Image
Product
Price
- Drive Axle Shaft Universal Joint
- Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Snap Ring (1): 2.406
- Snap Ring (2): 2.406
- Length B (mm): 61.1
- SR(2)Brng Cap to Brng Cap(OSR): 2.406
- Bearing Cap Type A: Isr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350wj
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 61.1
- SR(1)Brng Cap to Brng Cap(OSR): 2.406
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2-0057, 489, 491
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Wrangler | Front Axle at Wheels |
- Non-Greasable with Uncoated
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Length B (mm): 61.1
- SR(2)Brng Cap to Brng Cap(OSR): 2.406
- Bearing Cap Type A: Isr
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350wj
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 61.1
- SR(1)Brng Cap to Brng Cap(OSR): 2.406
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Wrangler | Front Axle at Wheels |
- Universal Joint Greaseable S44/3R Series
- Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: 3r, Saginaw 44, Aam 1344
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Isr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.125
- Grease Fitting Location: Side Of Cross
- Type: Isr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 28.575
- Bearing Cap Type: Round With Isr Groove
- Length B (mm): 64.9
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.125
- OEM Mfg: Mechanics
- OEM Series: S44
- Bearing Cap Diameter B (mm): 28.575
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 64.9
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Chevrolet Suburban | Front Driveshaft at Transfer Case | 4WD |
- Universal Joint Greaseable S44/3R Series
- Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable
- FSGR
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: 3r, Saginaw 44, Aam 1344
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Isr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.125
- Grease Fitting Location: Side Of Cross
- Type: Isr Style
- Material: Steel
- Bearing Cap Diameter A (mm): 28.575
- Bearing Cap Type: Round With Isr Groove
- Length B (mm): 64.9
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.125
- OEM Mfg: Mechanics
- OEM Series: S44
- Bearing Cap Diameter B (mm): 28.575
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 64.9
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
This Part Fits the Following OEM/Substitute Numbers:
04030848, 12 47 9126, 12471502, 12479126, 15-3147X, 2-0795, 2-3010, 2-3011, 2-3011G, 2-3111, 2104-53147X, 23011, 23104840, 234, 235, 26042371, 2GN156, 2GN272...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Cadillac Escalade | Front Driveshaft at Front Axle | 4WD |
- Drive Axle Shaft Universal Joint
- Non-Greasable with Blue Coated
- HGVF
- Product Attributes:
- Snap Ring (1): 2.406
- Snap Ring (2): 2.406
- SR(2)Brng Cap to Brng Cap(OSR): 2.406
- Pre Greased: Y
- Greaseable: N
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Series: 1350wj
- OEM Mfg: Spicer
- Snap Ring Included: Y
- Snap Ring Type: Internal
- SR(1)Brng Cap to Brng Cap(OSR): 2.406
- Demand genuine Spicer. Made in the USA. Dana design, engineering, testing and manufacturing processes all work in conjunction with one another to ensure unparalleled performance that non-genuine parts simply cannot deliver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2-0057, 489, 491, 5-7166X
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Wrangler | Front Axle at Wheels |
- with Uncoated Greaseable Inside Snap Ring Dimension of 3.000in
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- SR(1)Brng Cap to Brng Cap(OSR): 3
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, 89029369, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Ford F-250 Super Duty | Front Axle at Wheels | 4WD |
- with Uncoated Inside Snap Ring Dimension of 3.000in Non-Greasable
- HGVF
- Product Attributes:
- Bearing Cap Type B: Isr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1480 Wj (spl55)
- Length B (mm): 76.2
- SR(2)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Isr
- Pre Greased: Y
- Seal Material: Rubber
- Grease Zerk Included: Not Required
- Coating Type: None
- Greaseable: N
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Spicer
- OEM Series: Spl55/1480wj
- Bearing Cap Diameter B (mm): 1.375
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 76.2
- SR(1)Brng Cap to Brng Cap(OSR): 3.000
- Bearing Cap Diameter A (mm): 1.375
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-807X, 3-0332, 374, 45U0301, CP332X, UJ374
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2020 - Ford F-250 Super Duty | Front Axle at Wheels | 4WD |
- Axle Shaft Seal
- With Electronic Locking Differential with Ultimate Dana 60 Front Axle with 3.112in Outside Diameter with ARB Air Locking Differential
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2510566C1, 88967017, DS50381, F81Z-1175-HA, F81Z-1175-HC
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Gladiator | Front |
- Axle Shaft Seal
- with Ultimate Dana 60 Front Axle 3.112in Outside Diameter with ARB Air Locking Differential With Electronic Locking Differential
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Wrangler | Front |
- Axle Shaft Seal
- With Electronic Locking Differential with Ultimate Dana 60 Front Axle 3.112in Outside Diameter with ARB Air Locking Differential
- FSGR
- Product Attributes:
- Axle Model: Dana 60
- Material: Rubber
-
Features:
- Genuine OE quality. Tested and proven.
- Built to meet OE standards set by Dana
- Tested and validated to rigorous OE specifications
- Latest production upgrades ensure genuine Spicer parts are as good or better than the OE parts they replace
- Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2020 - Jeep Gladiator | Front |
Showing 1 - 10 of 180 products
Loading...