1971 Chevrolet Body Parts
Choose a Model for your 1971 Chevrolet
Image
Product
Price
- 0.125 Aluminum Brite-Tread Uncoated; Volume 80 Gallons; L 48 in. x W 29 in. x H 24 in.; L-Shaped/Narrow Base
- Specialty Series Auxiliary Transfer Tank; 0.125 Aluminum Brite-Tread Uncoated; Volume 80 Gallons; L 48 in. x W 29 in. x H 24 in.; L-Shaped/Narrow Base;
- Specialty Series Auxiliary Transfer Tank
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Gallon Capacity: 80
-
Features:
- Non-Rusting Brite-Tread Aluminum
- Protective Black Powder-Coat Finish
- Radius Curve Eliminates Weld Pressure Points
- 3 Stability Baffles And Drain Plug
- Cap And Coupler For Venting Included
- Mounting Tabs To Secure To Truck Bed
- Made In USA
- Limited Lifetime Warranty
- Dee Zee Auxiliary Tanks - A safe and convenient means for transporting non-flammable liquids. Auxiliary tank can be connected to gravity flow kit to syphon fuel directly into your vehicles diesel gas tank (sold separately). Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature stability baffles, lockable cap, 3/8 in. drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Hydrostatically pressure tested to meet Federal Motor Carrier Safety Administration requirements for auxiliary tanks. Meets Federal DOT requirements for UN31B tanks. Connector kits to feed diesel directly into your fuel line sold separately (DZ97960 & DZ97961).
Additional Fitment Information:
| Vehicle |
|---|
| 1971 - Chevrolet K30 Pickup |
- Volume 6.2 cu. ft.; L 70.5 in. x W 14.75 in. x H 14.37 in.; Plastic
- Specialty Series Poly Crossover Tool Box; Volume 6.2 cu. ft.; L 70.5 in. x W 14.75 in. x H 14.37 in.; Plastic;
- Specialty Series Poly Crossover Tool Box
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Style: Cross Over Rail Standard Profile
- Opening Type: Single Lid
-
Features:
- Constructed Of Strong Yet Lightweight Plastic
- Sliding Hook Style Latching System For Tight Seal
- Lockable Lid
- Closed Cell Foam Gasket
- Dee Zee Tool Box – Plastic Crossover Tool Box. Constructed of strong yet lightweight plastic. Sliding hook style latching system for a tight seal. Lockable lid. Available for fullsize and midsize trucks. Closed cell foam gasket.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 1971 - Chevrolet C10 Pickup | Fleetside |
- 0.056 Brite-Tread Aluminum; Volume 8 cu. ft.; L 69.75 in. x W 20 in. x H 16.25 in.; Low Profile
- Red Label Single Lid Crossover Tool Box; 0.056 Brite-Tread Aluminum; Volume 8 cu. ft.; L 69.75 in. x W 20 in. x H 16.25 in.; Low Profile;
- Red Label Single Lid Crossover Tool Box
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Style: Cross Over Rail Standard Profile
- Opening Type: Single Lid
-
Features:
- Non-Rusting Brite-Tread Aluminum
- Protective Gloss Black Powder coat Finish
- Lockable Stainless Steel Paddle Handles
- Internal Bends Add Superior Body Strength
- Closed Cell Foal Gasket Helps Resist The Elements
- Dampened Gas Shocks Open At A Steady Controlled Rate
- Crowned Lid w/Full Length Hidden Hinge
- Double V Pan Lid Stiffener Creates Strength And Rigidity
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- Made In USA
- Dee Zee Tool Box - Red Label Single Lid Crossover. Constructed of heavy duty Brite-Tread aluminum with low profile design. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 1971 - Chevrolet C20 Pickup | Fleetside |
- Flexy Flare Rubber Fender Exten. X-Wide No Lip Side Mount, 4-1/4"x25' Bulk Roll
- Flexy Flare Rubber Fender Exten. X-Wide No Lip Side Mount, 4-1/4"x25' Bulk Roll
- 4 1/4" No-Lip Side Mount Extra-Wide 25' Bulk Roll
- Product Attributes:
- Width EA: 4.25
- Length EA: 25
- Height EA: 2 1/2
-
Features:
- Flexable UV Resistant PVC Rubber
- includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle |
|---|
| 1971 - Chevrolet El Camino |
- 0.090 Black-Tread Aluminum; Volume 11.7 cu. ft.; L 69.75 in. x W 20 in. x H 18.25 in.; Low Profile
- Red Label Single Lid Crossover Tool Box; 0.090 Black-Tread Aluminum; Volume 11.7 cu. ft.; L 69.75 in. x W 20 in. x H 18.25 in.; Low Profile;
- Red Label Single Lid Crossover Tool Box
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Style: Cross Over Rail Standard Profile
- Opening Type: Single Lid
-
Features:
- Heavy Duty Brite-Tread Aluminum
- Textured Black Powder Coat
- Matte Black Finish
- Crown Style Lid For Superior Rigidity
- Lockable Stainless Steel Paddle Handles
- Dampened Gas Shocks
- Closed Cell Foam Gasket
- Self-Adjusting Strikers
- Removable Plastic Tool Tray To Keep Smaller Items Organized
