Image
Product
Price
- Class 3 Hitch; 2in.; Select Buick Enclave; Chevy Traverse; GMC Acadia; Outlook
- 5000lbs. Gross Trailer Weight; 500lbs. Tongue Weight; 6000lbs. Weight Distributing; 600lbs. Weight Distributing Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes
- CURT 13424 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Buick Enclave; Chevy Traverse; GMC Acadia; Saturn Outlook
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 5000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 5000
- Body Shape: Square
- WARNING CA Proposition 65: No
- WD Tongue Weight: 600
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 500
- Weight Distribution: 6000
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Buick Enclave, Chevy Traverse, GMC Acadia and Saturn Outlook (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Buick Enclave | V | 3564 | Rear | 6 Cyl 3.6L | 217 |
- Class 2 Hitch; 1-1/4in. Receiver; Select LaCrosse; Regal; XTS; Impala; Malibu
- 3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 25 Minutes
- CURT 12115 Class 2 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Buick LaCrosse; Regal; Cadillac XTS; Chevy Impala; Malibu
- Class II 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 25 Minutes
- WC Tongue Weight: 350
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- Whatever the next checkpoint is on your adventure -- whether its getting your bike on the trail before sunrise or making it to the campground before dark -- CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Buick LaCrosse, Buick Regal, Cadillac XTS, Chevy Impala, Chevy Malibu and Chevy Malibu Limited (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4 in. receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid Bonderite and black powder coat, giving them long-lasting rust and wear resistance.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Buick Regal | L | 2384 | Rear | 4 Cyl 2.4L | 145 |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Chevrolet Cruze; Buick Verano
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~For Models w/o Dual Exhaust~No Drilling Required~Visibility: Concealed~Install Time 15 Minutes~Under Car Trimming Required
- CURT 11282 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Chevrolet Cruze; Buick Verano
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 15 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Chevy Cruze and Buick Verano (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Buick Verano | L | 2384 | Rear | 4 Cyl 2.4L | 145 |
- Class 1 Hitch; 1-1/4in.; Select Buick Encore; Chevrolet Trax (Excluding GX)
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 30 Minutes~Wheel Well Plastic Trimming May Be Required~Hole Enlargement Required
- CURT 11527 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Buick Encore; Chevrolet Trax
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 30 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/Vehicle Specific Design For Custom Fit
- Tested For Safety In Accordance w/SAE J685
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In Rust-Resistant Liquid Bonderite Coating
- Strengthened w/Cast
- Welded
- Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Buick Encore and Chevy Trax (excluding GX; to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2015 - Buick Encore | L | 1364 | Rear | 4 Cyl 1.4L | 83 |
- SportRack® Vista Roof Cargo Bag
- 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars Factory Crossbars Are Required To Fit Boxes And Bags To This Vehicle~w/Factory Rack
- SportRack® Vista Roof Cargo Bag; 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars;
- SportRack(R) Vista Roof Cargo Bag
-
Features:
- Collapses Fast And Compacts For Easy Storage
- Water Repellent Coating Helps Keep Contents Dry
- Bag Held Securely To Load Bar/Side Rail/Both w/Heavy Duty Straps
- Fits Most Original Equipment And Aftermarket Crossbars
- Comes Complete With Everything For Installation
- Limited 1 Year Warranty
- The Sherpa Roof Bag gives you additional cargo carrying capacity at a great value. It mounts quickly and conveniently on the roof, even if you only have side rails, and collapses and compacts for easy storage. The Sherpa can carry up to 13 cu. ft. of cargo, protected by its durable, weather resistant construction. The Sherpa mounts directly to most original equipment and aftermarket crossbars with the included straps.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick Encore |
