Image
Product
Price
- 2nd Or 3rd Seat Floor Mats
- Black; 2 pc.; Does Not Cover Hump May Require Trimming For Correct Fit/Trim Guides Molded In Mat
- HD 2ND OR 3RD SEAT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Lincoln Continental | Rear |
- Class 3 Trailer Hitch; 2in. Receiver; Select Ford; Lincoln; Mercury Sedans
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 30 Minutes
- CURT 13707 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford; Lincoln; Mercury Sedans
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Country Squire, Ford Crown Victoria, Lincoln Mark VI, Lincoln Town Car, Mercury Grand Marquis and Mercury Marauder (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine Version | CID |
|---|---|---|---|---|---|---|
| 1980 - Lincoln Mark VI | V | 5753 | Rear | 8 Cyl 5.8L | Modified | 351 |
- Door Lock Actuator, Front and Back
- Product Attributes:
- Connector Gender: Male
- Mounting Hardware Included: Yes
- Package Contents: 1 Door Lock Actuator; Five Activation Rods
- Terminal Type: Blade
-
Features:
- Reliable replacement - this door lock actuator has undergone extensive quality and safety performance testing
- Perfect fit - engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
- Safety compliant - part has undergone simulated crash testing under government guidelines
- Long-lasting repair - cycle testing in an actual vehicle door verifies effective usage for years
- This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
This Part Fits the Following OEM/Substitute Numbers:
5379422, 5379423, 8D1100, 8D1101, AC89700, AC89711, AC89723, DLA1, DLA100, DLA101, DLA11, DLA125, DLA126, DLA245, DLA246, DLA25, DLA26, DLA339...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Lincoln Mark VI | Front Left |
- Door Lock Actuator, Front and Back
- Product Attributes:
- Connector Gender: Male
- Mounting Hardware Included: Yes
- Package Contents: 1 Door Lock Actuator; Five Activation Rods
- Terminal Type: Blade
-
Features:
- Reliable replacement - this door lock actuator has undergone extensive quality and safety performance testing
- Perfect fit - engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
- Safety compliant - part has undergone simulated crash testing under government guidelines
- Long-lasting repair - cycle testing in an actual vehicle door verifies effective usage for years
- This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Lincoln Mark VI | Front Right |
- Matte Black; Not Designed for Vehicles w/Air Bag or Telescopic Column or Radio Controls/Cruise Controls Mounted on Steering Wheel With Horn In Steering Wheel Grant Install Kits Are Necessary To Install A Grant Custom Steering Wheel
- Steering Wheel Installation Kit; Matte Black; Not Designed for Vehicles w/Air Bag or Telescopic Column or Radio Controls/Cruise Controls Mounted on Steering Wheel;
- Steering Wheel Installation Kit
-
Features:
- Complete Step By Step Instructions
- Die Cast Hubs Included
- Grade 5 Hardware
- Matte Black Trim Pieces
- This optional billet hub is available for the ultimate high end look and is intended to be used in place of the 4004 adapter and the standard hub. Included with the billet hub is a machined, highly polished billet aluminum hub featuring a five bolt pattern, step-by-step installation instructions and an emblem center cap, shipped without logo and contains a 1.5 in. emblem recess. See installation kit application guide for more information.
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Lincoln Versailles |
- Bumper Clip - Chrysler
- Deck Lid Panel Package Quantity: 2 Packaging Type: Clamshell
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
15481, 20316, 247-237, 388904S, 40100SCAA01, 4381395, 458100, 458100BP, 6501086, NE458100
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Lincoln Mark VI |
- Panel trim Retainer- Interior- Ford
- Sell Until Depleted Kick Panel Dorman - AutoGrade - Carded Package Quantity: 15 Packaging Type: Clamshell
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
11797, 385661s, 387477S
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Lincoln Mark VI |
- Panel Trim Retainer - GM/Chrysler
- Kick Panel Dorman - AutoGrade - Carded Package Quantity: 2 Packaging Type: Clamshell
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
11797, 11846, 247-055, 385661s, 387477S, 454640, 454640BP, NE454640
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Lincoln Mark VI |
- Chrysler, Ford, GM Panel Retainer
- Package Quantity: 3 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.68
- Package Contents: 3 Retainers
- Outside Diameter: 0.71
- Overall Length: 0.81
- Shaft Diameter: 0.15
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
11569768, 1595864, 1605396, 388577S, 454910, 454910B, 454912B, 456802B, 6030441, W705589S300
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1980 - Lincoln Mark VI | Lower |
- Ford Push Rivet - 1/4 In.
- Front Fender Package Quantity: 4 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.625
- Package Contents: 4 Rivets
- Outside Diameter: 0.625
- Overall Length: 0.562
- Shaft Diameter: 0.25
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
383142S, 479746
Additional Fitment Information:
| Vehicle |
|---|
| 1980 - Lincoln Versailles |
Showing 1 - 10 of 29 products
Loading...