2014 BMW Body Parts
Choose a Model for your 2014 BMW
228i
320i
320i xDrive
328d
328d xDrive
328i
328i GT xDrive
328i xDrive
335i
335i GT xDrive
335i xDrive
428i
428i xDrive
435i
435i xDrive
528i
528i xDrive
535d
535d xDrive
535i
535i GT
535i GT xDrive
535i xDrive
550i
550i GT
550i GT xDrive
550i xDrive
640i
640i Gran Coupe
640i xDrive
640i xDrive Gran Coupe
650i
650i Gran Coupe
650i xDrive
650i xDrive Gran Coupe
740Li
740Li xDrive
740i
750Li
750Li xDrive
750i
750i xDrive
760Li
ActiveHybrid 3
ActiveHybrid 5
ActiveHybrid 7
Alpina B7
Alpina B7 xDrive
Alpina B7L
Alpina B7L xDrive
M235i
M5
M6
M6 Gran Coupe
X1
X3
X5
X6
Z4
i3
i8
Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select BMW X3; X4
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 4000lbs. Weight Distributing; 400lbs. Weight Distributing Tongue Weight Square Main Body~Underbody Panel Trimming May Be Required~No Drilling Required~Visibility: Concealed~Install Time 90 Minutes~Temporarily Remove Bumper Cover For Installation
- CURT 13316 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select BMW X3; X4
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 400
- Drilling Required: No
- Install Time: 90 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 4000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made With A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance With Sea J684
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Cast
- Welded
- Seamless Collar
- Equipped With An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the BMW X3 and X4 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - BMW X3 | L | 1997 | Rear | 4 Cyl 2.0L | 122 |
- 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars
- SportRack® Vista Roof Cargo Bag; 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars;
- SportRack® Vista Roof Cargo Bag
-
Features:
- Collapses Fast And Compacts For Easy Storage
- Water Repellent Coating Helps Keep Contents Dry
- Bag Held Securely To Load Bar/Side Rail/Both w/Heavy Duty Straps
- Fits Most Original Equipment And Aftermarket Crossbars
- Comes Complete With Everything For Installation
- Limited 1 Year Warranty
- The Sherpa Roof Bag gives you additional cargo carrying capacity at a great value. It mounts quickly and conveniently on the roof, even if you only have side rails, and collapses and compacts for easy storage. The Sherpa can carry up to 13 cu. ft. of cargo, protected by its durable, weather resistant construction. The Sherpa mounts directly to most original equipment and aftermarket crossbars with the included straps.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW X5 |
- SportRack® Vista Roof Cargo Bag
- 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars w/Factory Rack
- SportRack® Vista Roof Cargo Bag; 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars;
- SportRack(R) Vista Roof Cargo Bag
-
Features:
- Collapses Fast And Compacts For Easy Storage
- Water Repellent Coating Helps Keep Contents Dry
- Bag Held Securely To Load Bar/Side Rail/Both w/Heavy Duty Straps
- Fits Most Original Equipment And Aftermarket Crossbars
- Comes Complete With Everything For Installation
- Limited 1 Year Warranty
- The Sherpa Roof Bag gives you additional cargo carrying capacity at a great value. It mounts quickly and conveniently on the roof, even if you only have side rails, and collapses and compacts for easy storage. The Sherpa can carry up to 13 cu. ft. of cargo, protected by its durable, weather resistant construction. The Sherpa mounts directly to most original equipment and aftermarket crossbars with the included straps.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW X5 |
- Wiring Harness, 2 lamp Connection Adapter (1 EA)
- Ped: Auxiliary Driving Street Legal
- Used together with universal wiring harness to connect two LED lamps to one DT output.
- Product Attributes:
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Wire Length: 2' Wire
-
Features:
- DT connector adaptors: one male end and 2 female end.
- Used together with universal wiring harness to connect two LED lamps to one DT output.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 640i xDrive |
- Wiring Harness, 2 Outputs (1 EA)
- Ped: Auxiliary Driving Street Legal
- Universal wiring harness for auxiliary LED lamps to vehicle battery.
- Product Attributes:
- Power Consumption: N/a
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
-
Features:
- Wiring harness with 2 DT connectors
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW X3 |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select BMW Vehicles
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 45 Minutes
- CURT 11367 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select BMW Vehicles
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 45 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the BMW 228i, 320i, 325i, 328d, 328i, 335i xDrive, 340i, 428i and 435i (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 2014 - BMW 328i xDrive | L | 1997 | Rear | 4 Cyl 2.0L | Wagon | 122 |
- Class 1 Hitch; 1-1/4in. Receiver; Select BMW 535i; 535i xDrive; 550i; 550i xDriv
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Flat Main Body~Drilling Required~Visibility: Concealed~Install Time 60 Minutes~Under Car Trimming Required
- CURT 11381 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select BMW 535i; 535i xDrive; 550i; 550i xDrive
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Flat
- WARNING CA Proposition 65: No
- Drilling Required: Yes
- Install Time: 60 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the BMW 535i, 535i xDrive, 550i and 550i xDrive (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - BMW 535i xDrive | L | 2979 | Rear | 6 Cyl 3.0L | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select BMW X5; X6
- 6000lbs. Gross Trailer Weight; 600lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Round Main Body~No Drilling Required~Visibility: Concealed~Install Time 90 Minutes~Noticeable Fascia Trimming Required
- CURT 13077 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select BMW X5; X6
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 6000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 6000
- Body Shape: Round
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 90 Minutes
- WC Tongue Weight: 600
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the BMW X5 and X6 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 600 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - BMW X6 | V | 4395 | Rear | 8 Cyl 4.4L | - |
- Class 3 Trailer Hitch; 2in. Receiver; Select BMW X1
- 2500lbs. Gross Trailer Weight; 250lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Concealed~Install Time 40 Minutes~For Models w/Panoramic Sunroof
- CURT 13140 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select BMW X1
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 40 Minutes
- WC Tongue Weight: 250
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the BMW X1 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 2,500 lbs. GTW and 250 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2014 - BMW X1 | L | 1997 | Rear | 4 Cyl 2.0L | 122 |
- 95 cm; Black; 1 Pack
- Wingbar Edge Roof Bar; 95 cm; Black; 1 Pack;
- Wingbar Edge Roof Bar
-
Features:
- Wingbar Edge Roof Bar
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - BMW 228i |
Showing 1 - 10 of 1146 products
Loading...