Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tacoma
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 60 Minutes
- CURT 13013 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tacoma
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 60 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota Tacoma | L | 2694 | Rear | 4 Cyl 2.7L | - |
- Cut-Out™ Fender Flares
- 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black
- Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black;
- Cut-Out(TM) Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
-
Features:
- Installation Drilling And/Or Cutting Required
- Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
- Limited Lifetime Warranty
- Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
- Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
- Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
- 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
- Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
- For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.
Additional Fitment Information:
| Vehicle | Position | Bed | Sub Model |
|---|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | Fleetside | SR5 |
- 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black
- Cut-Out™ Fender Flares; 4 pc.; Front Tire Coverage 3 in.; Front Height 5 in.; Rear Tire Coverage 3 in; Rear Height 5.25 in.; Smooth Finish; Black;
- Cut-Out™ Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
-
Features:
- Installation Drilling And/Or Cutting Required
- Premium Tire Coverage For Body Protection - Keeps Dirt And Debris Off The Truck
- Limited Lifetime Warranty
- Perfect For Off-Road Vehicles That Need Extreme Amounts Of Tire Coverage And Clearance
- Tire Coverage Varies With Vehicle 2 in. - 3.5 in.
- Made Of Dura-Flex 2000 ABS Material Which Is Flexible / Yet Durable
- 100 Percent UV Protected Smooth Matte Black Finish Can Be Easily Painted
- Durable / Heavy Duty Hardware Included Which Holds The Flares Securely In Place / Even On The Most Difficult Trails
- For extreme off-road use, theres nothing else like Bushwacker Cut-Out Fender Flares. Each set of Cut-Out Fender Flares is individually designed for your truck, to maximize off-road wheel travel and maintain adequate tire coverage. That custom approach means a smoother appearance, greater strength, and easier bolt-on installation with tough stainless steel hardware. Cut-Out Fender Flares are made from thick, warp-proof Dura-Flex 2000, our own proprietary material, engineered for added durability and flexibility in severe conditions. Its UV protection guards against chalking, while its pro-grade matte black finish looks great as-is, or custom painted to create your own personal look.
Additional Fitment Information:
| Vehicle | Position | Bed | Sub Model |
|---|---|---|---|
| 1996 - Toyota Tacoma | Front and Rear | Fleetside | SR5 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota 4Runner (Square Tube Frame)
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13087 Class 3 Trailer Hitch; 2-Inch Receiver; Square Tube Frame; Fits Select Toyota 4Runner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota 4Runner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota 4Runner | L | 2694 | Rear | 4 Cyl 2.7L | - |
- Front Floor Mats
- Black; 2 piece
- HD FRONT FLOOR MATS
- Heavy Duty Floor Mat
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- 0.3750 in. High Ridges
- Up To 40 percent Taller Ridges
- Extra Thick Driver Heal Pad
- Nibs On Back-Prevent Slippage
- Easily Cleaned
- Made In USA
- Year Round Protection
- Available for virtually all of today's top selling vehicles, Husky Liners Heavy Duty Floor Mats are made ultra tough to take whatever abuse you throw at them. Other mats have met their match.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1996 - Toyota RAV4 | Front | Base |
- Class 2 Multi-Fit Trailer Hitch with 1-1/4in. Receiver
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~Visibility: Concealed
- CURT 12923 Multi-Fit Class 2 Adjustable Hitch; 6-3/4-Inch Drop; 2-Inch Receiver; 3;500 lbs.
- Class II Multi-Fit Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Features An Adjustable Frame To Fit A Variety Of Vehicles
- Tested For Safety In Accordance w/SAE J684
- Robotically Welded For Superior Strength And Fit
- Requires Little Or No Drilling On Most Models
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- When a custom hitch is not available for your vehicle, CURT offers the multi-fit hitch. Designed to be the ultimate in versatility, CURT universal trailer hitches fit several different vehicle manufacturers, including Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, Nissan, Oldsmobile, Plymouth, Pontiac and Toyota. The multi-fit hitch is a universally designed alternative to our custom hitches. It provides a more affordable option and flexibility in installation. Very simply, a CURT multi-fit trailer hitch uses a sliding or adjustable frame to match the width of your vehicles frame. In general, multi-fit hitches are used on mid-size and full-size pickup trucks and SUVs. This class 2 multi-fit trailer hitch features a gross trailer weight capacity of 3,500 lbs., a tongue weight capacity of 350 lbs. and a 1-1/4 in. x 1-1/4 in. receiver tube opening, making it an excellent choice for towing smaller utility trailers, boat trailers and popup campers, as well as cargo carriers and bike racks (NOTE: Never exceed the lowest weight capacity of any towing component). It comes with mounting hardware and instructions, and typically requires little or no drilling during installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota Tacoma | L | 2694 | Rear | 4 Cyl 2.7L | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota 4Runner (Round Tube Frame)
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 35 Minutes
- CURT 13157 Class 3 Trailer Hitch; 2-Inch Receiver; Round Tube Frame; Fits Select Toyota 4Runner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 35 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota 4Runner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota 4Runner | L | 2694 | Rear | 4 Cyl 2.7L | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota RAV4
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13524 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota RAV4
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota RAV4 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota RAV4 | L | 1998 | Rear | 4 Cyl 2.0L | 122 |
- Class 2 Hitch; 1-1/4in.; Select Lexus ES300; ES330; Toyota Avalon; Camry; Solara
- 3500lbs. Gross Trailer Weight; 300lbs. Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 12339 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Lexus ES300; ES330; Toyota Avalon; Camry; Solara
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 30 Minutes
- WC Tongue Weight: 300
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Lexus ES300 or ES330 and Toyota Avalon, Camry or Solara (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 300 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1996 - Toyota Avalon | V | 2995 | Rear | 6 Cyl 3.0L | XL | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Land Cruiser; Lexus LX450
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13089 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Land Cruiser; Lexus LX450
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: Yes
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Land Cruiser and Lexus LX450 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1996 - Toyota Land Cruiser | L | 4477 | Rear | 6 Cyl 4.5L | - |
Showing 1 - 10 of 547 products
Loading...