Image
Product
Price
- Yukon Master Overhaul kit for 2010/down GM/Dodge 11.5in. differential
- 11.5 in. 11.5 in. Rear; Master Overhaul Kit; Differential Rebuild Kit; Timken Bearings; 4.125 in. OD Pinion Bearing Race (HM807010)~Chrysler 11.5 in.
- Yukon Master Overhaul kits give you all the high quality parts you need to start/finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
- Yukon Differential Master Overhaul Kit
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Model: Gm 11.5 In.
-
Features:
- Fits 2010 And Down GM And Chrysler 11.5 in.
- Includes Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
- Includes Are Carrier Bearings And Races
- Pinion Bearings/Races
- Pinion Seal
- Complete Shim Kit
- Includes Pinion Nut
- Thread Locker
- Marking Compound w/Brush And Silicone
- Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
This Part Fits the Following OEM/Substitute Numbers:
ZK GM11.5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Ram 2500 | L | - | 6 Cyl 6.7L | SLT | 4WD | 408 |
- High performance Yukon Ring/Pinion gear set for GM/Chy 11.5in. Rear in a 3.73
- 11.5 in.; 3.73 Ratio 11.5 in. Rear; Ring and Pinion Set; 3.73 Ratio~Chrysler 11.5 in.; 3.73 Ratio
- Yukon engineers use state-of-the-art design; advanced heat-treating techniques; and leading-edge quality testing processes to ensure the structure and surface finish of our gear sets meet exacting specifications and quality standards.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Gm 11.5 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
-
Features:
- Fits GM And Chrysler 11.5 in.
- 30 Spline Pinion
- 3.73 Ratio
- 12 Ring Gear Bolts
- 11.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG GM11.5-373
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Dodge Ram 2500 | L | - | Rear | 6 Cyl 6.7L | RWD | 408 |
- Upper ball joint for Chrysler 9.25in. front
- 9.25 in.; Chrysler 9.25 in.; Upper
- Upper ball joint for Chrysler 9.25in. front
- Ball Joint
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Upper Ball Joint For Chrysler 9.25 in.
- Services One Side
- Restore the precise steering control of your vehicle by replacing its worn and failing ball joints with durable Yukon units. Yukon ball joints are constructed from high-quality materials and engineered to meet or exceed OE specs.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - Dodge Ram 1500 | Upper | ST | 4WD |
- Yukon Ring/Pinion Gear Set for Toyota Front 8in. in 4.11 Ratio
- Toyota 8 in. Front; IFS Clamshell; Reverse Rotation; Ring and Pinion Set; 4.11 Ratio; 29 Spline Pinion; Fits 3.91 & Up Carrier
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Differential Ring and Pinion
- Product Attributes:
- Axle Type: Chrysler 11.5 In.
- Gear Ratio:
- 4
- 4.11
- WARNING CA Proposition 65: No
-
Features:
- For Toyota Front 8 in.
- Engineered For The Harshest Conditions
- 4.11 Ratio
- All Yukon Ring Pinion Sets Come Standard w/A One-Year Warranty
- 10 Ring Gear Bolts
- Ring Pinion Set
- Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon Engineers use state-of-the art design & testing processes, backed by 2 in-house quality labs to ensure each item manufactured meets exacting specifications & quality standards. Yukon designed gear tooth surface finish reduces both friction & heat for long races & high torque conditions. We use high grade steel in both the ring & pinion, with fitment designed to OEM specs. Go ahead, add loads of horsepower & go big on tires because Yukon offers the widest selection of gear ratios to choose from. You'll know that your gear choice was the right one, because you chose Yukon. Yukon Ring & Pinions come with a 1 year warranty against manufacture defects. Yukon offers a Y.E.S. Plan for a lifetime, comprehensive, no-questions-asked protection plan covering your gears for as long as you own the vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Toyota FJ Cruiser | V | 3956 | Front | 6 Cyl 4.0L | 4WD | 241 |
- Yukon friction modifier/Posi additive
- Positraction Additive; 4 oz.
- Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
- Friction Modifier
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
- Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Toyota Sequoia |
- 8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
- 8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
- Yukon Dura Grip Differential
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2010 - GMC Savana 1500 | Front | LT | RWD |
- 8.5in./8.6in. GM 2.73/Up Dura Grip Limited Slip; 30spl; Composite Clutches
- 8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.6 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 & 8.6 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction; giving you the confidence and performance you need across a wide variety of terrains.
- Yukon Dura Grip Differential
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits 8.5 in./8.6 in. GM w/30 Spline Axles
- Fits 2.73 Gear Ratio Up
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Chevrolet Express 1500 | V | 5328 | Rear | 8 Cyl 5.3L | RWD | 325 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.6 in.; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
26066706
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Cadillac Escalade | V | 5967 | Front | 8 Cyl 6.0L | AWD | 364 |
- Yukon Ring and Pinion Gear Set for GM 8.5in./8.6in. Differentials; 3.73 Ratio
- 8.5 in./8.6 in. 10 Bolt; 3.73 Ratio GM 8.5 & 8.6 in.; 10 Bolt; Ring and Pinion Set; 3.73 Ratio~GM 8.6 in.; 3.73 Ratio
- Yukon Gear/Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers accomplish this by using state-of-the art design; heat-treating techniques; and quality testing.
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Gm 8.5 In.
- Gm 8.6 In.
- Gear Ratio: 3.73
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits GM 8.5 in. And 8.6 in.
- 30 Spline Pinion
- 3.73 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2010 - Chevrolet Express 1500 | V | 5328 | Rear | 8 Cyl 5.3L | RWD | 325 |
- Finned aluminum cover for Dodge/GM 11.5in. AAM Rear Axle
- 11.5 in.; Finned; Polished Aluminum Chrysler 11.5 in.; Finned; Polished Aluminum
- AAM 11.5in. Finned aluminum cover for Dodge/GM
- Differential Cover
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits Chrysler And GM 11.5 in.
- Finned Aluminum
- These Yukon replacement diff covers take your rig a step beyond the boring factory look. They are the stock OE design made from aluminum and polished to perfection.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2010 - Dodge Ram 2500 | Rear | RWD |
Showing 1 - 10 of 149 products
Loading...