Image
Product
Price
- Submodel: Legacy
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 33.93
- 861.83
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 33.27
- 845.06
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Subaru Outback | H | 2458 | Air Conditioning and Idler | 4 Cyl 2.5L | - |
- Product Attributes:
- Cross Section: K-section
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 33.93
- 861.83
- Rib Depth: Standard
- Standards: Sae J1459, Sae J2432
- Effective Length:
- 33.27
- 845.06
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
This Part Fits the Following OEM/Substitute Numbers:
0K2FT-15-908, 11 28 7 512 563, 11 2837 512 563, 11.28.7.559.454, 11720-J8001, 11920-J9300, 11920-V7301, 11920-V7302, 11920-V7311, 11950-05600, 11950-4Z800, 11950-53J10, 11950-53J20, 11950-5M001, 11950-Q5600, 11950-V7301, 11950-V7302, 141-1334...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2008 - Subaru Legacy | H | 2458 | Air Conditioning and Idler | 4 Cyl 2.5L | - |
- Radiator cap
- Relief pressure 16 lb
- Standard
- Product Attributes:
- Cap Depth: 0.97
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Subaru Forester | H | 2458 | 4 Cyl 2.5L | - |
- Cut to Fit Optional Replacement
- Small I.D. Heater Hose
- Product Attributes:
- Trunk Height: 5 1/2
- End 2 Outside Diameter: 15/16
- Contains Heat Shield: N
- End 1 Inside Diameter: 5/8
- End 1 Outside Diameter: 15/16
- Hose Type: Single I.d. Hose
- SAE Specification: Sae J20r3 Class D-1, Sae J1684 Type Ec
- Contains Protective Sleeve: N
- End 2 Inside Diameter: 5/8
This Part Fits the Following OEM/Substitute Numbers:
10044, 10761, 11535, 14093S, 14518S, 14566S, 18044, 18761, 19535, 79722-SZA-A00, 79722-TK8-A00, 807615081, B87842
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 2008 - Subaru Forester | Naturally Aspirated |
- 08-14 Subaru WRX / STI / 15-21 Subaru WRX 1-Row 31mm High-Performance Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your WRX/STI. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Core Material: Aluminum
- Title: 08-14 Subaru Wrx / Sti / 15-21 Subaru Wrx 1-row 31mm High-performance Radiator
-
Features:
- High-Performance Core Features CSF's Exclusive B-Tube Technology
- Supersedes CSF #7028
- Core Featured Ultra Efficient 6.5mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- 100% All-Aluminum TIG-Welded Construction
- CNC Machined Mounting Brackets
- Innovative "Multi-Fit" Combo Pipe and Plug Design, Included
- True "Drop-in Fit" Requires No Modifications to Install
- Individually Leak and Pressure Tested
- 1 Hour "Mirror Finish" Hand Polish
- For Manual Transmission Only
- CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your WRX/STI running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.The CSF WRX/STI radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
45111AG01A, 45111AG09A, 45119AG010, 45119FG010, 45119FG030, 45119SC010, 45119SC090, 45119VA000, 45119VA010
Additional Fitment Information:
| Vehicle | Transmission | Region | Sub Model |
|---|---|---|---|
| 2008 - Subaru Outback | Manual | United States | 2.5i |
- 08-14 Subaru WRX / STI / 15-21 Subaru WRX 2-Row 42mm Race-Spec Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your WRX/STI. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Core Material: Aluminum
- Title: 08-14 Subaru Wrx / Sti / 15-21 Subaru Wrx 2-row 42mm Race-spec Radiator
-
Features:
- High-Performance Core Features CSF's Exclusive B-Tube Technology
- Supersedes CSF #7042
- Core Featured Ultra Efficient 6.5mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
- 100% All-Aluminum TIG-Welded Construction
- CNC Machined Mounting Brackets
- Innovative "Multi-Fit" Combo Pipe and Plug Design, Included
- True "Drop-in Fit" Requires No Modifications to Install
- Individually Leak and Pressure Tested
- 1 Hour "Mirror Finish" Hand Polish
- For Manual Transmission Only
- CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your WRX/STI running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.The CSF WRX/STI radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
45111AG01A, 45111AG09A, 45119AG010, 45119FG030, 45119SC010, 45119SC090, 45119VA000, 45119VA010
Additional Fitment Information:
| Vehicle | Transmission | Region | Sub Model |
|---|---|---|---|
| 2008 - Subaru Legacy | Manual | United States | GT spec.B |
- 08-14 Subaru WRX & STI with built-in Oil Cooler All-Aluminum Radiator
- CSF manufactures the most advanced and efficient radiator in the industry for your WRX/STI. CSF uses innovative tube and fin technologies with industry-leading testing methods to maximize airflow and heat dissipation.
