Image
Product
Price
- Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline.
- Dana 44; 30 Splines Dana 44; Standard Rotation; 30 Splines~Dura Grip Posi Carrier Gear Kit
- Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 44 w/Dura Grip Positraction
- Spider Gear Kit
- Includes Two Side Gears
- Four Pinion Gears
- Cross Pin Shaft
- Roll Pin And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Chevrolet K10 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Chevrolet K5 Blazer | L | - | Front | 6 Cyl 4.1L | 4WD | 250 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Chevrolet K5 Blazer | V | - | Rear | 8 Cyl 5.0L | 4WD | 305 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.5 in.; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
26066706
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Chevrolet K5 Blazer | V | - | Front | 8 Cyl 6.6L | 4WD | 400 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.5 in.; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1978 - Chevrolet K5 Blazer | V | - | Rear | 8 Cyl 7.4L | 4WD | 454 |
- 8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
- 8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.5 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
- Yukon Dura Grip Differential
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Chevrolet Impala | L | - | Front | 6 Cyl 4.1L | 250 |
- 8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
- 8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.5 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
- Yukon Dura Grip Differential
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Chevrolet Camaro | L | - | Rear | 6 Cyl 4.1L | 250 |
- Yukon Chromoly Outer Front Axle for Dana 60/Dana 70; 35 Spline; 12in. Long
- Dana 60; 35 Spline; 12 in. Length Dana 60 Standard Rotation Front; Outer Stub Axle; 4340 Chromoly; 35 Spline; 12 in. Length~Dana 60; Standard Rotation; 35 Spline; 12 in. Length
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Stub Axle
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana 60 Dana 70 Differentials
- 35 Spline
- Measures 12 in. Long
- Heavy Duty 4340 Chromoly Construction
- Uses 5-332X Series U-Joint
- Front Outer Axle
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W46100
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Chevrolet K30 | Front Outer |
- Yukon friction modifier/Posi additive
- Positraction Additive; 4 oz.
- Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
- Friction Modifier
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
- Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Chevrolet C20 |
- Yukon Pinion install kit for Dana 60 front differential
- Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Standard Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
- Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
- Pinion Install Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
- Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Chevrolet K30 |
Showing 1 - 10 of 34 products
Loading...