Image
Product
Price
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Dodge W250 | V | - | Front | 8 Cyl 5.9L | 360 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Dodge W250 | V | - | Rear | 8 Cyl 5.9L | 360 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Disconnect Design; 30 Spline; 3.73 And Down~Dana 44; Standard Rotation; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1988 - Dodge Ramcharger | V | 5211 | Front | 8 Cyl 5.2L | 4WD | 318 |
- Yukon standard open spider gear kit for Model 35 with 27 spline axles
- Dana 35; 27 Spline; 1.560 in. Side Gear Bore AMC Model 35; Dana 35; 27 Spline; 1.560 in. Side Gear Bore~Model 35; Dana 35; Standard Open Spider Gear Kit; 27 Spline; 1.560 in. Side Gear Journal
- Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
- Spider Gear Set
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits AMC Model 35 Open Differential w/1.560 in. Side Gear Bore
- Spider Gear Kit
- Includes Two Side Gears
- Two Pinion Gears
- Cross Pin Shaft
- Cross Pin Bolt And Spider Gear Thrust Washers
- Yukon Gear & Axle spider gear kits feature higher quality materials and better manufacturing techniques than OEM to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.
This Part Fits the Following OEM/Substitute Numbers:
ZIKM35-S-27-1.5
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 1988 - Jeep Comanche | Laredo | 4WD |
- Yukon Pinion install kit for Dana 60 front differential
- Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Standard Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
- Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
- Pinion Install Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
- Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Dodge W350 |
- Yukon Chromoly Front Axle Kit; Dana 30; Both Sides; 27 Spline; 1310 U-Joints
- 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints Dana 30 Front Axle Kit; 4340 Chrome-Moly Shafts; 27 Spline Inner and Outer Axles; Spicer U-Joints; and Disconnect Block Off Kit with Axle Seals~Dana 30; Reverse Rotation; 4340 Chrome-Moly Replacement; 27 Spline; Fits Dana 30/Reverse/Super; Includes Spicer U-Joints
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Jeep Wrangler And Cherokee Front w/Dana Spicer 30
- Front Axle Kit
- 4340 Chromoly Axles
- 27 Spline Inner Axles
- Includes Inner And Outer Axle Shafts w/Spicer U-Joints
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W24110
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Jeep Cherokee | Front | 4WD |
- High performance Yukon Ring/Pinion gear set for Ford 9in. in a 4.11 ratio
- 9 in. 10 Bolt; 4.11 Ratio Ford 9 in.; 4.11 Ratio~Ford 9 in.; Ring and Pinion Set; 4.11 Ratio; 28 Spline Pinion
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 9 In.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
-
Features:
- Fits Ford 9 In.
- 28 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 9.00 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG F9-411
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Ford E-150 Econoline | V | 5753 | Rear | 8 Cyl 5.8L | 351 |
- Yukon Rear Axle Bearing/Seal Kit for Various Differentials
- 8.2 in./8.5 in. 10 Bolt; AMC 35 Reverse/AMC 35/AMC 20; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles Ford 7.5 in.; Torrington Brand; 2.250 in. OD; For Use w/C-Clip Axles
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.250 in. Outer Diameter
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Ford Bronco II | Rear |
- Replacement inner axle seal
- 8.25 in. 10 Bolt; AMC 35; Dana 44/30 Reverse; 8.25 in. 10 Bolt; AMC 35; Dana 44/30 Reverse; Front Inner
- Replacement inner axle seal (conversion seal). Yukon Mighty seal.
- Yukon Mighty Axle Seal
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 30 w/30 Spline Upgrade
- Front Inner Axle Seal
- Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Jeep Wrangler | L | - | Front Inner | 4 Cyl 2.5L | 150 |
- Yukon Axle Bearing/Seal Kit for Dana 44/Model 20
- AMC 20; Timken Brand; Some Flanged Dana 44; Timken Brand; Some Flanged
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Jeep Wagoneer | Rear |
Showing 1 - 10 of 128 products
Loading...