Image
Product
Price
- Yukon friction modifier/Posi additive
- Positraction Additive; 4 oz.
- Help keep Positraction chatter down with Yukon s popular friction modifier (Posi additive) for limited slip differentials with composite clutches like the Yukon Dura Grip.
- Friction Modifier
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- For Use In Any Clutch-Style Limited Slip
- Positraction Additive
- Yukon Limited Slip Friction Modifier is a proprietary Yukon blend that reduces noise and chatter in clutch driven positraction units and limited slip differentials. As clutch packs wear they can develop a chatter, our Modifier enhances the abrasive properties of the clutches to retain stock-like engagement. Formulated for composite clutches, like those found in Yukon Dura Grip LSDs, Yukon Limited Slip Friction Modifier will outperform parts store grade modifiers because they are formulated for OEM paper-style clutches and contain one-fifth the abrasive chemicals.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Jeep Grand Cherokee |
- Yukon Replacement Front standard Open Carrier Case for Jeep JK D30
- D30; bare case without internal gears; fits 3.73 and up gear ratios~Dana 30 JK Front. Bare Std. Open Carrier Case without Internal Gears. Fits 3.73 and up gear ratios
- Yukon replacement standard open carrier case for Dana 30 JK front; 3.73/up
- Differential Carrier Cases
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Jeep JK
- Dana 30
- 3.73 And Up
- Front
- Replacement Front Standard Open Carrier Case
- Yukon Gear & Axle manufactures a full line of standard open and positraction limited slip carrier cases for a variety of applications. Each unit is cast and machined to exacting specifications to produce a carrier that provides both high strength and tight tolerances for a long and reliable service life.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | Unlimited Sport | 220 |
- Yukon Rear Axle Bearing/Seal Kit for Dana 44JK
- Dana 44; One Side; Replacement Dana 44 JK Rear; Axle Bearing and Seal; One Side; Replacement;~Dana 44; JK Rubicon; One Side; Replacement~Dana 44; Non-Rubicon JK; One Side; Replacement
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - Jeep Wrangler | Rear |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 4.88
- Dana 30; Short Reverse Pinion; 4.88 Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 4.88 Gear Ratio~Dana 30; Short Reverse Pinion; 4.88 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 4.88
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 4.88 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-488JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- Yukon Chromoly Front Axle Kit; JK Rubicon Dana 44; 30/32 Spline; 7166 U-Joint
- 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Dana 44; Includes Spicer U-Joints Dana 44. JK Rubicon; Front Axle Kit; 4340 Chrome-Moly; 30 Spline Inner; 32 Spline Outer; Includes Spicer U-Joints~Dana 44; Reverse Rotation; 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Includes Spicer U-Joints
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Kit
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 44 in. JK Rubicon
- 30 Spline Inner And 32 Spline Outer
- Includes Inner And Outer 4340 Chromoly Axles And Spicer U-Joints
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W24168
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - Jeep Wrangler | Front |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion; 4.11
- Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-411JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 5.13
- Dana 30; Short Reverse Pinion; 5.13 Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 5.13 Gear Ratio~Dana 30; Short Reverse Pinion; 5.13 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 5.13
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 5.13 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-513JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 5.13
- Dana 30; Short Reverse Pinion; 5.13 Ratio Dana 30; Short Reverse Pinion; 5.13 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 5.13
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 5.13 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon replacement Ring/Pinion set for Dana 44JK in a 4.88
- Dana 44; 4.88 Ratio; Thick Gear Dana 44. JK Rear; Ring and Pinion Gear Set; 4.88 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; 4.88 Ratio; Thick Gear~Dana 44; Non-Rubicon JK; 4.88 Ratio; Thick Gear
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 4.88
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 44 JK Rear
- 24 Spline Pinion
- 4.88 Ratio
- 10 Ring Gear Bolts
- 8.89 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D44JK-488RUB
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Rear | 6 Cyl 3.6L | 220 |
- High performance Yukon replacement Ring/Pinion set for Dana 44JK in a 4.56
- Dana 44; High Performance Replacement; 4.56 Gear Ratio Dana 44. JK Rear; Ring and Pinion Gear Set; 4.56 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; High Performance Replacement; 4.56 Gear Ratio~Dana 44; Non-Rubicon JK; High Performance Replacement; 4.56 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 4.56
- WARNING CA Proposition 65: No
-
Features:
- Fits Reverse Rotation Dana Spicer 44 JK Rubicon
- 24 Spline Pinion
- 4.56 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Fits Dana Spicer 44 JK Rear
- 8.89 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D44JK-456RUB
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Jeep Wrangler | V | 3604 | Rear | 6 Cyl 3.6L | 220 |
Showing 1 - 10 of 95 products
Loading...