2017 BMW Belts and Cooling Parts
Choose a Model for your 2017 BMW
230i
230i xDrive
320i
320i xDrive
328d
328d xDrive
330e
330i
330i GT xDrive
330i xDrive
340i
340i GT xDrive
340i xDrive
430i
430i Gran Coupe
430i xDrive
430i xDrive Gran Coupe
440i
440i Gran Coupe
440i xDrive
440i xDrive Gran Coupe
530i
530i xDrive
535i GT
535i GT xDrive
540i
540i xDrive
550i GT xDrive
640i
640i Gran Coupe
640i xDrive
640i xDrive Gran Coupe
650i
650i Gran Coupe
650i xDrive
650i xDrive Gran Coupe
740Le xDrive
740e xDrive
740i
740i xDrive
750Li xDrive
750i
750i xDrive
Alpina B6 xDrive Gran Coupe
Alpina B7
M2
M240i
M240i xDrive
M3
M4
M6
M6 Gran Coupe
M760Li xDrive
M760i xDrive
X1
X3
X4
X5
X6
i3
i8
Image
Product
Price
- Elastic Self-Tensioning Belt Installation Tool Not Required, Refer to Maintenance Manual for Installation.
- Supersedes E040302
- Product Attributes:
- Cross Section: K-section
- Free Length:
- 30.2
- 767.080
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference: 0
- Rib Depth: Standard
- Standards: Sae J1459
- Effective Length: 0
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - BMW M6 Gran Coupe | Air Conditioning |
- Elastic Self-Tensioning Belt Installation Tool Not Required, Refer to Maintenance Manual for Installation.
- Supersedes E040309
- Product Attributes:
- Cross Section: K-section
- Free Length:
- 30.9
- 784.860
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference: 0
- Rib Depth: Standard
- Standards: Sae J1459
- Effective Length: 0
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - BMW 650i Gran Coupe | Air Conditioning |
- Elastic Self-Tensioning Belt
- Supersedes E040262
- Product Attributes:
- Cross Section: K-section
- Free Length:
- 26.2
- 665.480
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference:
- 27.416
- 696.37
- Rib Depth: Standard
- Standards: Sae J1459
- Effective Length:
- 26.85
- 681.99
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - BMW M4 | Water Pump |
- Elastic Self-Tensioning Belt
- Supersedes E040309
- Product Attributes:
- Cross Section: K-section
- Free Length:
- 30.9
- 784.860
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference: 0
- Rib Depth: Standard
- Standards: Sae J1459
- Effective Length: 0
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - BMW Alpina B7 | Air Conditioning |
- Elastic Self-Tensioning Belt Installation Tool Not Required, Refer to Maintenance Manual for Installation.
- Supersedes E040309
- Product Attributes:
- Cross Section: K-section
- Free Length:
- 30.9
- 784.860
- Top Width: .54
- Rib Profile: Straight Rib
- Outside Circumference: 0
- Rib Depth: Standard
- Standards: Sae J1459
- Effective Length: 0
- Minimum Operating Temperature:
- -42.7
- -45
- 381: 4
- Maximum Operating Temperature:
- 100
- 212
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - BMW 750i xDrive | Air Conditioning |
- 13 Row Series 9000 Plate/Fin Transmission Cooler Kit; 1/2in. NPT
- Plate And Fin Style; Aluminum; 10-1/8 in. in. Width; 6-3/4 in. x 8 in. Mounting; 8-7/8 in. Height; 1-1/4 in. Depth
- Plate/Fin Transmission Cooler Kit (1/2in. NPT)
- Series 9000 Transmission Cooler Kit
- Product Attributes:
- Gross Vehicle Weight: 20500 Lbs.
-
Features:
- Prevents Heat Related Transmission Failures
- Extends Life Of Transmission
- Improves Transmission Performance
- Sturdy Furnace Brazed Aluminum Construction
- 13 Row Cooler Design
- 1-1/4 in. Turbulators Maximize Cooling
- 1/2 in. NPT Female Cooler Fittings
- Includes 1/2 in. NPT x 3/8 in. Hose Barb Adapters
- Rated At 20500 GVW
- 10 Ounces Fluid Capacity
- Rated At 250 PSI Working Pressure/300 PSI Burst Strength
- Very popular with original equipment manufacturers for use on their towing applications, our Plate and Fin coolers is no exception, featuring strong furnace-brazed construction, 1 1/4 in. wide plates and embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for light to medium duty use and occasional towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. Built with 1/2 in. NPT female cooler ports and includes 1/2 in. NPT x 3/8 in. hose barb adapters. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - BMW 750i |
- 13 Row Series 8000 Plate/Fin Transmission Cooler Kit; 11/32in.
