2012 Ford Body Parts
Choose a Model for your 2012 Ford
Image
Product
Price
- Front/2nd Seat Floor Liners (Footwell Coverage)
- Black; 3 pc.; Will Not Fit w/Manual 4x4 Transfer Case Shifter
- WB FR/2ND SEAT FLOOR LNER-FW
- WeatherBeater(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body |
|---|---|---|---|
| 2012 - Ford F-250 Super Duty | Front and Rear | XLT | Crew Cab Pickup |
- Over-Bed Folding Ball Gooseneck Hitch
- Powder Coat Finish; Includes U-Bolt Kit; Mounting Hardware; 2 5/16 in. Ball; 30000lbs. Gross Trailer Weight; 6000lbs. Tongue Weight
- CURT 61052 Over-Bed Folding Ball Gooseneck Hitch; 30;000 lbs; 2-5/16-Inch Ball
- Folding Ball Gooseneck Hitch
- Product Attributes:
- Gross Trailer Weight: 30000 Lbs.
- WARNING CA Proposition 65: No
- WC Tongue Weight: 7500
- Ball Diameter: 2.3125 In.
- Vertical Load: 7500
-
Features:
- Accepts Up To 30000 Lbs. Tw And 7500 Lbs. Vertical Load Limit
- Folding Ball Design Keeps Truck Bed Free Of Obstructions
- Features A T-Handle For Easy Operation
- Stainless Steel Safety Pin And Pivot Spring Prevents Binding
- Permanently Attached Gooseneck Ball Cannot Be Loosened Or Stolen
- Chrome-Plated 2 5/16 In. Trailer Ball Fits All Standard Trailers
- Includes Spring-Loaded Safety Chain Loops And Grade 8 Hardware
- Protected By A Highly Durable Carbide Powder Coat Finish
- Backed By A Limited Lifetime Warranty
- The CURT folding ball gooseneck hitch is an innovation in gooseneck technology, offering a unique solution to the problem of a misplaced or stolen trailer ball. Rather than having a fixed trailer ball that obstructs your truck bed space or a removable ball that locks into place using a set of pins, a folding ball gooseneck hitch features a permanently attached ball that hinges down into a small compartment within the hitch. When folded down, the gooseneck ball remains out of the way and allows you to make full use of your truck bed. When folded back up again, it provides a reliable towing connection for your gooseneck trailer. No matter which position the ball is in, it remains fixed to your pickup truck, deterring theft and preventing loss. The CURT over-bed folding ball gooseneck hitch is just another example of CURT quality and ease of use. This durable hitch has a gross trailer weight capacity up to 30,000 lbs. and a tongue weight capacity of 7,500 lbs. A 2-5/16 in. trailer ball, 3/8 in. thick top plate, six-hole mounting design and U-bolt safety chain hookups ensure that your trailer and payload stay securely attached. The folding mechanism of the over-bed folding ball gooseneck hitch features a stainless steel safety pin and pivot spring to prevent binding, and it comes with a T-handle to make operation of the ball quick and easy. To top things off, we finish each over-bed folding ball gooseneck hitch in a durable carbide powder coat to resist rust and give it a limited lifetime warranty for peace of mind
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford F-150 |
- Class 3 Hitch; 2in. Receiver; Select Ford Escape; Mazda Tribute; Mercury Mariner
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 5000lbs. Weight Distributing; 500lbs. Weight Distributing Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13650 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Ford Escape; Mazda Tribute; Mercury Mariner
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 500
- Drilling Required: Yes
- Install Time: 30 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 5000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford Escape, Mazda Tribute and Mercury Mariner (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 5,000 lbs. WD and 500 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford Escape | L | 2488 | Rear | 4 Cyl 2.5L | 152 |
- 2in. Front Receiver Hitch; Select Ford F-250; F-350 Super Duty
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 9000lbs. Straight-Line Pull; [Available While Supplies Last] No Drilling Required~Visibility: Concealed~Install Time 45 Minutes~Fascia Trimming May Be Required
- CURT 31018 2-Inch Front Receiver Hitch; Select Ford F-250; F-350 Super Duty
- 2 in Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- WARNING CA Proposition 65: No
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
- A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Ford F250 Super Duty and F350 Super Duty (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Ford F-350 Super Duty | V | 6210 | Front | 8 Cyl 6.2L | 4WD | 379 |
- Class 3 Hitch; 2in. Receiver; Select Ford E150; E250; E350 (Round Tube Frame)
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 8000lbs. Weight Distributing; 800lbs. Weight Distributing Tongue Weight Round Main Body~Drilling Required~Visibility: Exposed~Install Time 35 Minutes
- CURT 13055 Class 3 Trailer Hitch; 2-Inch Receiver; Round Tube Frame; Fits Select Ford E150; E250; E350
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 6000
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 800
- Drilling Required: Yes
- Install Time: 35 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 8000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Ford E150, E150 Econoline, E250, E250 Econoline and E350 Super Duty (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Ford E-250 | V | - | Rear | 8 Cyl 5.4L | 330 |
- VANTRED 92-14 FORD E-SERIES STANDARD
- 1/2 in. Closed Cell Foam; Mat Size 116 3/4 in. x 70 1/2 in.
- VanTred Cargo Mat; 1/2 in. Closed Cell Foam; Mat Size 116 3/4 in. x 70 1/2 in.;
- VanTred™ Cargo Mat
- Product Attributes:
- Non Slip Backing: Yes
- Estimated Install Time (Hour): 0.10
- WARNING CA Proposition 65: Yes
- Length: 74.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Cutting Required: No
- Width: 15.000 In.
