Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Tacoma
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 5500lbs. Weight Distributing; 550lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 45 Minutes
- CURT 13323 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Tacoma
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 550
- Drilling Required: No
- Install Time: 45 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 5500
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,500 lbs. WD and 550 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota Tacoma | V | 3956 | Rear | 6 Cyl 4.0L | 241 |
- Over-Bed Folding Ball Gooseneck Hitch
- Powder Coat Finish; Includes U-Bolt Kit; Mounting Hardware; 2 5/16 in. Ball; 30000lbs. Gross Trailer Weight; 6000lbs. Tongue Weight
- CURT 61052 Over-Bed Folding Ball Gooseneck Hitch; 30;000 lbs; 2-5/16-Inch Ball
- Folding Ball Gooseneck Hitch
- Product Attributes:
- Gross Trailer Weight: 30000 Lbs.
- WARNING CA Proposition 65: No
- WC Tongue Weight: 7500
- Ball Diameter: 2.3125 In.
- Vertical Load: 7500
-
Features:
- Accepts Up To 30000 Lbs. Tw And 7500 Lbs. Vertical Load Limit
- Folding Ball Design Keeps Truck Bed Free Of Obstructions
- Features A T-Handle For Easy Operation
- Stainless Steel Safety Pin And Pivot Spring Prevents Binding
- Permanently Attached Gooseneck Ball Cannot Be Loosened Or Stolen
- Chrome-Plated 2 5/16 In. Trailer Ball Fits All Standard Trailers
- Includes Spring-Loaded Safety Chain Loops And Grade 8 Hardware
- Protected By A Highly Durable Carbide Powder Coat Finish
- Backed By A Limited Lifetime Warranty
- The CURT folding ball gooseneck hitch is an innovation in gooseneck technology, offering a unique solution to the problem of a misplaced or stolen trailer ball. Rather than having a fixed trailer ball that obstructs your truck bed space or a removable ball that locks into place using a set of pins, a folding ball gooseneck hitch features a permanently attached ball that hinges down into a small compartment within the hitch. When folded down, the gooseneck ball remains out of the way and allows you to make full use of your truck bed. When folded back up again, it provides a reliable towing connection for your gooseneck trailer. No matter which position the ball is in, it remains fixed to your pickup truck, deterring theft and preventing loss. The CURT over-bed folding ball gooseneck hitch is just another example of CURT quality and ease of use. This durable hitch has a gross trailer weight capacity up to 30,000 lbs. and a tongue weight capacity of 7,500 lbs. A 2-5/16 in. trailer ball, 3/8 in. thick top plate, six-hole mounting design and U-bolt safety chain hookups ensure that your trailer and payload stay securely attached. The folding mechanism of the over-bed folding ball gooseneck hitch features a stainless steel safety pin and pivot spring to prevent binding, and it comes with a T-handle to make operation of the ball quick and easy. To top things off, we finish each over-bed folding ball gooseneck hitch in a durable carbide powder coat to resist rust and give it a limited lifetime warranty for peace of mind
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Toyota Tundra |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Highlander
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 13534 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Toyota Highlander
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 45 Minutes
- WC Tongue Weight: 500
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Highlander (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota Highlander | L | 2672 | Rear | 4 Cyl 2.7L | 163 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Toyota Sienna (Exposed Main Body)
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes~Under Car Trimming Required
- CURT 13105 Class 3 Trailer Hitch; 2-Inch Receiver; Exposed Main Body; Fits Select Toyota Sienna
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota Sienna | V | 3456 | Rear | 6 Cyl 3.5L | - |
- 2in. Front Receiver Hitch; Select Toyota Tacoma
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Exposed~Install Time 35 Minutes
- CURT 31313 2-Inch Front Receiver Hitch; Select Toyota Tacoma
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 350 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Toyota Tacoma (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota Tacoma | V | 3956 | Front | 6 Cyl 4.0L | 241 |
- 2in. Front Receiver Hitch; Select Toyota 4Runner; FJ Cruiser
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 31367 2-Inch Front Receiver Hitch; Select Toyota 4Runner; FJ Cruiser
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 350 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Toyota 4Runner and FJ Cruiser (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Toyota 4Runner | V | 3956 | Front | 6 Cyl 4.0L | 241 |
- SportRack® Complete Roof Rack System
- Includes Load Bars/Hooks/Feet/Locks; Pair
- SportRack® Complete Roof Rack System; Includes Load Bars/Hooks/Feet/Locks; Pair;
- SportRack(R) Complete Roof Rack System
-
Features:
- Fits Most Of Todays Most Popular Vehicles
- Adaptability Of All Accessories
- Includes Bars/Hooks/Feet/Locks That Are PreAssembled
- No Drilling Required
- Everything in one package; load bars, hooks, locks and every part required: ready to install. Sold as pairs.
