Image
Product
Price
- Class 3 Trailer Hitch; 2in. Receiver; Select Fiat 500X
- 3500lbs. Gross Trailer Weight; 525lbs. Tongue Weight Round Main Body~No Drilling Required~Visibility: Exposed~Install Time 45 Minutes
- CURT 13271 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Fiat 500X
- Class III 2 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 3500
- Body Shape: Round
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 45 Minutes
- WC Tongue Weight: 525
- Receiver Tube Size: 2.000 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Sleek Round-Tube Main Body
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Made in USA [may include imported hardware]
- Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Fiat 500X (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 525 lbs. TW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Fiat 500X | L | 1368 | Rear | 4 Cyl 1.4L | Pop | 83 |
- Wiring Harness, 2 lamp Connection Adapter (1 EA)
- Ped: Auxiliary Driving Street Legal
- Used together with universal wiring harness to connect two LED lamps to one DT output.
- Product Attributes:
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
- Wire Length: 2' Wire
-
Features:
- DT connector adaptors: one male end and 2 female end.
- Used together with universal wiring harness to connect two LED lamps to one DT output.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Fiat 500 |
- Wiring Harness, 2 Outputs (1 EA)
- Ped: Auxiliary Driving Street Legal
- Universal wiring harness for auxiliary LED lamps to vehicle battery.
- Product Attributes:
- Power Consumption: N/a
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Prop 65 (C, R or CR): Cr
-
Features:
- Wiring harness with 2 DT connectors
- Concept Series LED Performance Bulbs. Get both a sleek look and improved visibility for safer driving at night with these powerful LED bulbs. With a combined output of 6,000 lumens, these bulbs easily outperform halogen bulbs and even the average quality LED bulbs on the market. Our patented, integrated heat sink design is a breakthrough for headlight and fog light conversions which brings a real Plug & Play experience to users. Converting to LED is as easy as replacing a stock bulb.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Fiat 500X |
- Left Or Right Front Or Rear Door
- Door Striker;
- Door Striker
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Door Striker
- Crown Automotive carries over 9500 unique quality replacement parts encompassing over 766,000 different applications for every model of Jeep produced since 1941.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Fiat 500X | Pop |
- Push-In; Front Or Rear; White; Plastic
- Fender Flare Mounting Retainer; Push-In; Front Or Rear; White; Plastic;
- Fender Flare Mounting Retainer
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fender Flare Mounting Retainer
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Fiat 500X |
- Black; Maximum load 165 lb.
- Evo Raised Rail Foot Pack; Black; Maximum load 165 lb.;
- Evo Raised Rail Foot Pack
-
Features:
- Evo Raised Rail Foot Pack
- Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Fiat 500L |
- 47 in.; Silver
- Wingbar Evo 118 Load Bar; 47 in.; Silver;
- Wingbar Evo 118 Load Bar
-
Features:
- Wingbar Evo 118 Load Bar
- Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Fiat 500 |
- Passage™ Trunk Mount Rack
- 2 Bike Place Top Clips In Gap At Front Edge Of Top Of Trunk/Hatch/Or Door~Place Lower Clips In The Bottom Edge Of Trunk Or Hatch.~Caution- Rear Wiper Cannot Be Used When Carrier Is Mounted.~Lower Arm Of Carrier Will Rest Above License Plate Well.
- Passage™ Trunk Mount Rack; 2 Bike;
- Passage(TM) Trunk Mount Rack
-
Features:
- Entry Level Strap Rack
- Features FitDial Hub For Precise Fit
- Fold Down Arms Provide Compact Storage
- Anti-Sway Cages Provide Bike/Vehicle Protection
- Carries 2 Bikes
- Convenient and easy; this strap rack allows you to carry up to 2 bikes and then folds down for easy storage
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2018 - Fiat 500L | Trekking |
- 47 in.; Black
- Wingbar Evo 118 Load Bar; 47 in.; Black;
- Wingbar Evo 118 Load Bar
-
Features:
- Wingbar Evo 118 Load Bar
- Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack.
Additional Fitment Information:
| Vehicle |
|---|
| 2018 - Fiat 500X |
- Class 1 Trailer Hitch; 1-1/4in. Receiver; Select Fiat 500
- 2000lbs. Gross Trailer Weight; 200lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Fascia Trimming Required~Install Time 40 Minutes~Heat Shield Trimming Required~Hole Enlargement Required~Temporarily Lower Exhaust For Installation~Temporarily Remove Heat Shield For Installation
- CURT 11363 Class 1 Trailer Hitch; 1-1/4-Inch Receiver; Fits Select Fiat 500
- Class I 1.25 in. Receiver Hitch
- Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- Visibility: Exposed
- Weight Carrying Capacity: 2000
- Body Shape: Square
- WARNING CA Proposition 65: No
- Drilling Required: No
- Install Time: 40 Minutes
- WC Tongue Weight: 200
- Receiver Tube Size: 1.250 In.
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- However you define adventure -- whether its climbing onto the back of a mountain bike, hunting from the top of a tree stand or camping with the family a long way from nowhere -- CURT class 1 hitches provide a light-duty towing receiver to help you Bring It. Each is made to fit a specific vehicle, providing easier installation, a better fit and optimal towing capacity. Custom class 1 trailer hitches are available for a variety of smaller vehicle types, including the compact car, crossover, minivan and small SUV. This particular class 1 hitch is designed to be a custom hitch for certain years of the Fiat 500 (to verify vehicle compatibility, see the CURT application guide at curtmfg.com). Tested in accordance with SAE J684, it offers a weight carrying capacity of 2,000 lbs. GTW and 200 lbs. TW. It is equipped with 1-1/4 in. receiver tube opening to accept a ball mount shank or other hitch mount. This class 1 hitch also comes with all necessary mounting hardware. With its lightweight design and smaller receiver tube size, a class 1 hitch is especially useful for adding cargo space with a hitch-mounted bike rack or cargo carrier. They can also typically be used to tow small trailers such as a utility trailer, kayak trailer or teardrop camper (never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). Though CURT class 1 trailer hitches are only intended for light-duty towing, we apply the same principles of quality as we do to the rest of our rear mount hitches. Each class 1 hitch is made with hands-on engineering, high-strength steel and precise welding. We use a co-cured finish of liquid Bonderite, inside and out, and durable black powder coat to provide a lasting defense against rust, chips and UV rays.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 2018 - Fiat 500 | L | 1368 | Rear | 4 Cyl 1.4L | Lounge | 83 |
Showing 1 - 10 of 124 products
Loading...