2003 Dodge Yukon Gear Parts
Choose a Model for your 2003 Dodge
Image
Product
Price
- Yukon Master Overhaul kit for 2010/down GM/Dodge 11.5in. differential
- 11.5 in. 11.5 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; 4.125 in. OD Pinion Bearing Race (HM807010)~Chrysler 11.5 in.
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Gm 11.5 In.
-
Features:
- Fits 2010 And Down GM And Chrysler 11.5 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Are Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Pinion Nut
- Thread Locker
- Marking Compound w/Brush And Silicone
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
This Part Fits the Following OEM/Substitute Numbers:
ZK GM11.5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | RWD | 359 |
- Yukon Rear Axle Bearing/Seal Kit for Various Differentials
- 8.8 in./8.5 in./8.6 in. 10 Bolt; AMC 35; Torrington Brand; 2.530 in. OD. Chrysler 8.25 in.; C213R/C213RE; Torrington Brand; 2.530 in. OD.~Chrysler 8.25 in.; Torrington Brand; 2.530 in. OD.~Chrysler 9.25 in.; Torrington Brand; 2.530 in. OD.
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.530 in. Outer Diameter
- 1.618 in. Inner Diameter
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Dodge Durango | Rear |
- Upper ball joint for Chrysler 9.25in. front
- 9.25 in.; Chrysler 9.25 in.; Upper
- Upper ball joint for Chrysler 9.25in. front
- Ball Joint
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Upper Ball Joint For Chrysler 9.25 in.
- Services One Side
- Restore the precise steering control of your vehicle by replacing its worn and failing ball joints with durable Yukon units. Yukon ball joints are constructed from high-quality materials and engineered to meet or exceed OE specs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Dodge Ram 3500 | Upper | 4WD |
- Yukon Master Overhaul kit for 01/up Chrysler 9.25in. rear differential
- 9.25 in. 12 Bolt; Rear Chrysler 9.25 in.~Chrysler 9.25 in. Rear; Differential Rebuild Kit; Timken Bearings
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Chrysler 9.25 In.
-
Features:
- Fits 2001 And Up Chrysler 9.25 in. Rear
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Kit Are Carrier Bearings And Races
- Pinion Bearings And Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Silicone
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
This Part Fits the Following OEM/Substitute Numbers:
ZK C9.25-R-B
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2003 - Dodge Dakota | V | 3906 | 6 Cyl 3.9L | Base | RWD | 239 |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Dodge Ram 1500 | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Dodge Ram 2500 Van | Front |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Dodge Ram 1500 | Front Right | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Dodge Ram 1500 Van | Center |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2003 - Dodge Ram 1500 | Rear Driveshaft at Transfer Case | 4WD |
- Yukon 1310 U/Joint with zerk fitting on cross.
- 1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~Chrysler 8.25 in.
- Yukon 1310 U/Joint with zerk fitting on cross. 3.219in. snap ring span; 1.062in. cap diameter. Outside snap ring.
- U-Joint
- Product Attributes:
- WARNING CA Proposition 65: No
- Quantity Sold: 1
-
Features:
- Yukon Products Are Held To The Highest Quality Standards In The Industry
- Engineered Using State-Of-The-Art Design Software
- Units Are Inspected To Ensure Precise Accuracy And Fitment
- Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Dodge Durango | Front Left |
Showing 1 - 10 of 42 products
Loading...