Additional Fitment Information:
| Vehicle |
|---|
| 2009 - Toyota Prius |
- 4 pc.; Front Tire Coverage 1 in.; Front Height 5 in.; Rear Tire Coverage 1 in; Rear Height 5 in.; Black; w/o Factory Mud Flaps Installed
- OE Style® Fender Flares; 4 pc.; Front Tire Coverage 1 in.; Front Height 5 in.; Rear Tire Coverage 1 in; Rear Height 5 in.; Black; w/o Factory Mud Flaps Installed;
- OE Style® Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: No
-
Features:
- Sleek - Low-Profile Style Provides Additional Tire Coverage And Finishes The Wheel Well
- Keeps Dirt And Debris Away From Your Vehicle
- Precision Engineered To Fit Your Vehicle And Made Of Durable / Yet Flexible Dura-Flex 2000 ABS Material
- Installs Easily With Little To No Drilling Or Trimming Required! Plus / All Hardware Is Included
- Whether On-Road Or Off - Our Heavy-Duty Hardware Holds The Flares Securely In Place
- Matte Black Or Color Match Finish
- Premium Tire Coverage From 0.5 in. - 2.00 in.
- All Backed By An Industry Leading Warranty
- When you want the look that blends sophistication with design and performance, be ORIGINAL with the OE Style Flare! The low profile, refined contours are precision engineered to match the vehicles styling. Choose the flare that enhances the factory accents while providing premium tire protection.
Additional Fitment Information:
| Vehicle | Position | Bed |
|---|---|---|
| 2009 - Toyota Tundra | Front and Rear | Fleetside |
- OE Style® Fender Flares
- 4 pc.; Front Tire Coverage 1 in.; Front Height 5 in.; Rear Tire Coverage 1 in; Rear Height 5 in.; Black; w/o Factory Mud Flaps Installed
- OE Style® Fender Flares; 4 pc.; Front Tire Coverage 1 in.; Front Height 5 in.; Rear Tire Coverage 1 in; Rear Height 5 in.; Black; w/o Factory Mud Flaps Installed;
- OE Style(R) Fender Flares
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: No
-
Features:
- Sleek - Low-Profile Style Provides Additional Tire Coverage And Finishes The Wheel Well
- Keeps Dirt And Debris Away From Your Vehicle
- Precision Engineered To Fit Your Vehicle And Made Of Durable / Yet Flexible Dura-Flex 2000 ABS Material
- Installs Easily With Little To No Drilling Or Trimming Required! Plus / All Hardware Is Included
- Whether On-Road Or Off - Our Heavy-Duty Hardware Holds The Flares Securely In Place
- Matte Black Or Color Match Finish
- Premium Tire Coverage From 0.5 in. - 2.00 in.
- All Backed By An Industry Leading Warranty
- When you want the look that blends sophistication with design and performance, be ORIGINAL with the OE Style Flare! The low profile, refined contours are precision engineered to match the vehicles styling. Choose the flare that enhances the factory accents while providing premium tire protection.
Additional Fitment Information:
| Vehicle | Position | Bed |
|---|---|---|
| 2009 - Toyota Tundra | Front and Rear | Fleetside |
- BEDMAT FOR DROP-IN 07-21 TOYOTA TUNDRA 5ft.6in. BED
- 1/2 in. Thick; Installs Over Existing Plastic Drop In Bed Liner
- BedRug Floor Truck Bed Mat; 1/2 in. Thick; Installs Over Existing Plastic Drop In Bed Liner;
- BedRug® Floor Truck Bed Mat
- Product Attributes:
- Instructions Included: Yes
- Surface Preparation Required: Yes
- Surface Configuration: Smooth
- Estimated Install Time (Hour): 0.15 - 0.20
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Configuration: One Piece
- Length: 69.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Width: 12.000 In.
- Mounting: Under Bed Rail
- Impact Resistant: Yes
- My Truck Has: A Drop-in Liner
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Xmas Tree Studs
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Superior Comfort/cushioned Knee Friendly Surface
- Tailgate Mat Sold Separately
- Paintable: No
- Tailgate Cover Included: No
- Chemical Resistance: Yes
- Drilling Required: No
- Kit Contents: Truck Bed Mat (tailgate Mat Not Included)
- Install Method: No Drill; Hook And Loop
- Thickness: 0.750 In.
-
Features:
- Tailgate Mat Sold Separately
- Constructed of the same, durable material as the BedRug liner, BedRug Mat works great with drop-in or spray-in/non-liner applications. Available for most popular truck applications, both styles are cut to match the contour of the truck bed.
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2009 - Toyota Tundra | Fleetside | 66.7 |
Showing 1 - 10 of 3727 products
Loading...