 1.188in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1350 (spl30)
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.625
    • Bearing Cap Diameter (1): 1.188
    • Length A (In): 3.625
    • Grease Fitting Location: One Straight Lube Fitting In Cross
    • SR(1)Brng Cap to Brng Cap(OSR): 3.625
    • Bearing Cap Diameter A (mm): 1.188
    • Bearing Cap Type: Round
    • Length B (mm): 92.1
    • SR(2)Brng Cap to Brng Cap(OSR): 3.625
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.188
    • OEM Mfg: Spicer
    • OEM Series: 1350
    • Bearing Cap Diameter B (mm): 1.188
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 92.1
  • Features:
    • OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
    • Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
    • The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
    • Zerk allows for lubricating at regular intervals to help extend the life of the part.
  • When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2007 - GMC Sierra 1500 Rear Driveshaft at Support Bearing RWD

Spicer
  • Universal Joint Greaseable 1350 Series
  • Greaseable with 2 Piece Rear Drive Shaft 1.188in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1350 (spl30)
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.625
    • Bearing Cap Diameter (1): 1.188
    • Length A (In): 3.625
    • Grease Fitting Location: One Straight Lube Fitting In Cross
    • SR(1)Brng Cap to Brng Cap(OSR): 3.625
    • Bearing Cap Diameter A (mm): 1.188
    • Bearing Cap Type: Round
    • Length B (mm): 92.1
    • SR(2)Brng Cap to Brng Cap(OSR): 3.625
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.188
    • OEM Mfg: Spicer
    • OEM Series: 1350
    • Bearing Cap Diameter B (mm): 1.188
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 92.1
  • Features:
    • OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
    • Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
    • The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
    • Zerk allows for lubricating at regular intervals to help extend the life of the part.
  • When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
2007 - Ford F-150 Rear Driveshaft at Rear Axle

Spicer
  • Universal Joint Greaseable 1350 Series
  • Greaseable with 2 Piece Drive Shaft 1.188in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Cap to Cap Dimension 3.625in
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1350 (spl30)
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.625
    • Bearing Cap Diameter (1): 1.188
    • Length A (In): 3.625
    • Grease Fitting Location: One Straight Lube Fitting In Cross
    • SR(1)Brng Cap to Brng Cap(OSR): 3.625
    • Bearing Cap Diameter A (mm): 1.188
    • Bearing Cap Type: Round
    • Length B (mm): 92.1
    • SR(2)Brng Cap to Brng Cap(OSR): 3.625
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.188
    • OEM Mfg: Spicer
    • OEM Series: 1350
    • Bearing Cap Diameter B (mm): 1.188
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 92.1
  • Features:
    • OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
    • Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
    • The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
    • Zerk allows for lubricating at regular intervals to help extend the life of the part.
  • When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position Body Drive Type
2007 - Ford F-350 Super Duty Rear Driveshaft - CV at Transmission Extended Cab Pickup 4WD

Spicer
  • Universal Joint Greaseable 1350 Series
  • Greaseable with 2 Piece Drive Shaft 1.188in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Cap to Cap Dimension 3.625in
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1350 (spl30)
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.625
    • Bearing Cap Diameter (1): 1.188
    • Length A (In): 3.625
    • Grease Fitting Location: One Straight Lube Fitting In Cross
    • SR(1)Brng Cap to Brng Cap(OSR): 3.625
    • Bearing Cap Diameter A (mm): 1.188
    • Bearing Cap Type: Round
    • Length B (mm): 92.1
    • SR(2)Brng Cap to Brng Cap(OSR): 3.625
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.188
    • OEM Mfg: Spicer
    • OEM Series: 1350
    • Bearing Cap Diameter B (mm): 1.188
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 92.1
  • Features:
    • OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
    • Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
    • The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
    • Zerk allows for lubricating at regular intervals to help extend the life of the part.
  • When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position Body Drive Type
2007 - Ford F-350 Super Duty CV at Transmission Extended Cab Pickup 4WD

Spicer
  • Universal Joint Greaseable 1350 Series
  • Greaseable with 2 Piece Rear Drive Shaft 1.188in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
  • FSGR
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1350 (spl30)
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.625
    • Bearing Cap Diameter (1): 1.188
    • Length A (In): 3.625
    • Grease Fitting Location: One Straight Lube Fitting In Cross
    • SR(1)Brng Cap to Brng Cap(OSR): 3.625
    • Bearing Cap Diameter A (mm): 1.188
    • Bearing Cap Type: Round
    • Length B (mm): 92.1
    • SR(2)Brng Cap to Brng Cap(OSR): 3.625
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.188
    • OEM Mfg: Spicer
    • OEM Series: 1350
    • Bearing Cap Diameter B (mm): 1.188
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 92.1
  • Features:
    • OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
    • Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
    • The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
    • Zerk allows for lubricating at regular intervals to help extend the life of the part.
  • When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

Additional Fitment Information:
Vehicle Position
2007 - Ford F-150 Rear Driveshaft at Transmission

Spicer
  • Universal Joint Greaseable 1330 Series OSR
  • Greaseable with 2 Piece Rear Drive Shaft 1.062in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
  • FSGR
  • Product Attributes:
    • Bearing Cap Type B: Osr
    • Grease Type: N.l.g.i. Grade 2
    • Model Number: Spicer 1330
    • Bearing Cap Finish: Ground
    • Bearing Cap Type A: Osr
    • Greaseable: Y
    • Length B (In): 3.625
    • Bearing Cap Diameter (1): 1.062
    • Length A (In): 3.625
    • Grease Fitting Location: One Straight Lube Fitting In Cross
    • SR(1)Brng Cap to Brng Cap(OSR): 3.625
    • Bearing Cap Diameter A (mm): 1.062
    • Bearing Cap Type: Round
    • Length B (mm): 92.1
    • SR(2)Brng Cap to Brng Cap(OSR): 3.625
    • Pre Greased: N
    • Seal Material: Rubber
    • Grease Zerk Included: Y
    • Coating Type: None
    • Bearing Cap Diameter (2): 1.062
    • OEM Mfg: Spicer
    • OEM Series: 1330
    • Bearing Cap Diameter B (mm): 1.062
    • Seal Color/Finish: Blue
    • Snap Ring Included: Y
    • Snap Ring Type: External
    • Length A (mm): 92.1
  • Features:
    • OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
    • Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
    • The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
    • Zerk allows for lubricating at regular intervals to help extend the life of the part.
  • When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
  • Suggested Purchase Quantity: 4
    • Most jobs typically require 4 of this item.

This Part Fits the Following OEM/Substitute Numbers:
04362-60200, 0436260200, 04371-04030, 04371-04090, 04371-0K070, 04371-0K080, 0437104030, 0437104090, 043710K070, 043710K080, 04375-0C020, 04375-0C030, 04375-0C040, 04375-0C041, 043750C020, 043750C030, 043750C040, 043750C041...VIEW MORE

Additional Fitment Information:
Vehicle Position Drive Type
2007 - Toyota Sequoia Rear Driveshaft at Rear Axle RWD
Showing 1 - 10 of 931 products

Loading...