Image
Product
Price
- Matsushita Comp.
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 34.91
- 886.72
- Rib Depth: Deep
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 34.25
- 869.95
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
11.28.7.546.164, 11.28.7.631.821, 25-040343, 25212-24320, 25212-24350, 342K4, 343K4, 38920-P08-0030, 38920-P75-A01, 38920-PM3-0031, 38920-PM5-A110, 4040342, 4612229, 4K343, 4PK870, 56992-P30-0040, 90082-93002, 99364-20870...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Honda CRX | L | 1588 | Air Conditioning and Idler | 4 Cyl 1.6L | 98 |
- 4PK-900, 905
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 36.16
- 918.47
- Rib Depth: Deep
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 35.50
- 901.70
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
04892749AA, 04892749AB, 0K20A-15-908, 0K2A-15-908, 11920-VW000, 141-1394, 146-040910, 25-040355, 25-74035, 25212-22020, 25212-22030, 355K4, 38920-PH4-6620, 38920-PH4-665, 38920-PH4-A010, 38920-PH4-A010M1, 38920-PH4-A51, 38920-PH4-A520...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Honda Accord | Air Conditioning |
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 39.24
- 996.70
- Rib Depth: Deep
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 38.58
- 979.94
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
04792408AA, 0FB84385, 11920-60U01, 11920-66U00, 141-1304, 141-1317, 146-040980, 146-040985, 1K2AA-15-908, 25-040384, 25-040385, 25-70976, 25212-32510, 25212-32520, 25212-33000, 25212-33050, 385K4, 38920-PR7-A01...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Honda Prelude | Power Steering |
- 4PK-900, 905
This Part Fits the Following OEM/Substitute Numbers:
04892749AA, 04892749AB, 0K20A-15-908, 0K2A-15-908, 11920-VW000, 141-1394, 146-040910, 25-040355, 25-74035, 25212-22020, 25212-22030, 355K4, 38920-PH4-6620, 38920-PH4-665, 38920-PH4-A010, 38920-PH4-A010M1, 38920-PH4-A51, 38920-PH4-A520...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Honda Accord | Air Conditioning |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Honda CRX | L | 1588 | 4 Cyl 1.6L | 98 |
- Timing Belt Driven, Replace Timing Belt w/Pump w/19 Tooth Pulley
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Honda Civic | L | 1493 | 4 Cyl 1.5L | - |
- 12in. Tornado Electric Puller Fan; Standard Mounting Kit
- 880 CFM; 12 in. Fan Size; 12-3/8 in. Width; 11-1/4 in. x 5-1/4 in. Mounting; 11-13/16 in. Height; 1-1/4 in. Depth; 8.8 Amp Draw
- 12in. Tornado Electric Fan; Standard Kit
- Tornado Electric Puller Fan
- Product Attributes:
- Diameter (in.): 12.000 In.
-
Features:
- Reliable/Efficient/High Torque Motors
- 880 CFM
- Reversible Design/Can Be Used As Pusher Or Puller
- Includes Nylon Mounting Kit
- This 12 in. reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Honda Prelude |
- High Amperage Adjustable Dual Electric Fan Controller; 3/8in. NPT Thread In Prob
- High Amperage; Adjustable; w/3/8 in. NPT Thread In Probe; 35 Amp Per Fan; 2-3/8 in. Width; 4-5/8 in. Length; 1-9/16 in. Height; Dual
- Hi-Amp Adjst. Dual Fan Control (3/8in. NPT)
- Electric Fan Controller
-
Features:
- Adjustable Turn-On Temperature From 160 To 240 Degrees Fahrenheit
- Rated At Maximum 35 Amps Per Fan
- Activates Fan 1 At Adjusted Temperature
- Activates Fan 2 At 10 Degrees Fahrenheit Warmer Than Fan 1
- 15 Degrees Lower Turn-Off Temperature Than Turn-On Temperature
- Die Cast Aluminum Housing
- Includes AC Override Circuit
- Thread-In 3/8 in. NPT Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8 in. NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1988 - Honda Civic | SE |
- 4 Pass 17in. Series 7000 Copper/Aluminum Transmission Cooler Kit
- Copper Tube And Aluminum Fin; 16-5/8 in. Width; 5-1/8 in. Height; 3/4 in. Depth; 11/32 in. Hose Size; 4 ft. Hose Length
- Transmission Cooler; Compact (Carton)
- Series 7000 Transmission Cooler Kit
- Product Attributes:
- Gross Vehicle Weight: 14000 Lbs.
-
Features:
- Prevents Heat Related Transmission Failures
- Extends Life Of Transmission
- Improves Transmission Performance
- Extruded Plastic Cooling Fin Guards
- 4 Pass Cooler Design
- 1/2 in. Copper Tubing Expanded Into Aluminum Cooling Fins
- 11/32 in. Hose Barb Inlets
- Rated At 14000 GVW
- Includes Complete Hardware Kit
- This Tube & Fin transmission cooler features 1/2 in. copper tubing expanded into aluminum cooling fins and include embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for today's highly-stressed compact cars and SUVs', they improve shifting performance and extend the life of the transmission by eliminating heat-related transmission failures. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 1988 - Honda Civic | LX |
- Blower Motor Module Connector
- Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm.
- Connector Gender: Female
- Terminal Type: Blade
- Connector Shape: Rectangular
- Terminal Gender: Female
- Terminal Quantity: 4
- Wire Quantity: 4
- Offering hundreds of high-quality pigtails & sockets for nearly every electrical job. Utilizing high grade materials to ensure peak conductivity and perfect connections. Decades of industry leading research and development focused on meeting the technician's needs. With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1157, 1170, 1P1388, 1P1789, 1P1802, 37257, 57-5167, 57-5570, 57-5583, 5U2Z14S411RA, 645-701, 645-714, 88987868, EC1016, PT1017, PT1708, PTC1099, WPT858...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Honda Civic |
Showing 1 - 10 of 162 products
Loading...