Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Nissan Frontier; Suzuki Equator
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 8000lbs. Weight Distributing; 800lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 15 Minutes
- CURT 13241 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Nissan Frontier; Suzuki Equator
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 800
- Drilling Required: No
- Install Time: 15 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 8000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Frontier and Suzuki Equator (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2010 - Suzuki Equator | L | 2488 | Rear | 4 Cyl 2.5L | Premium | 152 |
- 2in. Front Receiver Hitch; Select Nissan Frontier; Pathfinder; Suzuki Equator
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Exposed~Install Time 35 Minutes
- CURT 31241 2-Inch Front Receiver Hitch; Select Nissan Frontier; Pathfinder; Suzuki Equator
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 350 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Nissan Frontier, Nissan Pathfinder and Suzuki Equator (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2010 - Suzuki Equator | V | 3954 | Front | 6 Cyl 4.0L | RMZ-4 | - |
- SportRack® Vista Roof Cargo Bag
- 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars If Your Vehicle Has Factory Crossbars You Do Not Need To Purchase
- SportRack® Vista Roof Cargo Bag; 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars;
- SportRack(R) Vista Roof Cargo Bag
-
Features:
- Collapses Fast And Compacts For Easy Storage
- Water Repellent Coating Helps Keep Contents Dry
- Bag Held Securely To Load Bar/Side Rail/Both w/Heavy Duty Straps
- Fits Most Original Equipment And Aftermarket Crossbars
- Comes Complete With Everything For Installation
- Limited 1 Year Warranty
- The Sherpa Roof Bag gives you additional cargo carrying capacity at a great value. It mounts quickly and conveniently on the roof, even if you only have side rails, and collapses and compacts for easy storage. The Sherpa can carry up to 13 cu. ft. of cargo, protected by its durable, weather resistant construction. The Sherpa mounts directly to most original equipment and aftermarket crossbars with the included straps.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Suzuki SX4 |
- SportRack® Vista Roof Cargo Bag
- 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars Factory Crossbars Are Required To Fit Boxes And Bags To This Vehicle~w/Factory Rack
- SportRack® Vista Roof Cargo Bag; 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars;
- SportRack(R) Vista Roof Cargo Bag
-
Features:
- Collapses Fast And Compacts For Easy Storage
- Water Repellent Coating Helps Keep Contents Dry
- Bag Held Securely To Load Bar/Side Rail/Both w/Heavy Duty Straps
- Fits Most Original Equipment And Aftermarket Crossbars
- Comes Complete With Everything For Installation
- Limited 1 Year Warranty
- The Sherpa Roof Bag gives you additional cargo carrying capacity at a great value. It mounts quickly and conveniently on the roof, even if you only have side rails, and collapses and compacts for easy storage. The Sherpa can carry up to 13 cu. ft. of cargo, protected by its durable, weather resistant construction. The Sherpa mounts directly to most original equipment and aftermarket crossbars with the included straps.
Additional Fitment Information:
| Vehicle |
|---|
| 2010 - Suzuki Grand Vitara |
- 3in. Round Black Steel Side Bars; Select Nissan Frontier; Suzuki Equator
- Includes Side Bars And Mounting Hardware; Carbon Steel; Semi-Gloss Black
- ARIES 209019 3-Inch Round Black Steel Nerf Bars; No-Drill; Fits Select Nissan Frontier; Suzuki Equator
- Aries 3 in. Round Side Bars
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- High-Strength Carbon Steel Construction
- Rust-Resistant Semi-Gloss Black Powder Coat And E-Coat Finish
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3 in. nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3 in. round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3 in. nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Nissan Frontier and Suzuki Equator (see application info to verify fitment). ARIES 3 in. round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2010 - Suzuki Equator | L | 2488 | 4 Cyl 2.5L | Premium | Extended Cab Pickup | 152 |
- Includes Bedliner; Tailgate; Installation Kit
- Pendaliner Under Rail Truck Bed Liner; Includes Bedliner; Tailgate; Installation Kit;
- Pendaliner Under Rail Truck Bed Liner
- Product Attributes:
- WARNING CA Proposition 65: No
- Style: Under Rail
-
Features:
- Extreme Skid Resistance To Protect Your Cargo
- Deep Rich UV Protected Finish
- Rib Design Guards Against Dents And Scrapes
- Custom Fit Allows Water To Drain Away From The Bed
- Resists Gasoline/Oils And Most Chemicals
- Molded In Board Holders And Tailgate Cupholders
- No Drill Install/Tie Down Hole Caps On Most Models
- Satisfaction Guaranteed With No Hassle Warranty
- The Pendaliner SR gives you twice the protection of ordinary bedliners! Its skid-resistant top helps protect your cargo by reducing cargo movement. And its skid-resistant bottom helps protect your truck bed by reducing bedliner movement. You get double the protection with Pendliner SR! Under-rail - A perfect fit if you expect to mount a truck cap, tonneau cover or side rail on your truck, the Pendaliner SR under-rail model also offers the added features of two-tier and compartmental loading. It's easy to separate your cargo with Penda's molded-in board holders.Specially designed detents, a Penda exclusive, lock boards into place. Our board holders are custom designed to match your truck. Their strength is supported by the truck bed, so every load is rock-solid. Our vertical boardholders help separate your load for even greater protection. They also offer another option for double-layer loading, so you have maximum versatility. No-Drill Installation on your bedliner.