- Plate And Fin Style; Aluminum; 11 in. Width; 6-3/4 in. x 6-1/8 in. Mounting; 7-1/4 in. Height; 7/8 in. Depth
- Plate/Fin Transmission Cooler Kit (11/32in.)
- Series 8000 Transmission Cooler Kit
- Product Attributes:
- Gross Vehicle Weight: 17500 Lbs.
-
Features:
- Embossed Turbulators Inserted In Each Tube Agitate Fluid
- Extruded Plastic Cooling Fin Guards
- Improves Transmission Performance
- Sturdy Furnace Brazed Aluminum Construction
- 13 Row Cooler Design
- 3/4 in. Embossed Turbulators Maximize Cooling
- 11/32 in. Hose Barb Inlets
- Rated At 17500 GVW
- Includes Complete Hardware Kit
- 4 Ounces Fluid Capacity
- A step up from Tube & Fin type coolers, this Plate and Fin cooler features strong furnace-brazed construction, 7/8 in. wide plates, 3/4 in. embossed turbulators which maximize heat transfer while also minimizing pressure drop. This unit is perfect for light to medium duty use and occasional towing. It greatly extends transmission life by preventing heat-related transmission failures, and improve shifting performance. This kit comes with a complete transmission cooler hardware kit to easily install onto vehicles with 5/16 in. transmission cooler lines.
Additional Fitment Information:
| Vehicle |
|---|
| 2017 - BMW 328d xDrive |
- DCT Transmission Cooler, fits BMW F8X M3/M4 2015-2020
- DCT Transmission Cooler, fits BMW F8X M3/M4 2015-2020
- Product Attributes:
- SellingPoint04: Internal Fins Incorporated For Additional Cooling Power
- SellingPoint05: Core Features A Dual-pass Design For Optimal Cooling
- SellingPoint06: Includes Specially Designed Spacer For Perfect Fitment
- TechSpec Overall Length (in): 25.9
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Direct Fit For The Dct Equipped Bmw M3/m4
- SellingPoint02: 42-percent Increase In Core Volume
- SellingPoint03: 69-percent Increase In External Fin Surface Area
- TechSpec Chassis Codes: F80--f82--f83--f87
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 3.97
- TechSpec Core Thickness (in): 1.25
- SellingPoint10: N/a
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: S55
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 21.25
- TechSpec Overall Height (in): 3.97
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: N/a
- TechSpec Applications: 2015-2018 Bmw M3 Sedan--2015-2020 Bmw M4 Coupe--2015-2020 Bmw M4 Convertible--2016 Bmw M4 Gts Coupe--2019-2020 Bmw M4 Cs Coupe--2019-2020 Bmw M2 Competition
- TechSpec Includes: Transmission Cooler--application-specific Spacer--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: N/a
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): 7.4
-
Features:
- Direct fit for the DCT equipped BMW M3/M4
- 42% increase in core volume
- 69% increase in external fin surface area
- Internal fins incorporated for additional cooling power
- Core features a dual-pass design for optimal cooling
- Includes specially designed spacer for perfect fitment
- Mishimoto Lifetime Warranty
- Keep your gears cool with the Mishimoto 2015-2020 BMW DCT Transmission Cooler. The F80 platform is one that demands peak performance, and the dual-clutch transmission equipped on your M2 Competition, M3, or M4 provides you with lightning-fast precision gear changes putting you in a league above the rest. Extreme heat being applied to your transmission, however, can easily knock your M down a few pegs. Our transmission cooler aims to provide your M with the cooling to keep up on the street and track. We started from the ground up for our DCT cooler design, equipping it with a new 1.25" thick core resulting in a 42-percent increase in core volume and 69-percent bump in external fin surface area. The improvements are more than just skin deep too, as we updated this core with a dual-pass flow and internal fins for improved heat transfer. Combined, our upgraded features improve the heat rejection characteristics for better heat regulation of the DCT in your M2 Competition, M3, or M4. The Mishimoto 2015-2020 BMW DCT Transmission Cooler is available in a silver powder coat finish and is covered by the Mishimoto Lifetime warranty for a worry-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2017 - BMW M4 | L | 2979 | GAS | 6 Cyl 3.0L | - |
- BMW F8X M3/M4 Performance Oil Cooler, 2015-2020
- Oil Cooler, fits BMW F8X M3/M4 2015-2020
- Product Attributes:
- SellingPoint04: Increases Oil Capacity By .44 Quarts
- SellingPoint05: Robust Bar-and-plate Construction For Improved Durability And Heat Rejection
- SellingPoint06: Silver Powder-coated Finish For Maximum Protection
- TechSpec Overall Length (in): 29.2
- SellingPoint07: No Cutting Or Modifications Required
- SellingPoint01: Direct Fit For The 2015-2020 Bmw F8x M3, M4, And M2 Competition
- SellingPoint02: Full Aluminum Tig-welded Construction
- SellingPoint03: 46-percent Increase In Core Volume
- TechSpec Chassis Codes: F80--f82--f83--f87
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- SellingPoint10: N/a
- TechSpec Note: Fits X3/x4 M Only.