- Mounting: Cargo Area
- Shape: Molded Assembly
- Features and Benefits:
- Coverage From Back Of Front Seats To Cargo Door
- Easy Clean Up; Will Not Absorb Water
- Excellent Heat And Noise Insulator
- Fits Under Side And Rear Door Scuff Plates
- Heavy Duty Protection
- Molded To Fit Floor Ribs For A Flat Load Surface
- Protects Your Cargo And Easy On The Knees
- Slip And Skid Resistant Tpo Surface
- Stain Resistant; Holds Up To Harsh Chemicals
- Shifter Handle Included: Lays Flat On Oe Cargo Area Floor
- Kit Contents: Complete Cargo Area Mat / Liner
- Install Method: Slide-in
-
Features:
- Heavy Duty Protection
- VanTred is similar to the new BedTred Bed Liner, yet in a mat style. VanTred features 1/2 inch foam backing and a textured, anti-skid TPO composite surface. Designed to act as a shock absorber, VanTred protects the van floor from impact damage.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ford E-250 |
- VANRUG 92-14 FORD E-SERIES STANDARD
- 3/4 in. Closed Cell Foam; Mat Size 116 3/4 in. x 70 1/2 in.
- VanRug Cargo Mat; 3/4 in. Closed Cell Foam; Mat Size 116 3/4 in. x 70 1/2 in.;
- VanRug™ Cargo Mat
- Product Attributes:
- Non Slip Backing: Yes
- Estimated Install Time (Hour): 0.10
- WARNING CA Proposition 65: Yes
- Length: 74.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Cutting Required: No
- Width: 14.000 In.
- Mounting: Cargo Area
- Shape: Molded Assembly
- Features and Benefits:
- Coverage From Back Of Front Seats To Cargo Door
- Easy Clean Up; Will Not Absorb Water
- Excellent Heat And Noise Insulator
- Fits Under Side And Rear Door Scuff Plates
- Molded To Fit Floor Ribs For A Flat Load Surface
- Protects Your Cargo And Easy On The Knees
- Slip And Skid Resistant Fiber Surface
- Stain Resistant; Holds Up To Harsh Chemicals
- Ultra Tough Work Surface
- Shifter Handle Included: Lays Flat On Oe Cargo Area Floor
- Kit Contents: Complete Cargo Area Mat / Liner
- Install Method: Slide-in
-
Features:
- Ultra Tough Work Surface
- VanRug is similar to the BedRug Mat, featuring 3/4 inch custom formed foam backing. Looks and feels like carpet, yet designed for heavy duty use. VanRug is stain resistant and holds up to harsh chemicals.
Additional Fitment Information:
| Vehicle | Sub Model | Wheel FeedBase |
|---|---|---|
| 2012 - Ford E-350 Super Duty | Base | 138.0 |
- Front/2nd Seat Floor Liners (Footwell Coverage)
- Tan; Tie Down Kit
- WB FR/2ND SEAT FLOOR LNER-FW
- WeatherBeater(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Body |
|---|---|---|---|
| 2012 - Ford F-150 | Front and Rear | Harley-Davidson Edition | Crew Cab Pickup |
- BEDRUG 08-16 FORD SUPERDUTY 6.5ft. SHORT BED WITH FACTORY STEP GATE
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step With Tailgate Step
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate; w/Tailgate Step;
- BedRug® Complete Truck Bed Liner
- Product Attributes:
- Instructions Included: Yes
- Surface Preparation Required: Yes
- Estimated Install Time (Hour): 0.20 - 0.50
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Configuration: Multi Piece
- Length: 68.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Width: 15.000 In.
- Mounting: Under Bed Rail And Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Shifter Handle Included: Includes Tailgate Mat
- Paintable: No
- Tailgate Cover Included: Yes
- Chemical Resistance: Yes
- Drilling Required: No
- Kit Contents: Full Truck Bed Liner & Built In Tailgate Mat
- Install Method: No Drill; Hook And Loop
- Item Height: 15.000 In.
-
Features:
- If Installing A Bedrug Over A Spray-In Bedliner
- Supplemental Installation Kit -Brzsprayon- Is Required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2012 - Ford F-350 Super Duty | Fleetside | 81.8 |
- BEDMAT FOR SPRAY-IN OR NO BED LINER 04-14 FORD F-150 6ft.6in. BED
- 3/4 in. Thick; For Use w/Spray On Bed Liner And Non Liner Applications
- BedRug Floor Truck Bed Mat; 3/4 in. Thick; For Use w/Spray On Bed Liner And Non Liner Applications;
- BedRug® Floor Truck Bed Mat
- Product Attributes:
- Instructions Included: Yes
- Surface Preparation Required: Yes
- Surface Configuration: Ribbed
- Estimated Install Time (Hour): 0.15 - 0.20
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Configuration: One Piece
- Length: 69.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Width: 12.000 In.
- Mounting: Under Bed Rail
- Impact Resistant: Yes
- My Truck Has:
- A Spray-in Liner
- No Liner
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Xmas Tree Studs
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Tailgate Mat Sold Separately
- Paintable: No
- Tailgate Cover Included: No
- Chemical Resistance: Yes
- Drilling Required: No
- Kit Contents: Truck Bed Mat (tailgate Mat Not Included)
- Install Method: No Drill; Hook And Loop
- Thickness: 0.750 In.
-
Features:
- Tailgate Mat Sold Separately
- Constructed of the same, durable material as the BedRug liner, BedRug Mat works great with drop-in or spray-in/non-liner applications. Available for most popular truck applications, both styles are cut to match the contour of the truck bed.
Additional Fitment Information:
| Vehicle | Bed | Bed Length | Sub Model |
|---|---|---|---|
| 2012 - Ford F-150 | Fleetside | 78.8 | King Ranch |
Showing 1 - 10 of 4650 products
Loading...