Additional Fitment Information:
| Vehicle | Bed | Bed Length | Sub Model |
|---|---|---|---|
| 2010 - Suzuki Equator | Fleetside | 59.5 | RMZ-4 |
- Includes Bedliner; Tailgate; Installation Kit; Without Cargo Channel System
- Pendaliner Under Rail Truck Bed Liner; Includes Bedliner; Tailgate; Installation Kit; Without Cargo Channel System;
- Pendaliner Under Rail Truck Bed Liner
- Product Attributes:
- WARNING CA Proposition 65: No
- Style: Under Rail
-
Features:
- Extreme Skid Resistance To Protect Your Cargo
- Deep Rich UV Protected Finish
- Rib Design Guards Against Dents And Scrapes
- Custom Fit Allows Water To Drain Away From The Bed
- Resists Gasoline/Oils And Most Chemicals
- Molded In Board Holders And Tailgate Cupholders
- No Drill Install/Tie Down Hole Caps On Most Models
- Satisfaction Guaranteed With No Hassle Warranty
- The Pendaliner SR gives you twice the protection of ordinary bedliners! Its skid-resistant top helps protect your cargo by reducing cargo movement. And its skid-resistant bottom helps protect your truck bed by reducing bedliner movement. You get double the protection with Pendliner SR! Under-rail - A perfect fit if you expect to mount a truck cap, tonneau cover or side rail on your truck, the Pendaliner SR under-rail model also offers the added features of two-tier and compartmental loading. It's easy to separate your cargo with Penda's molded-in board holders.Specially designed detents, a Penda exclusive, lock boards into place. Our board holders are custom designed to match your truck. Their strength is supported by the truck bed, so every load is rock-solid. Our vertical boardholders help separate your load for even greater protection. They also offer another option for double-layer loading, so you have maximum versatility. No-Drill Installation on your bedliner.
Additional Fitment Information:
| Vehicle | Bed | Bed Length | Sub Model |
|---|---|---|---|
| 2010 - Suzuki Equator | Fleetside | 73.3 | Sport |
- Class 3 Trailer Hitch; 2in. Receiver; Select Suzuki Grand Vitara
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 4000lbs. Weight Distributing; 400lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13001 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Suzuki Grand Vitara
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight:
- 3500 Lbs.
- 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 400
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 4000
- Receiver Tube Size: 2.000 In.
- Gross Trailer Weight:
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Suzuki Grand Vitara (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2010 - Suzuki Grand Vitara | L | 2393 | Rear | 4 Cyl 2.4L | Premium | - |
- Front Floor Liners
- Gray; 2 piece
- CS FRONT FLOOR LINER
- Classic Style Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Our Classic Style Liners Set The Mold For Auto Floor Protection. Featuring Our Rugged Diamond Plate Look And Formfit Design, These Classic Liners Offer Protection For Vehicles Dating All The Way Back To The 1970s.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body |
|---|---|---|---|
| 2010 - Suzuki Equator | Front | Sport | Crew Cab Pickup |
- Front Floor Liners
- X-ACT FRONT FLOOR LINER
- X-act Contour(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Our Formfit Edge Protects Your Truck/SUV From All Manner Of Mess
- Our Rubberized Duragrip Material Was Designed w/Comfort In Mind
- FormFit Design Forms Each Liner To The Contours Of Your Ride
- Our Exclusive Stayput Cleats Help Keep Your Liners In Place
- No Hassle Lifetime Guarantee For Details
- Huskyliners.Com/ForLife
- Made In The USA
- The Husky Liners X-act Contour perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body |
|---|---|---|---|
| 2010 - Suzuki Equator | Front | Sport | Extended Cab Pickup |
Showing 1 - 10 of 249 products
Loading...