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: S55
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): 7
- TechSpec Fluid Capacity (qts): 1.13
- TechSpec Caution: N/a
- TechSpec Applications: 2015-2018 Bmw M3 Sedan--2015-2020 Bmw M4 Coupe--2015-2020 Bmw M4 Convertible--2016 Bmw M4 Gts Coupe--2019-2020 Bmw M4 Cs Coupe--2019-2020 Bmw M2 Competition--2020 Bmw X3 M--2021 Bmw X3 M--2022 Bmw X3 M--2020 Bmw X4 M--2021 Bmw X4 M
- TechSpec Includes: Performance Oil Cooler--replacement O-rings--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 15
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): 1.6
-
Features:
- Direct fit for the 2015-2020 BMW F8X M3 and M4
- Full aluminum TIG-welded bar-and-plate construction
- 46-percent increase in core volume
- Increases oil capacity by .44 quarts
- Mishimoto Lifetime Warranty
- Add some much needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler. True to form, the engineers at BMW designed the M3/M4's oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where It'should be. We also added 10mm to the core?s thickness, equating in a 46-percent increase in core volume and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2017 - BMW M4 | Base |
- BMW F8X M3/M4 Performance Oil Cooler, 2015-2020
- Oil Cooler, fits BMW F8X M3/M4 2015-2020
- Product Attributes:
- SellingPoint04: Increases Oil Capacity By .44 Quarts
- SellingPoint05: Robust Bar-and-plate Construction For Improved Durability And Heat Rejection
- SellingPoint06: Silver Powder-coated Finish For Maximum Protection
- TechSpec Overall Length (in): 29.2
- SellingPoint07: No Cutting Or Modifications Required
- SellingPoint01: Direct Fit For The 2015-2020 Bmw F8x M3, M4, And M2 Competition
- SellingPoint02: Full Aluminum Tig-welded Construction
- SellingPoint03: 46-percent Increase In Core Volume
- TechSpec Chassis Codes: F80--f82--f83--f87
- SellingPoint08: Mishimoto Lifetime Warranty
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): N/a
- TechSpec Core Thickness (in): N/a
- Installation Difficulty: 2
- SellingPoint10: N/a
- TechSpec Note: Fits X3/x4 M Only.
- TechSpec Installation Notes: N/a
- Prop 65 (C, R or CR): Cr
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: S55
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): N/a
- TechSpec Overall Height (in): 7
- Prop 65 - Short Label: Prop65_warning.jpg
- TechSpec Fluid Capacity (qts): 1.13
- TechSpec Caution: N/a
- TechSpec Applications: 2015-2018 Bmw M3 Sedan--2015-2020 Bmw M4 Coupe--2015-2020 Bmw M4 Convertible--2016 Bmw M4 Gts Coupe--2019-2020 Bmw M4 Cs Coupe--2019-2020 Bmw M2 Competition--2020 Bmw X3 M--2021 Bmw X3 M--2022 Bmw X3 M--2020 Bmw X4 M--2021 Bmw X4 M
- TechSpec Includes: Performance Oil Cooler--replacement O-rings--mounting Hardware--mishimoto Lifetime Warranty
- TechSpec Rows: 15
- TechSpec Inlet: N/a
- TechSpec Core Construction: N/a
- TechSpec Overall Width (in): 1.6
-
Features:
- Direct fit for the 2015-2020 BMW F8X M3 and M4
- Full aluminum TIG-welded bar-and-plate construction
- 46-percent increase in core volume
- Increases oil capacity by .44 quarts
- Mishimoto Lifetime Warranty
- Add some much needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler. True to form, the engineers at BMW designed the M3/M4's oil cooler with an efficient use of space in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the light weight, tube-and-fin cooler in harms way of road hazards. We here at Mishimoto made sure to beef up the oil cooler design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down, and where It'should be. We also added 10mm to the core?s thickness, equating in a 46-percent increase in core volume and increased the oil capacity by .4 qt. The Mishimoto 2015-2020 BMW M3/M4 Performance Oil Cooler fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2017 - BMW M4 | L | 2979 | GAS | 6 Cyl 3.0L | - |
Showing 1 - 10 of 530 products
Loading...