Image
Product
Price
- Premium OE Stretch Fit Micro-V Belt
- Product Attributes:
- Top Width:
- .56
- 14
- Outside Circumference:
- 36
- 916
- Instruction Manual Included: Sheet A
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
- 35.51
- 902
- Rib Quantity: 4
- Cord Material: Nylon
- Installation Tools Requirements: Special Installation Tool
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
12603509, 12624100, 19178068, 19210691, 19210961, 2249471, 25-040355SF, 4040355S, 4K355SF, 4PK939 (STRETCH FIT), 8126241000, 8192106910, E040357, EB009, JX6E 6C301 BA, JX6Z 8620 E, K040355SF
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2014 - Fiat Ducato | L | 2287 | Air Conditioning | DIESEL | 4 Cyl 2.3L | 140 |
- Molded Coolant Hose
- Product Attributes:
- Modular Components: Branch, Female Quick Connector
- End 3 Inside Diameter: .7
- Centerline Length:
- 16.5
- 18
- 419
- End 1 Inside Diameter:
- 1.15
- 29
- End 2 Inside Diameter:
- 1.6
- 41
This Part Fits the Following OEM/Substitute Numbers:
27864X, 51604, 52014688AC, CHR0485
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|---|
| 2014 - Fiat 500L | L | 1368 | Lower | GAS | 4 Cyl 1.4L | Turbocharged | 83 |
- Tension Clamp; 23mm x 15mm Heater Core Hose
- Hose Clamp; Tension Clamp; 23mm x 15mm;
- Hose Clamp
- Product Attributes:
- Size: 23mm X 15mm
-
Features:
- Hose Clamp
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Fiat 500 |
- Also Engine Oil Temperature Sensor For Various Jeeps
- Coolant Temperature Sensor; Also Engine Oil Temperature Sensor For Various Jeeps;
- Coolant Temperature Sensor
-
Features:
- Coolant Temperature Sensor
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2014 - Fiat 500 | - | - | - Cyl -L | E | - |
- Adjustable Electric Fan Controller, Push In Radiator Probe
- 2 Required
- Adjustable Electric Fan Controller, Push In Radiator Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Trigger: Ground Circuit
-
Features:
- Adjustable Electric Fan Controller, Push In Radiator Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a push-in radiator probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Fiat 500L | L | 1368 | 4 Cyl 1.4L | 83 |
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- Econo Control
- Product Attributes:
- Max Amp Draw: 25
- Switching activation: Ground
-
Features:
- Adjustable Electric Fan Controller, 3/8" NPT Thread In Probe
- This newly redesigned adjustable electric fan control kit is designed to activate up to 2 fans with a total maximum draw of 25 amps. Includes a water jacket 3/8" NPT thread-in probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included. Adjustable fan controller turn-on range from 150°F - 240°F, and turn-off preset at 10°F lower than turn-on.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Fiat 500L | L | 1368 | 4 Cyl 1.4L | 83 |
- 12" Tornado Electric Puller Fan, Standard Mounting Kit
- 2 Required
- 12" Tornado Electric Puller Fan, Standard Mounting Kit
- Standard duty
- Product Attributes:
- Airflow: Puller (reversible)
- Width: 12-3/8
- CFM: 880
- Height: 11-13/16
- Mounting: 11-1/4 X 5-1/4
- Depth: 1-1/4
-
Features:
- 12" Tornado Electric Puller Fan, Standard Mounting Kit
- This 12" reversible Tornado fan uses 8 skewed blades, producing 880 CFM at 0 static pressure, drawing only 8.8 amps. Take two of these fans and one of our 16701 Dual fan mounting brackets and you have a powerful dual fan combo in a compact package. Includes mounting kit and illustrated installation instructions.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Fiat 500L | L | 1368 | 4 Cyl 1.4L | 83 |
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- Push In Sensor Probe
- Product Attributes:
- Max Amp Draw: 25
-
Features:
- Premium Single Stage 180°F Fan Controller with Push In Probe, 25 Amp
- This 180°F-on/165°F-off electric fan control kit is designed to activate up to 2 fans with a maximum draw of 25 amps. Includes a push-in radiator fin probe, relay wire harness and electrical connectors for an easy installation. A/C override circuit included.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Fiat 500L | L | 1368 | 4 Cyl 1.4L | 83 |
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- 2 Required
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Better Control
- Product Attributes:
- Amp Rating: 35 Amp Per Fan
- Length: 4-5/8
- Width: 2-3/8
- Height: 1-9/16
-
Features:
- High Amperage Adjustable Dual Electric Fan Controller, 3/8" NPT Thread In Probe
- Designed with quality and performance in mind, this High Amperage Dual Fan Controller breaks new ground in the industry of electric fan controllers. 100% USA made, a bulletproof design, 35 amp per fan amperage rating, adjustability from 150°-240°F, and a die cast bright finish aluminum cap, come together to make this dual fan controller stand out from the crowd. It's capable of controlling two separate 35 amp fans at different turn-on temperatures, with only a single probe. The first electric fan will be activated at the temperature set by the user followed by the second electric fan when the temperature becomes 10°F warmer. Each electric fan will turn off at 10°F below its turn-on temperature. Kit comes complete with wiring harness, fusible link, all necessary electrical connectors and 3/8" NPT thread-in probe.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Fiat 500L | L | 1368 | 4 Cyl 1.4L | 83 |
- Radiator cap
- Relief pressure 22 lb
- Standard
- Product Attributes:
- Valve OD: 1.54 In
- Cap Depth: 1.18
- Filler Neck Outside Diameter: 2.13
- Lever Type: Standard
- Coolant Recovery System: Open & Closed System
- Filler Neck Height: 0.75
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10372, 10392, 17022, 31557, 31559, 380178, 5183710AA, 7022, 9T22, P7022, T22
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Fiat 500 | L | 1368 | 4 Cyl 1.4L | 83 |
Showing 1 - 10 of 50 products
Loading...