1970 Ford Yukon Gear Parts
Choose a Model for your 1970 Ford
Image
Product
Price
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1970 - Ford F-250 | V | - | Front | 8 Cyl 5.9L | 360 |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Dana 44; Standard Rotation
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford F-250 | Rear |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Dana 44; Standard Rotation
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford F-250 | Center |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Dana 44; Standard Rotation
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford F-250 | Rear Driveshaft at Transmission |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Dana 44; Standard Rotation
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford F-250 | Rear Shaft Front Joint |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1970 - Ford F-250 | V | 6392 | Rear | 8 Cyl 6.4L | 390 |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Dana 44; Standard Rotation
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford F-250 | Front Left |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Dana 44; Standard Rotation
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1970 - Ford F-250 | Front Right |
- Dropout housing stud for Ford 8in./9
- 9 in. 10 Bolt; 8 in. Ford 9 in.
- Dropout housing stud for Ford 8in./9in.
- Dropout Housing Stud
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 8 in. And 9 in.
- Housing Stud
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1970 - Ford F-100 | Rear | RWD |
- Yukon standard open spider gear kit for Dana 30 with 27 spline axles
- Dana 30/Reverse; 27 Spline Dana 30; Spider Gear Set; 27 spline; Fits Standard Open Carrier~Dana 30; Standard Rotation; 27 Spline
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fit Dana Spicer 30 Open Differential w/27 Spline Axles
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
This Part Fits the Following OEM/Substitute Numbers:
ZIKD30-S-27
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Ford Bronco |
Showing 1 - 10 of 205 products
Loading...