1969 Subaru Air-and-Fuel-Delivery Parts
Image
Product
Price
- Champion Copper Plus Small Engine- Boxed - L87YC
- Gap 0.024in OE Type ; Plug Type L87YC
- Champion Copper Plus Small Engine 312 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.5
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Removable Nut
- Manufacturer Heat Range: 87
- Pre-Gap Size:
- 0.025
- 0.64
- Classification: Champion Copper Plus Small Engine
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.06
- Plug Type: L87yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14E32, 42-6FS, 4232, AE32, BP6HS, BP6HS10, E6TC, L87YC, S426FS, W20FPU, W22FPU, W6B, W6BC, W7B, W7BC, WR7BP
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Subaru 360 | L | 358 | 2 Cyl 0.4L | 22 |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio:
- 5 To 7
- 50:50
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: Concentrate
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula
- Includes patented Prestone CorGuard technology, our best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Concentrate formula. Must mix with distilled to the desired mix ratio of EG & water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Subaru 360 |
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- Flash Point:
- 104
- 220
- Biodegradable: No
- Phosphate Free: Yes
- Size: 1
- Standards: Astm D3306, D4985
- Organic Acid Technology Based: Yes
- Propylene Glycol Formulation: No
- Freezing Point:
- -34
- -37
- Recommended Dilution Ratio: No Dilution Required
- Ethylene Glycol: Yes
- Color: Yellow
- Boiling Point at 50 50 Mixture:
- 129
- 229
- 265
- Pre-Mixed Or Concentrate: 50/50
- Type: Phosphated Hybrid Oat (p-hoat)
- Flash Point:
-
Features:
- Formulated to work with All Vehicles. Works with all fluid colors
- All OAT, POAT, HOAT & IAT.
- Longer Engine Life Guarantee - 10 Yr., 300,000 mile Extended life formula.
- Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
- Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Subaru 360 |
- Autolite 275 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.78
- 19.81
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.025
- 0.64
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.5
- 12.7
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.537
- 13.64
- Resistance: 1
- Insulator Height:
- 2.224
- 56.49
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14 R-7 BU, 14-5 BU, 14-6 BU, 14-7 BU, 14-8 BU, 167-0263-02, 3068, 312, 42-6FS, 42FS, 43FFS, 43FS, 44FFS, 453, 45FFS, 46FFS, 5613099, 5613983...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Subaru 360 | L | 358 | 2 Cyl 0.4L | 22 |
- Autolite 275 Copper Spark Plug
- Gap .025 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Regular
- Core Nose Length:
- 0.78
- 19.81
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Skirt: Yes
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: No
- Indexed: No
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.025
- 0.64
- Ground Electrode Core Material: Nickel
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16
- Reach:
- 0.5
- 12.7
- Center Electrode Tip Material: Nickel
- Skirt Length:
- 0.537
- 13.64
- Resistance: 1
- Insulator Height:
- 2.224
- 56.49
- Center Electrode Insulator Tip Projection:
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Subaru 360 | L | 358 | 2 Cyl 0.4L | 22 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Subaru 360 |
- For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Subaru 360 |
- NGK Standard Spark Plug
- Gap 0.028" Actual OE Manufacturer
- Standard Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.04
- 1.0
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Standard Replacement
- Service Number: B7hs
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: B7hs
- Resistor Type: No
- Stock Number: 5110
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .028
- 0.7
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Non-projected
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.500
- 12.7
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 7
- Ground Configuration: J-gap
- Resistance: 0.0
- Insulator Height:
- 2.16
- 54.8
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- NGK Standard spark plugs (in the iconic NGK 'yellow box' packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
- This item must be purchased in quantities of 10
This Part Fits the Following OEM/Substitute Numbers:
065-01400-41, 065-01400-90, 0650149952, 0801022, 09482-00082, 09482-00153, 13581-6771-6, 150263010, 150265000, 159010-70620, 1765006, 2636, 2653, 2654, 4025, 4092, 4092DP, 4093...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1969 - Subaru 360 | L | 356 | 2 Cyl 0.4L | - |
- Antifreeze/Coolant
- OE #SOA868V9270
- Asian Vehicle Blue Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Blue Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: Hyundai/KIA MS 591-08, Mitsubishi ES-64217, JIS K 2234-1994, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Honda®, Nissan®, KIA®, Hyundai® and others) requiring a blue, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Subaru 360 |
- Power Steering Oil Cooler
- Universal Fit Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8"
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
- Material: Aluminum
-
Features:
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Ultrasonically soldered for reliability
- Compatible with OEM cooler systems
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, 979838, CWK911009
Additional Fitment Information:
| Vehicle |
|---|
| 1969 - Subaru 360 |
Showing 1 - 10 of 12 products
Loading...