Image
Product
Price
- Class 3 Hitch; 2in. Receiver; Select Ford Escape; Mazda Tribute; Mercury Mariner
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13650 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford Escape; Mazda Tribute; Mercury Mariner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 30 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Escape, Mazda Tribute and Mercury Mariner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Mazda Tribute | V | 2968 | Rear | 6 Cyl 3.0L | 181 |
- Door Lock Actuator, Front and Rear Left
- Actuator Only
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Actuador Del Seguro De La Puerta
- Material:
- Plastic
- Plástico
- Connector Gender:
-
Features:
- Reliable replacement - this door lock actuator has undergone extensive quality and safety performance testing
- Perfect fit - engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
- Safety compliant - part has undergone simulated crash testing under government guidelines
- Long-lasting repair - cycle testing in an actual vehicle door verifies effective usage for years
- This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
This Part Fits the Following OEM/Substitute Numbers:
1F7058360, 1F8058360, 3L3Z25218A43AA, 3L3Z25218A43AB, 5379430, 6L3Z25218A43AA, 746148, 746148 , 85312, 8D1111, AC89706, APDLA0130, DLA131, DLA136, DLA153, DLA225, DLA247, F81Z25218A43AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Mazda B3000 | Front Left |
- L 60 in. x W 20 in. x H 18 in.; Brite Aluminum; Single Lid
- Special Edition Crown Series Deep Crossover Tool Box; L 69 in. x W 20 in. x H 18 in.; Brite Aluminum; Single Lid;
- Special Edition Crown Series Deep Crossover Tool Box
- Product Attributes:
- Opening Type: Single Lid
-
Features:
- Solid One Piece Construction
- Weather Resistant Seals
- Adjustable Strikers
- Reinforced Foam Filled Lid
- Auto-Lift Shocks
- Aluminum Piano Hinge
- Stainless Steel Pull Handle Latches
- The SEC Brand truck tool boxes were built for performance enthusiasts. The Special Edition Crown series is the first-ever truck tool box line to include industry-exclusive, premium patented features anyone can afford. SEC boxes are built with many features in addition to our standard Better Built features. The Single-Lid Crossover is by far the most popular truck tool box on the market, as well as the most versatile. Better Built pioneered the Crossover style truck toolbox, setting an industry standard that all manufacturers follow today. This box comes in aluminum or steel and can be powder coated black or white.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2006 - Mazda B3000 | Fleetside |
- L 48 in. x W 11.5 in. x H 11 in.
- Side Mount Tool Box; L 48 in. x W 11.5 in. x H 11 in.;
- Side Mount Tool Box
- Product Attributes:
- Opening Type: Single Lid
-
Features:
- Side Mount Tool Box
- BETTER BUILT(R), a WernerCo brand, is an industry leader in Pro value work truck equipment and jobsite storage solutions. Since 1989, BETTER BUILT(R) has provided innovative truck and jobsite storage products for the value-conscious consumer. Thoughtful product design and the newest manufacturing technology help BETTER BUILT(R) create products that are designed to fit your budget. Known for their security and durability, our products help working professionals create a life BETTER BUILT(R). Our product lineup includes truck tool boxes, truck and utility vehicle accessories, transfer tanks, jobsite storage chests, and piano boxes.
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 2006 - Mazda B3000 | 71.8 |
- L 60 in. x W 11.5 in. x H 11 in.
- Side Mount Tool Box; L 60 in. x W 11.5 in. x H 11 in.;
- Side Mount Tool Box
- Product Attributes:
- Opening Type: Single Lid
-
Features:
- Side Mount Tool Box
- BETTER BUILT(R), a WernerCo brand, is an industry leader in Pro value work truck equipment and jobsite storage solutions. Since 1989, BETTER BUILT(R) has provided innovative truck and jobsite storage products for the value-conscious consumer. Thoughtful product design and the newest manufacturing technology help BETTER BUILT(R) create products that are designed to fit your budget. Known for their security and durability, our products help working professionals create a life BETTER BUILT(R). Our product lineup includes truck tool boxes, truck and utility vehicle accessories, transfer tanks, jobsite storage chests, and piano boxes.