- Dee Zee Tool Box - Red Label Single Lid Crossover. Constructed of heavy duty Brite-Tread aluminum with low profile design. Extra deep bottom for maximum storage capacity. Black-Tread powder coat, provides a gloss black finish while it protects and prevents oxidation. Crown style lid with a full pan double-V stiffener for superior rigidity. Other features: lockable stainless steel paddle handles, dampened gas shocks, closed cell foam gasket, and self-adjusting strikers. Removable plastic tool tray to help keep small items organized.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 1971 - Chevrolet K30 Pickup | Fleetside |
- Volume 40 Gallons; L 56 in. x W 9.625 in. x H 19 in.; Narrow Rectangle Shape; Brite-Tread Aluminum
- Auxiliary Liquid Transfer Tank; Volume 40 Gallons; L 56 in. x W 9.625 in. x H 19 in.; Narrow Rectangle Shape; Brite-Tread Aluminum;
- Auxiliary Liquid Transfer Tank
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: State Of California Consumers - Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
- Gallon Capacity: 40
-
Features:
- Constructed Of Heavy Duty Brite-Tread Aluminum
- Radius Curve Eliminates Weld Pressure Points
- 3 Stability Baffles And Drain Plug
- Lockable Cap
- 3/8 in. Drainage Plug and Venting Coupler
- Dee Zee Transfer Tanks - A safe and convenient means for transporting non-flammable liquids. Constructed of heavy gauge Brite-Tread aluminum. Radius curve design eliminates key weld pressure points. Tanks feature stability baffles, lockable cap, 3/8 in. drainage plug, and venting coupler. Tanks are intended for private use (non-commercial). Not designed for use as an auxiliary fuel system. Not for use with gasoline. Does not meet title 49 of the United Stated Federal Registry governing transportation.
Additional Fitment Information:
| Vehicle |
|---|
| 1971 - Chevrolet C20 Pickup |
- Flexy Flare Rubber Fender Extensions Heavy Duty, 2-1/2" x 58", 4 Piece Kit
- Flexy Flare Rubber Fender Extensions Heavy Duty, 2-1/2" x 58", 4 Piece Kit
- 2 - 1/2" Extension Heavy Duty Non Reinforced
- Product Attributes:
- Width EA: 3.5
- Length EA: 58
- Height EA: 1 3/8
-
Features:
- Flexable UV Resistant PVC Rubber
- Pacers Universal Flexy Flare Rubber Fender Extenders are an inexpensive way to protect paint and body panels from dirt, rocks and road debris. Constructed of heavy duty 1/4" thick EPDM rubber, they include a built-in curvature to maintain their form and shape without distorting. These extend the fender a full 2 1/2" using a bolt on design for long lasting durability. Sold in a 4 piece kit, each piece measuring 58" in length. Includes mounting hardware and instructions.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 1971 - Chevrolet El Camino | United States |
- Class 3 Hitch; 2in. Receiver; Select Ford; Chevrolet; GMC C/K (Drilling Required
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~For Models w/34 in. Frame Spacing~For Models w/o 10 in. Step Bumper~Drilling Required~Visibility: Concealed~Install Time 60 Minutes
- CURT 13028 Class 3 Trailer Hitch; 2-Inch Receiver; Drilling Required; Fits Select Ford; Chevrolet; GMC C/K Pickup Trucks
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: Yes
- Install Time: 60 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Chevy Silverado 3500, C30, C3500, C3500HD, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty, F550 Super Duty, GMC C3500, C3500HD and K3500 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1971 - Chevrolet C20 Pickup | V | - | Rear | 8 Cyl 5.7L | 350 |
- Class 2 Multi-Fit Trailer Hitch with 1-1/4in. Receiver
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~Visibility: Concealed
- CURT 12923 Multi-Fit Class 2 Adjustable Hitch; 6-3/4-Inch Drop; 2-Inch Receiver; 3;500 lbs.
- Class II Multi-Fit Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Features An Adjustable Frame To Fit A Variety Of Vehicles
- Tested For Safety In Accordance w/SAE J684
- Robotically Welded For Superior Strength And Fit
- Requires Little Or No Drilling On Most Models
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicles frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4 in. x 1-1/4 in. receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1971 - Chevrolet K20 Pickup | V | - | Rear | 8 Cyl 5.0L | 307 |
- Class 3 Hitch; 2in. Receiver; Select Chevrolet; GMC C/K; Ford Pickup Trucks
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Square Main Body~For Models w/10 in. Step Bumper~Drilling Required~Visibility: Concealed~Install Time 60 Minutes
- CURT 13099 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Chevrolet; GMC C/K; Ford Pickup Trucks
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 1000
- Drilling Required: Yes
- Install Time: 60 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Comes w/Boxed Bolt-On Arms
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits older years of Ford, GMC and Chevy pickup trucks (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1971 - Chevrolet C30 Pickup | V | - | Rear | 8 Cyl 5.7L | 350 |
Showing 1 - 10 of 258 products
Loading...