Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Nissan Frontier; Suzuki Equator
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 8000lbs. Weight Distributing; 800lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 15 Minutes
- CURT 13241 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Nissan Frontier; Suzuki Equator
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WD Tongue Weight: 800
- Install Time: 15 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 8000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Frontier and Suzuki Equator (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 800 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Nissan Frontier | L | 2488 | Rear | 4 Cyl 2.5L | 152 |
- Class 3 Trailer Hitch; 2in. Receiver; Select Nissan Xterra
- 4000lbs. Gross Trailer Weight; 400lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13514 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Nissan Xterra
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 4000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 4000
- WD Tongue Weight: 600
- Install Time: 30 Minutes
- WC Tongue Weight: 400
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Xterra (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 4,000 lbs. GTW and 400 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2012 - Nissan Xterra | V | 3954 | Rear | 6 Cyl 4.0L | X | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select Nissan Titan
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 10000lbs. Weight Distributing; 1000lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13199 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Nissan Titan
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 6000
- WD Tongue Weight: 1000
- Install Time: 30 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 10000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Nissan Titan (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 10,000 lbs. WD and 1,000 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Nissan TITAN | V | 5552 | Rear | 8 Cyl 5.6L | RWD | - |
- Track Mount Roof Rack Adapters
- Mount your Safari or Urban rack to your factory rack with tracks.
- Surco Roof Rack Mount Kit
- Product Attributes:
- Prop 65 Warning Label: Prop_65.jpg
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Material: Heavy Duty Steel
- Finish: Black Powder Coat
-
Features:
- Comes as a set of 4 adapters
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Frontier |
- Track Mount Roof Rack Adapters
- Mount your Safari or Urban rack to your factory rack with tracks.
- Surco Roof Rack Mount Kit
- Product Attributes:
- Prop 65 Warning Label: Prop_65.jpg
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Material: Heavy Duty Steel
- Finish: Black Powder Coat
-
Features:
- Comes as a set of 4 adapters
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Pathfinder |
- Safari Roof Rack 50 Inch X 50 Inch, 5 Inch Stanchion
- With 50 years in the industry Surco's has been providing quality products with functionality in mind.The Safari rack mounts easily to your factory rack,gutters or roof with permanently installed rails allowing you store cargo more securely.
- Surco Roof Rack
- Product Attributes:
- Prop 65 Warning Label: Prop_65.jpg
- Product Dimensions: 50 Inches Wide X 50 Inches Long, 5 Inches Deep
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Finish: Black Powder Coat
-
Features:
- 53 inch crossbars included
- Heavy duty aluminum extrusion
- No drilling required
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Titan |
- Safari Roof Rack 50 Inch X 50 Inch, 5 Inch Stanchion
- With 50 years in the industry Surco's has been providing quality products with functionality in mind.The Safari rack mounts easily to your factory rack,gutters or roof with permanently installed rails allowing you store cargo more securely.
- Surco Roof Rack
- Product Attributes:
- Prop 65 Warning Label: Prop_65.jpg
- Product Dimensions: 50 Inches Wide X 50 Inches Long, 5 Inches Deep
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Finish: Black Powder Coat
-
Features:
- 53 inch crossbars included
- Heavy duty aluminum extrusion
- No drilling required
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan TITAN |
- HOOP II; Assist/Side Step; XP3 Black Powder Coat; Single
- XP3 Black Powder Coat; Single Step
- HOOP II Black. corrosion resistant die cast Aluminum. Features Easy installation and strong construction to hold up under extreme conditions
- Hoop II Truck Step
-
Features:
- Exclusive New Multi Mount System
- Limited Lifetime Warranty On Materials/Craftsmanship
- Made Of Corrosion Resistant Durable Cast Aluminum Alloy
- Available In XM3 XP3 XP4 And XP7 Finishes
- Rugged Tread Pattern For Safe And Attractive Non Slip Surface
- Rocker Panel Installation Provides Strong/Easy Installation
- Unique Design Gives The Vehicle A Rugged Off Road Look
- Multi Mount System Is Manufactured From Zinc Plated Steel
- Mounting Heads Designed To Rotate For A Precise Fit
- Resists Scratching/Peeling And Fading
- Uniquely designed diamond tread pattern provides a safe, non-slip surface on the flat step area. Our exclusive multi-mount system is designed for precision fit and easier installation. Constructed of an extremely strong die-cast aluminum alloy for the ultimate inequality and durability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Nissan Xterra | V | 3954 | 6 Cyl 4.0L | - |
- BEDRUG 04+ NISSAN TITAN CREW CAB 5.5
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: Multi Piece
- Length: 68 In
- Style: Custom Fit
- Width: 15 In
- Height: 15 In
- Mounting: Under Bed Rail & Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Instruction Manual Included: Yes
- Category: Bedrug Bedliner
- Paintable: No
- Tailgate Cover Included: Yes
- Drilling Required: No
- Kit Contents: Full Truck Bed Liner & Built In Tailgate Mat
- Extras: Includes Tailgate Mat
-
Features:
- If installing a BedRug over a spray-in bedliner, supplemental installation kit #BRZSPRAYON is required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Region | Bed Length |
|---|---|---|
| 2012 - Nissan TITAN | United States | 67.3 |
- Front & 2nd Seat Floor Liners
- Tech Info: Nissan Altima 4-Door floor liners featuring our new WeatherBeater styling. Liners will not fit 2-Door Coupe Altima models.
- Weatherbeater - Front & 2nd Seat Floor Liners
- Product Attributes:
- CA Prop 65 Type: Cancer And Reproductive
- Location: Front And Second Rows
- Best Value: Yes
- CA Prop 65: Y
- Category: Weatherbeater Series
- Requires Drilling: No
- Driver Position: Left Hand Drive Only
-
Features:
- Our patented FormFit Design™ process gives you a glove-like, laser-tight fit to your make and model. Floorboards are 3D scanned to precisely match the contours of your vehicle.
- Our patented FormFit Edge™ features a raised ridge that runs along the door jam, protecting your truck, van, or SUV from all manner of muck.
- Over vinyl or carpet, our StayPut™ Cleats firmly lock to your factory anchors. It's rock-steady stability underfoot, only by Husky.
- Sporty, rugged, and built for a lifetime of non-stop abuse. Put unbeatable all-weather toughness to work on your floor.
- WeatherBeater™ Liners offer protection that extends all the way to your rear seats. So go ahead, lift the seats and leave them up, load after load. Husky’s got your floors, and your back, no matter what the road brings your way.
- When we say it’s “guaranteed for life” that is exactly what we mean. No hassles, no guff. If you have a problem with this or any Husky product, we’ll replace it.
- Proudly made in the USA.
- Easy to install, remove, and clean. Just yank it out, hose it down and carry on.
- The original all-weather liner is ready, come hell or hot coffee. The Weatherbeater's construction is a no-slip zone with zero edge curl, and its Stay Put Nibs keep it firmly anchored underfoot. It stands up to chemicals and stays tough and flexible, even under extreme temperatures. Its laser-scanned, FormFit Design™ gives your truck, van or SUV an ultra-clean look with easy cleanup to match, while its patented, FormFit Edge™ keeps spills contained, carpets unstained.
Additional Fitment Information:
| Vehicle | Position | Doors | Region |
|---|---|---|---|
| 2012 - Nissan Altima | Front and Rear | 4 | United States |
Showing 1 - 10 of 2441 products
Loading...