Image
Product
Price
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 33.07
- 839.98
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 32.50
- 825.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
0820-18-38199, 1.268.681, 1.276.316-4, 1.706.825, 1063290, 10A0825, 11720-G0300, 13-326, 141-0638, 141-1366, 14853-B8000, 14853-B8001, 15-332, 15325, 15330, 15332, 1562-18-38199, 15W325L...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Fiat X-1/9 | Alternator and Water Pump |
- w/o A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 33.07
- 839.98
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 32.50
- 825.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Fiat 128 | Alternator and Water Pump |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 27.84
- 707
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 27
- 686
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
010288AB, 037145271E, 052903137B, 052903137D, 052903137F, 052903137L, 068121039A, 068121039E, 068903137AQ, 09319, 09319K, 09370, 0950687, 10270, 1061H, 10A0685, 10A0700, 10AV0687...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat X-1/9 | L | 1290 | Air Pump | GAS | 4 Cyl 1.3L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 10.8
- 274
- End 1 Inside Diameter:
- 1.19
- 30
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.19
- 30
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
0002030702, 0588220, 0982656, 09913360, 101681, 101684, 1022789, 1101681, 112, 14-2186-4, 1405560U10, 142-0207, 1565137, 1592, 1657316020, 18-70704, 1B16597H01, 1J0122101CC...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Fiat X-1/9 | L | 1290 | GAS | 4 Cyl 1.3L | - |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.4
- 290
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
001, 047121177, 0516062016, 0516062018, 09914048, 10032771, 108422, 1115010182, 1115010282, 11522415, 1260206, 1276A7, 1336294, 1337395, 14-1781-2, 140551E401, 140552B500, 142-0256...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat Brava | L | 1997 | Upper - Pipe To Radiator | GAS | 4 Cyl 2.0L | 122 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.4
- 290
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat 131 | L | 1756 | Upper - Radiator To Tee | GAS | 4 Cyl 1.8L | - |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1024
- 40.33
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1003
- 39.5
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0029970692, 0049978592, 0059976692, 0059976792, 0069970792, 007026, 0079976692, 0099970392, 027022923, 027022929, 03-02-246-3, 0400213, 042432, 049018544, 06580430121, 0951000, 10395, 10398...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat Brava | L | 1997 | Air Conditioning | GAS | 4 Cyl 2.0L | 122 |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1011
- 39.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 39
- 991
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009840100, 0023245089, 0023255089, 0069970692, 0069972692, 0069973092, 0079972092, 0099970292, 0099975292, 0119300, 0119794, 02018183810, 024918381B, 035145271G, 0403394, 0403397, 05641010300, 069708748...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat 131 | L | 1756 | Air Conditioning | GAS | 4 Cyl 1.8L | - |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
This Part Fits the Following OEM/Substitute Numbers:
1016636, 1040, 1082A64H03, 1118, 114, 1303648, 1602144, 2067002, 21503L1101, 23255, 25253, 31612, 360066, 4324140, 5016, 5017, 517, 52017...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat 128 | L | 1290 | Upper | GAS | 4 Cyl 1.3L | - |
- Flexible Coolant Hose (Standard)
- Product Attributes:
- Molded: No
- Centerline Length:
- 17
- 432
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm, Steel
- End 2 Inside Diameter:
- 1.25
- 32
-
Features:
- Improved sealing surface for greater leak resistance
- High flexibility for easy installation
- Maximum vehicle coverage with minimum inventory
- Resistant to heat, oil and ozone
- Rated for SAE 20R5 Class D-2 performance
- Temperature Range: up to +257 Deg. F (+125 Deg. C)
- Note: Gates recommends replacing clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Vulco-Flex II coolant hose is a flexible, durable hose designed to bend in almost any direction. Engineered with improved sealing surface for greater leak resistance, this hose easily replicates the angles and planes of a wide variety of expensive OE coolant hoses for quick, easy, and cost-effective replacement.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1978 - Fiat 128 | L | 1290 | Lower | GAS | 4 Cyl 1.3L | - |
Showing 1 - 10 of 12 products
Loading...