Image
Product
Price
- Locking Fuel Cap
- Vented Black Cap
- Locking
- Product Attributes:
- Vented: Yes
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10582, 11582, 12F14L, 31761, 40782, 5782, 703-1841, 9MGC782, G782, MGC782, MGC782SK, P5782
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Mazda B1800 | L | 1796 | 4 Cyl 1.8L | 110 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda GLC |
- WIX Fuel (Complete In-Line) Filter
- Metal In-Line Filter without Vapor Diverter
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 1.936
- Duty Type: Ld
- Micron: 20.00
- Style: Fuel (complete In-line) Filter
- Class: A
- Outlet: 5/16
- Burst Pressure: 60
- Ends: Metal
- Media Material: Cellulose
- Inlet: 5/16
- WIX Fuel Filters provide excellent engine protection for normal and severe driving conditions such as dirt roads, construction sites, stop and go traffic, short trips, and interstate travel. WIX filters are recommended for OEM fuel filter change intervals. WIX offers high quality, high efficiency media specific to the application and fuel type being used. Superior materials, design and construction ensure WIX fuel filters provide excellent performance under all types of operating conditions.
This Part Fits the Following OEM/Substitute Numbers:
0 986 450 012, 00 05 490 862, 001 477 38 01, 01511, 0222-13470-B, 022213478, 025RAC05, 039313, 0430025, 0430116, 0430124, 0430813, 049442, 05821214, 078851, 080105, 0986450999, 10034G1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Mazda GLC | L | 1272 | Canada | 4 Cyl 1.3L | - |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda Cosmo |
- FRAM, G12, Fuel Filter
- In-Line Fuel Filter Filter only Unit box product
- FRAM
- Product Attributes:
- Fuel Type: Gasoline
- Primary Or Secondary: Primary
- Inlet Outside Diameter: 0.3125
- Mounting Type: Cartridge
- Outlet Outside Diameter: 0.3125
- Fitting Type: Cartridge
This Part Fits the Following OEM/Substitute Numbers:
10091791, ALG-894/2, E9BZ-9155-A, FF689, FG1011, G497, GF226, GF580L, GF687
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda B1800 |
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda GLC |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Plastic Body
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda RX-4 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- OE Equivalent
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda B1800 |
- Fuel Filter
- OD 1.688 in.; 3.813 in.; 5/16 Barbed Inlet/Outlet In-line Filter~Fuel Filter
- K/N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements.
- In-Line Gas Filter
- Product Attributes:
- Automotive Item Grade: High Performance
- Package Contents: 1 Fuel Filter
- WARNING CA Proposition 65: No
- Length: 3.813 In. (97mm)
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Package Quantity: 1
- Product Box Height: 5.000 In. (127mm)
- Filter Material: Cellulose Media
- Product Box Width: 3.100 In. (79mm)
- Package Material: Paperboard
- Product Box Length: 3.200 In. (81mm)
- Inlet Type: Single
- Outside Diameter: 1.688 In. (43mm)
- Fitting Type:
- 0.3125 In. Npt
- Not Applicable
- Package Type: Box
- Package Content: 1
- Outlet Type: Single
-
Features:
- Superior Construction
- Low Restriction
- Large Capacity
- Outstanding Filtration
- K&N Performance Fuel Filters are built for high flow rates and capacity while they provide outstanding filtration. They have a high strength carbon steel housing and a high performance rolled seam that exceeds OEM pressure requirements. Their high performance cellulose glass media traps contaminants such as rust, dirt, scale and other foreign materials.
This Part Fits the Following OEM/Substitute Numbers:
0014773801, 0014773901, 022213470, 022213470A, 022213470B, 022213478, 0430124, 0450904004, 10034G1, 105483206102, 1130000, 1131700, 1139803, 1139815, 1200526, 120410, 120678, 13200250...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Mazda B1800 | L | 1796 | 4 Cyl 1.8L | 110 |
- Replacement Air Filter
- Round; H-2 3/16 in.; ID-8.5 in.; OD-10.5 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s 10-Year/Million Mile Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.700 Lbs. (0.8 Kg)
- Machine Washable: Yes
- Product Box Height: 3.630 In. (92mm)
- Filter Material: Cotton Gauze
- Inside Diameter: 8.500 In. (216mm)
- Product Box Width: 12.250 In. (311mm)
- Product Box Length: 12.250 In. (311mm)
- Outside Diameter: 10.500 In. (267mm)
- Item Height: 2.188 In. (56mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: None
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Package Contents: 1 Air Filter
- Top Material: None
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Shape: Round
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 0.92 Oz (27 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
030523603, 0421164, 17220689003, 42912, 87349, A1207, A216, A40016, A704C, AF307, AF807, C29631, CA2740, DA307, FA676, HPR2740, MA16, PA2075...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1978 - Mazda B1800 |
Showing 1 - 10 of 10 products
Loading...