Additional Fitment Information:
| Vehicle | Bed Length |
|---|---|
| 2006 - Mazda B2300 | 71.8 |
- Volume 75 Gallons; L 48.25 in. x W 31 in. x H 24 in.; Brite Aluminum; Combo
- Heavy Duty Series Liquid Transfer Tank; Volume 75 Gallons; L 48.25 in. x W 31 in. x H 24 in.; Brite Aluminum; Combo;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 75
-
Features:
- 75 Gallon Capacity
- Includes Mounted Tool Chest For Additional Storage
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed Of Heavy Weight .125 in. Thick Alum.
- Mounting Kit Included
- Vented Lockable Cap Included
- Fully Welded Mounting Brackets
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2006 - Mazda B4000 | Fleetside | 71.8 |
- Volume 100 Gallons; L 45.25 in. W 24 in. x H 24 in.; White Steel; Rectangle
- Heavy Duty Series Liquid Transfer Tank; Volume 100 Gallons; L 45.25 in. W 24 in. x H 24 in.; White Steel; Rectangle;
- Heavy Duty Series Liquid Transfer Tank
- Product Attributes:
- Gallon Capacity: 100
-
Features:
- 100 Gallon Capacity
- Abrasion Resistant Powder Coated Finish
- High Capacity Rectangle Design
- Baffled To Reduce Liquid Movement Inside The Tank
- Constructed From Heavy Duty 14 ga. Steel
- Lifting Eyes For Installation When Tank Is Empty
- Mounting Kit Included
- Vented Lockable Cap Included
- 100 percent pressure tested. Heavy duty 14 gauge steel. Durable powder coated finish. Flush mounted dual 2 in. reinforced bungs strengthen the pump mounting. Baffles add strength while preventing the contents from shifting too quickly. Vented lockable cap. Lifting eyes for installation for when the tank is empty. Welded 11 gauge moutning brackets. Installation kit is included.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2006 - Mazda B4000 | Fleetside | 71.8 |
- Class 3 Hitch; 2in.; Select Mazda B-Series; Ford Ranger (Drilling Required)
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13019 Class 3 Trailer Hitch; 2-Inch Receiver; Drilling Required; Fits Select Mazda B2300; B3000; B4000; Ford Ranger
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- Body Shape: Square
- WD Tongue Weight: 600
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Mazda B2300, B3000, B4000 and Ford Ranger (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Mazda B3000 | V | 2986 | Rear | 6 Cyl 3.0L | 182 |
- Class 3 Hitch; 2in. Receiver; Select Ford Escape; Mazda Tribute; Mercury Mariner
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~For Models Equipped w/Factory 1.25 in. Reciever Hitch~Install Time 60 Minutes~Exhaust Modification Required
- CURT 13651 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford Escape; Mazda Tribute; Mercury Mariner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- WD Tongue Weight: 500
- Install Time: 60 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Escape, Mazda Tribute and Mercury Mariner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Mazda Tribute | V | 2968 | Rear | 6 Cyl 3.0L | 181 |
- Door Lock Actuator, Front and Rear Right
- Actuator Only
- Product Attributes:
- Connector Gender:
- Female
- Hembra
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Actuador Del Seguro De La Puerta
- Material:
- Plastic
- Plástico
- Connector Gender:
-
Features:
- Reliable replacement - this door lock actuator has undergone extensive quality and safety performance testing
- Perfect fit - engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
- Safety compliant - part has undergone simulated crash testing under government guidelines
- Long-lasting repair - cycle testing in an actual vehicle door verifies effective usage for years
- This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.
This Part Fits the Following OEM/Substitute Numbers:
1F7058350, 1F8058350, 3F2Z14S411AA, 3F2Z17218A42AA, 3L3Z25218A42A, 3L3Z25218A42AA, 5379431, 5379432, 6L3Z25218A42AA, 746149, 85313, 8D1110, 8D1111, AC89705, APDLA0129, DLA1130, DLA135, DLA144...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Mazda B3000 | Front Right |
Showing 1 - 10 of 387 products
Loading...