- 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars Factory Crossbars Are Required To Fit Boxes And Bags To This Vehicle
- SportRack® Vista Roof Cargo Bag; 13 Cubic Ft. Capacity; 35Lx35Wx18H; For Use w/Original Equipment/Aftermarket Crossbars;
- SportRack® Vista Roof Cargo Bag
-
Features:
- Collapses Fast And Compacts For Easy Storage
- Water Repellent Coating Helps Keep Contents Dry
- Bag Held Securely To Load Bar/Side Rail/Both w/Heavy Duty Straps
- Fits Most Original Equipment And Aftermarket Crossbars
- Comes Complete With Everything For Installation
- Limited 1 Year Warranty
- The Sherpa Roof Bag gives you additional cargo carrying capacity at a great value. It mounts quickly and conveniently on the roof, even if you only have side rails, and collapses and compacts for easy storage. The Sherpa can carry up to 13 cu. ft. of cargo, protected by its durable, weather resistant construction. The Sherpa mounts directly to most original equipment and aftermarket crossbars with the included straps.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick Encore |
- Sqr Tube 2" Recvr 5K Wt Cap/500 LB Tong 6K Wt Dist Cap/600 LB Wt Dist Tong
- Uses all existing holes no drilling required
- Class III Square Tube 2 Inch Receiver 5000 Pound Weight Carrying Capacity/ 500 Pound Tongue Weight 6000 Pound Weight Distributing Capacity/ 600 Pound Weight Distributing Tongue Weight Capacity
- Trailer Hitch Rear
- Product Attributes:
- Weight Distributing Capacity (LB): 6000 Pound
- Weight Carrying Tongue Weight (LB): 500 Pound
- Color/ Finish: Black
- Construction: Square Tube
- Weight Distributing Tongue Weight (LB): 600 Pound
- Title: Husky Towing Class Iii Square Hitch
- Class: Iii
- Weight Carrying Capacity (LB): 5000 Pound
-
Features:
- Limited 1 Year Warranty
- Husky Towing Products offers innovative designs, high quality, custom installation and safe, easy operation. Husky is source for a complete line of hitches, electrical products and towing accessories.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick Enclave |
- Wiring Harness, 2 lamp Connection Adapter (1 EA)
- Ped: Auxiliary Driving Street Legal
- Used together with universal wiring harness to connect two LED lamps to one DT output.
- Product Attributes:
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Wire Length: 2' Wire
-
Features:
- DT connector adaptors: one male end and 2 female end.
- Used together with universal wiring harness to connect two LED lamps to one DT output.
Additional Fitment Information:
| Vehicle |
|---|
| 2015 - Buick LaCrosse |
- Front Floor Liners
- Black; 2 pc. Fits Models With 2nd Row Bucket Seats
- X-ACT FRONT FLOOR LINER
- X-act Contour(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Flexible Soft Feel And Factory Finish Look
- Designed To Fit Contours Of Vehicle Floorboards
- Protect Your Vehicles Carpet From Everyday Life
- Designed To Minimize Shifting With StaPutNibs
- Utilizes Your Vehicles Factory Floor Mat Retention
- X-act Contour Floor Liners Are Easy To Clean
- Lifetime Guarantee Against Cracking And Breaking
- Designed And Manufactured In The U.S.A
- The Husky Liners(R) X-act Contour(R) perfectly matches the contours of your truck or SUV and brings together indestructible strength with a soft, comfortable cushion. Add to that a premium look and our exclusive features and you've got liner gold. Punch it, slap it, flick it, kick it. Can you feel it?
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - Buick Enclave | Front |
- 2nd Seat Floor Liner
- Black; 1 pc.; For Models w/2nd Row Bucket Seat
- WB 2ND SEAT FLOOR LINER
- WeatherBeater(TM) Floor Liner
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Style: Molded
-
Features:
- Guaranteed Not To Crack Or Break
- Custom Fit Designed To Specifically Fit Your Vehicle
- Installs Easily In Seconds With No Screws Bolts Fasteners
- Tough And Durable Rubberized Material Resistant To Most Chemicals
- Resists Most Chemicals
- Prevents Stains And Soiling Of Your Carpeted Areas
- Non-Slip Surface
- Minimal Shifting
- Put Nature firmly in its place. The rugged and sporty WeatherBeater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2015 - Buick Enclave | Rear |
Showing 1 - 10 of 376 products
Loading...