Image
Product
Price
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan B110 |
- WIX Fuel (Complete In-Line) Filter
- Metal In-Line Filter without Vapor Diverter
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 1.936
- Duty Type: Ld
- Micron: 20.00
- Style: Fuel (complete In-line) Filter
- Class: A
- Outlet: 5/16
- Burst Pressure: 60
- Ends: Metal
- Media Material: Cellulose
- Inlet: 5/16
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0 986 450 012, 00 05 490 862, 001 477 38 01, 01511, 0222-13470-B, 022213478, 025RAC05, 039313, 0430025, 0430116, 0430124, 0430813, 049442, 05821214, 078851, 080105, 0986450999, 10034G1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1970 - Nissan 1600 | L | 1595 | Canada | 4 Cyl 1.6L | - |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 1600 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Production: 10/1969-
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1970 - Nissan 240Z | Fr:10-00-69 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 240Z |
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 510 |
Additional Fitment Information:
| Vehicle | Prod. Date Range |
|---|---|
| 1970 - Nissan 521 Pickup | Fr:07-00-69 |
- Custom Racing Assembly
- Fits w/1969-81 Austin Maxi/75-77 Triumph 2500/70-84 Nissan Bluebird/240C/100A/65-75 Rover Austin Morris/MGC; Round; H-2.125 in.; ID-4.875 in.
- K/N Custom Air Filter kits are designed to boost the performance from your carburetor while keeping dirt on the outside where it belongs. These assemblies come with custom chrome top and base plates and a K/N washable air filter.
- Racing Custom Air Cleaner
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Overall Height: 2.250 In. (57mm)
- Air Filter Height: 2.125 In. (54mm)
- Mounting Hardware Included: Yes
- Inlet Diameter: 1.625 In. (41mm)
- WARNING CA Proposition 65: Yes
- Replacement Filter: E-9143
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 3.500 In. (89mm)
- Filter Material: Cotton Gauze
- Neck Flange: 1.625 In. (41mm)
- Product Box Width: 6.310 In. (160mm)
- Product Box Length: 6.560 In. (167mm)
- Prop 65 (C, R or CR): Cr
- Top Style: Metal
- Air Filter Inside Diameter: 4.875 In. (124mm)
- Top Material: Chrome
- Size: 6-8
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Oval
- CARB/Air Horn Diameter: N/a
- Air Filter Element Washable: Yes
- Shape: Round
- Package Material: Paperboard
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
-
Features:
- Designed To Increase Horsepower And Acceleration
- Show Quality With Custom Chrome Top and Base
- Washable And Reusable Air Filter
- High Air Flow With Excellent Filtration
- One Year Limited Warranty
- K&N Custom Air Filters for Single or Two Barrel Carburetors - K&N custom air filter kits are designed to boost performance from your carburetor while keeping the dirt on the outside where it belongs. These assemblies come with custom chrome top and base plates and the famous K&N High-Flow Washable Air Filter.
Additional Fitment Information:
| Vehicle |
|---|
| 1970 - Nissan 240Z |
Showing 1 - 8 of 8 products
Loading...