Image
Product
Price
- Yukon Gear/Install Kit package for Jeep JK Rubicon; 4.11 ratio.
- 4.11 Ratio 4.11 Ratio
- Gear kits from Yukon Gear/Axle include ring/pinion gears/Master Overhaul kits that ensure the perfect fit for your application. Yukon kits include front/rear ring/pinion sets; and the industry s most complete master overhaul kits
- Yukon Gear And Install Kit
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
- Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Warnings: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Model: Chrysler 11.5 In.
-
Features:
- Fits Jeep Rubicon JK
- Includes Front And Rear Ring Pinion Sets And Master Overhaul Kits
- 4.11 Ratio
- Yukon Gear Kits combine all the parts you need for your re-gear project. It delivers front and rear ring and pinion gear sets and the proper Yukon Master Overhaul Kits in one single part number. Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set kit for as long as you own your vehicle. If you are thinking about increasing tire size, looking for more towing power, enhancing off-road prowess, or just replacing worn gears, these convenient combo kits have everything your vehicle will need.
This Part Fits the Following OEM/Substitute Numbers:
ZGK056
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | 6 Cyl 3.6L | Rubicon | 220 |
- Yukon Rear Axle Bearing/Seal Kit for Dana 44JK
- Dana 44; One Side; Replacement Dana 44 JK Rear; Axle Bearing and Seal; One Side; Replacement;~Dana 44; JK Rubicon; One Side; Replacement~Dana 44; Non-Rubicon JK; One Side; Replacement
- Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
- Axle Bearing/Seal Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Includes Axle Bearing And Seal
- Services One Side
- Yukon Provides Top Quality Replacement Bearings For Front And Rear Applications
- Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Jeep Wrangler | Rear |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 4.88
- Dana 30; Short Reverse Pinion; 4.88 Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 4.88 Gear Ratio~Dana 30; Short Reverse Pinion; 4.88 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 4.88
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 4.88 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-488JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- Yukon Chromoly Front Axle Kit; JK Rubicon Dana 44; 30/32 Spline; 7166 U-Joint
- 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Dana 44; Includes Spicer U-Joints Dana 44. JK Rubicon; Front Axle Kit; 4340 Chrome-Moly; 30 Spline Inner; 32 Spline Outer; Includes Spicer U-Joints~Dana 44; Reverse Rotation; 4340 Chrome-Moly Replacement; 30 Spline Inner; 32 Spline Outer; Fits Includes Spicer U-Joints
- Yukon performance axles are built with high-tensile strength 4340 chromoly; use superior production methods that include cold roll formed splines; and feature advanced heat treating to create an axle of unmatched quality and durability.
- Axle Kit
- Product Attributes:
- Axle Type: Dana 44
- WARNING CA Proposition 65: No
-
Features:
- Fits Dana Spicer 44 in. JK Rubicon
- 30 Spline Inner And 32 Spline Outer
- Includes Inner And Outer 4340 Chromoly Axles And Spicer U-Joints
- Yukon high-performance axles are built with high-tensile strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature advanced induction coil heat treating to create an axle of unmatched quality and durability.
This Part Fits the Following OEM/Substitute Numbers:
ZA W24168
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Jeep Wrangler | Front |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion; 4.11
- Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 4.11 Gear Ratio~Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-411JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion; 4.11
- Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio Dana 30; High Performance Replacement; Short Reverse Pinion; 4.11 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 4.11
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 4.11 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 5.13
- Dana 30; Short Reverse Pinion; 5.13 Ratio Dana 30. JK Front; Short Reverse; Ring and Pinion Set; 5.13 Gear Ratio~Dana 30; Short Reverse Pinion; 5.13 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 5.13
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 5.13 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D30SR-513JK
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon Ring/Pinion gear set Dana 30 JK Short Rev Pinion 5.13
- Dana 30; Short Reverse Pinion; 5.13 Ratio Dana 30; Short Reverse Pinion; 5.13 Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type:
- Dana 30
- Dana 30 Rev.
- Gear Ratio: 5.13
- WARNING CA Proposition 65: No
- Axle Type:
-
Features:
- Fits Reverse Rotation Dana Spicer 30 in. Jeep JK
- 24 Spline Pinion
- 5.13 Ratio
- 10 Ring Gear Bolts
- 7.33 in. Ring Gear Diameter
- Short Pinion
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Front | 6 Cyl 3.6L | 220 |
- High performance Yukon replacement Ring/Pinion set for Dana 44JK in a 4.56
- Dana 44; High Performance Replacement; 4.56 Gear Ratio Dana 44. JK Rear; Ring and Pinion Gear Set; 4.56 Ratio; 24 Spline Pinion; Double Drilled for 7/16 in. & 1/2 in. Ring Gear Bolts~Dana 44; JK Rubicon; High Performance Replacement; 4.56 Gear Ratio~Dana 44; Non-Rubicon JK; High Performance Replacement; 4.56 Gear Ratio
- Yukon Gear/Axle high performance ring/pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat; and use high grade steel in both the ring/pinion; with fitment designed to OEM spec
- Ring And Pinion Gear Set
- Product Attributes:
- Axle Type: Dana 44
- Gear Ratio: 4.56
- WARNING CA Proposition 65: No
-
Features:
- Fits Reverse Rotation Dana Spicer 44 JK Rubicon
- 24 Spline Pinion
- 4.56 Ratio
- 10 Ring Gear Bolts
- 8.50 in. Ring Gear Diameter
- Fits Dana Spicer 44 JK Rear
- 8.89 in. Ring Gear Diameter
- Yukon Gear & Axle high-performance ring and pinion gear sets are the benchmark of quality in the automotive gear industry. Yukon engineers use state-of-the art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish meet exacting specifications and quality standards. Yukon offers its Y.E.S. Plan, a lifetime, comprehensive, no-questions-asked protection plan covering your gear set for as long as you own your vehicle. Whether you've added tons of horsepower under the hood, upgraded to bigger tires, are just want to optimize the traction performance of your ride, Yukon offers the widest selection of gear ratios on the market to accommodate every need.
This Part Fits the Following OEM/Substitute Numbers:
ZG D44JK-456RUB
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Rear | 6 Cyl 3.6L | 220 |
- Dana 44 3.73/Down Dura Grip Limited; Slip 30spl; IFS w/YSPSPR-001 Spring Kit
- GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Non-Rubicon JK; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44 Rear. JK Non-Rubicon; 30 Spline;
- Dana 44 3.73/Down Yukon Dura Grip Limited Slip; 30 Spline; Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
- Dura Grip Positraction
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
-
Features:
- Fits Dana Spicer 44 w/30 Spline Axles
- Fits 3.73 Gear Ratio Down [Also Fits Thick Gears]
- Fully Rebuildable Design And Proudly Assembled In The USA
- Limited Slip Differential w/Composite Clutches
- All Units Are Backed By Extensive Product Testing And State-Of-The-Art Software Design
- Yukon Dura Grips Feature 4320 Chromoly Spider Gears For Ultimate Durability
- Gears Are Cut To Provide The Strongest Teeth Possible In Any Terrain
- Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains. The Dura Grip is engineered for long life and is completely rebuildable. Dura Grips are constructed with a high strength nodular case, forged 4320 chromoly spider gears, and composite clutches. For unmatched positraction performance, the Dura Grip is the ultimate choice. When your vehicle demands performance, durability and strength, choose Yukon Dura Grip.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Jeep Wrangler | V | 3604 | Rear | 6 Cyl 3.6L | 220 |
Showing 1 - 10 of 95 products
Loading...