- Product Attributes:
- Core Material: Aluminum
- Title: 08-14 Subaru Wrx & Sti W/ Built-in Oil Cooler All-aluminum Radiator
-
Features:
- 2-Row 42mm Core (Dual Core) Featuring CSF's Exclusive B-Tube Technology
- Core Features an Ultra-Efficient Fin with 6.5mm Fin Height and Multi-Louvered Design for Maximum Surface Area Contact
- CNC Machined "Quick-Connect" Inlet/Outlet Connections
- CNC Machined Brackets and Fittings for Superb Fit and Durability
- All-Aluminum Race Style Drain Plug
- 1-Hour "Mirror Finish" Hand Polish
- Drop-in Fit
- CSF has over 5 decades of experience manufacturing radiators. So when it comes to keeping your engine cool and your WRX/STI running at its best, a CSF High-Performance All-Aluminum Radiator is the obvious choice. Designed to perform on the street or at the track, a performance radiator is a must-have for both high horsepower builds as well as race vehicles which need added cooling performance in motorsports environments. This radiator features a 2-Row core with CSF's exclusive B-Tube Technology: Unlike a regular oval shape "O" type radiator tube, CSF uses a specially engineered tube in the shape of a "B". These "B-tubes" are carefully formed and then brazed over the seam to seal. CSF is able to use thinner and lighter aluminum material (with better cooling efficiency) because this design is actually stronger than normal "O" shape tubes that are welded. The design (inlet in the middle of the tube that is seam brazed) increases the heat transfer surface area of the tubes by approximately 15% over regular tubes - producing the efficiency of two smaller tubes vs. one large tube within the same space criteria. With "B-tubes" you are able to get "dual liquid laminar flow". CSF also uses ultra efficient multi louvered fins that are carefully and precisely aligned to maximize airflow through each radiator core. Fin specifications are carefully measured and calculated for each application, and tested for maximum heat rejection efficiency in our wind-tunnel lab.The CSF WRX/STI radiator is a true "Drop-in fit" design requiring no modifications to install. OE style brackets are all CNC machined and welded for the best durability possible. Inlet/Outlet connections are designed to match the OE connections so you can reuse OEM hoses or aftermarket. Trust the cooling experts at CSF for the best performing, highest-quality, and most reliable radiators.
This Part Fits the Following OEM/Substitute Numbers:
45111AG01A, 45111AG09A, 45119AG010, 45119FG030, 45119SC010, 45119SC090, 45119VA000, 45119VA010
Additional Fitment Information:
| Vehicle | Transmission | Region | Sub Model |
|---|---|---|---|
| 2008 - Subaru Legacy | Manual | Canada | GT |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Subaru Legacy | H | 3000 | 6 Cyl 3.0L | - |
- Radiator cap
- Relief pressure 13 lb
- Standard
- Product Attributes:
- Valve OD: 0.98 In
- Cap Depth: 0.85
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10241, 10241ST, 11241, 12R18, 1640120353, 1640136030, 1640172090, 1678-44403, 17036, 18241, 19204980, 28241, 31411, 45137XA01B, 70241BL, 70241RD, 703-1728, 7036...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Subaru Tribeca | H | 3630 | 6 Cyl 3.6L | - |
- O-Ring
- Use: Water Outlet Water outlet
- FEL-PRO 35524 O-Ring
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
112251, 21236-AA000, 21236-AA010, 21236AA050, 33661, 74-0204, C31197, C31748, C31766, MD158570, MD170031, MD175746, MD31-4596, MD315301, MD337408, MD36-5878, WO8343, WO8383...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Subaru Outback | H | 2458 | 4 Cyl 2.5L | - |
Showing 1 - 10 of 254 products
Loading...