Image
Product
Price
- Yukon Master Overhaul kit for 2010/down GM/Dodge 11.5in. differential
- 11.5 in. 11.5 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; 4.125 in. OD Pinion Bearing Race (HM807010)~Chrysler 11.5 in.
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Gm 11.5 In.
-
Features:
- Fits 2010 And Down GM And Chrysler 11.5 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Are Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Pinion Nut
- Thread Locker
- Marking Compound w/Brush And Silicone
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
This Part Fits the Following OEM/Substitute Numbers:
ZK GM11.5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2005 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 4WD | 359 |
- Yukon Gear/Install Kit package for Jeep TJ Rubicon; 4.56 ratio.
- 4.56 Ratio; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kit 4.56 Ratio; Re-ratio Kit; Includes Front And Rear Ring And Pinion Sets; Master Overhaul Kits
- Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
- Yukon Gear And Install Kit
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model:
- Amc 35
- Dana 30 Standard
- Dana 44 Standard 30 Spline
- Dana 60
-
Features:
- Fits Jeep TJ Rubicon
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 4.56 Ratio
- Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.
This Part Fits the Following OEM/Substitute Numbers:
ZGK009
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2005 - Jeep Wrangler | L | - | 6 Cyl 4.0L | Rubicon | 242 |
- 7.2IFS GM standard Open loaded case 3.23/up.
- 7.25 in./7.2 in.; Standard Open loaded Case; IFS; 3.23 And Up GM 7.2 in.; IFS; Standard Open loaded Case; IFS; 3.23 And Up
- 7.2IFS GM Standard Open loaded case 3.23/up.
- Carrier Case
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits GM 7.2 in. IFS
- Includes Spider Gears
- 3.23 And Down Ratio Only
- Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case is loaded with spider and side gears.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2005 - Chevrolet Express 2500 | V | 5328 | Front | 8 Cyl 5.3L | Base | AWD | 325 |
- 7.2IFS GM standard Open loaded case 3.23/up.
- 7.25 in./7.2 in.; Standard Open loaded Case; IFS; 3.23 And Up GM 7.2 in.; IFS; Standard Open loaded Case; IFS; 3.23 And Up
- 7.2IFS GM Standard Open loaded case 3.23/up.
- Carrier Case
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits GM 7.2 in. IFS
- Includes Spider Gears
- 3.23 And Down Ratio Only
- Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life. This case is loaded with spider and side gears.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2005 - GMC Savana 2500 | V | - | Rear | 6 Cyl 4.3L | Base | AWD | 262 |
- Yukon Rear Axle Bearing/Seal Kit for GM
- 8.6 in. 10 Bolt; Torrington Brand; 2.800 in. OD. GM 8.6 in.; Torrington Brand; 2.800 in. OD.~GM 9.5 in.; 14 bolt cover; Torrington Brand; 2.800 in. OD.
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.800 in. Outer Diameter
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2005 - Chevrolet Silverado 1500 | Rear | LS | RWD |
- Yukon Master Overhaul kit for 2010/down GM/Dodge 11.5in. differential
- 11.5 in. 11.5 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; 4.125 in. OD Pinion Bearing Race (HM807010)~GM 11.5 in.
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Gm 11.5 In.
-
Features:
- Fits 2010 And Down GM And Chrysler 11.5 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Are Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Pinion Nut
- Thread Locker
- Marking Compound w/Brush And Silicone
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2005 - Chevrolet Silverado 3500 | V | - | 8 Cyl 8.1L | 4WD | 496 |
- Yukon Master Overhaul kit for 09/down Ford 8.8in. differential.
- 8.8 in. 10 Bolt Ford 8.8 in.~Ford 8.8 in.; Differential Rebuild Kit; Timken Bearings; Uses M802048/ M802011 Inner Pinion Bearing (3.250 in. OD Race)
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Ford 8.8 In.
-
Features:
- Fits 2009 And Down Ford 8.8 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Carrier Bearings/Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Ring Gear Bolts
- Pinion Nut
- Crush Sleeve
- Thread Locker
- Marking Compound w/Brush And Gasket
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Mercury Grand Marquis | V | - | 8 Cyl 4.6L | 281 |
- Yukon Rear Axle Bearing/Seal Kit for Various Differentials
- 8.8 in./8.5 in./8.6 in. 10 Bolt; AMC 35; Torrington Brand; 2.530 in. OD. Ford 8.8 in.; Torrington Brand; 2.530 in. OD.~Ford 9.75 in.; Torrington Brand; 2.530 in. OD.
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.530 in. Outer Diameter
- 1.618 in. Inner Diameter
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Ford E-150 | Rear |
- High performance Yukon Ring/Pinion gear set for Ford 8.8in. in a 3.73 ratio
- 8.8 in. 10 Bolt; 3.73 Ratio Ford 8.8 in. Rear; Ring and Pinion Set; 3.73 Ratio; 30 Spline Pinion~Ford 8.8 in.; IRS; 3.73 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Ford 8.8 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
-
Features:
- Fits Standard Rotation Ford 8.8 in.
- 8.80 in. Ring Gear Diameter
- 3.73 Ratio
- 30 Spline Pinion
- 10 Ring Gear Bolts
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2005 - Ford Expedition | V | - | Rear | 8 Cyl 5.4L | RWD | 330 |
- Yukon Pinion install kit for Dana 60 front differential
- Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Reverse Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
- Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
- Pinion Install Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
- Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.
Additional Fitment Information:
| Vehicle |
|---|
| 2005 - Ford F-250 Super Duty |
Showing 1 - 10 of 112 products
Loading...