Image
Product
Price
- Differential Gear Set - DANA 44 4.56 RATIO
- with 4.56 Gear Ratio with Dana Model 44 Axle
- FSGR
- Product Attributes:
- Axle Type: Semi Floating
- Ring Teeth Count: 50
- Gear Ratio: 4.55
- Ring Gear Diameter (In.): 8.500
- Pinion Gear Included: Y
- Ring Gear Included: Y
- Axle Model: Dana 44
- Ring Gear Bolt Qty: 10
- Pinion Shaft Diameter: 0.983
- Ring Gear Rotation: Standard
- Include Installation Kit: Y
- Pinion Spline Count: 26
- Carrier Breaks: 3.92 And Up
- On Vehicle Location: Rear
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Bolt Thread In.: .375-24
-
Features:
- All Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
- Lapped to reduce noise and heat. Lubrication process allows for no break in period.
- Precision heat-treating and shot-peening delivers consistent quality, enhanced life by reducing residual stress doubling the fatigue life of the gear
- High-grade steel for maximum durability
- All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
This Part Fits the Following OEM/Substitute Numbers:
15584145, 3634301, 4506120, 83503087, D44456, DS221055X, YGD44456
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC FC100-22 | Rear |
- with Uncoated 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Length A (In): 3.625
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Rear Axle |
- with Uncoated 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Length A (In): 3.625
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Support Bearing |
- Universal Joint Greaseable 1350 Series
- 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Support Bearing |
- Universal Joint Greaseable 1350 Series
- 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Snap Ring (2): 3.625
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Snap Ring (1): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Support Bearing | RWD |
- Universal Joint
- 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Length A (In): 3.625
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Support Bearing | RWD |
- Universal Joint
- 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Length A (In): 3.625
- Bearing Cap Diameter B (mm): 1.188
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-178X, 2-0052, 2-0053, 2-0053G, 2-0053P, 2-0799, 231, 232, 331, 331BL, 45U0103, 45U0109, 45U0123, 5-178X, UJ231, UJ232, UJ331, UJ331BL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Rear Axle | RWD |
- Universal Joint Greaseable 1350 Series
- 1.188in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC 150-22 | Rear Driveshaft at Rear Axle |
- Differential Gear Set - DANA 44 4.56 RATIO
- with 4.56 Gear Ratio with Dana Model 44 Axle
- FSGR
- Product Attributes:
- Axle Type: Semi Floating
- Ring Teeth Count: 50
- Gear Ratio: 4.55
- Ring Gear Diameter (In.): 8.500
- Pinion Gear Included: Y
- Ring Gear Included: Y
- Axle Model: Dana 44
- Ring Gear Bolt Qty: 10
- Pinion Shaft Diameter: 0.983
- Ring Gear Rotation: Standard
- Include Installation Kit: Y
- Pinion Spline Count: 26
- Carrier Breaks: 3.92 And Up
- On Vehicle Location: Rear
- Cover Bolt Quantity: 10
- Pinion Gear Tooth Quantity: 11
- Ring Gear Bolt Thread In.: .375-24
-
Features:
- All Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
- Lapped to reduce noise and heat. Lubrication process allows for no break in period.
- Precision heat-treating and shot-peening delivers consistent quality, enhanced life by reducing residual stress doubling the fatigue life of the gear
- High-grade steel for maximum durability
- All Spicer ring and pinion gears are designed and tested to meet original equipment specifications. When you purchase genuine Spicer ring and pinion gear sets, you can be confident the ring and pinion set will meet or exceed the exact Dana standards that original equipment manufacturers have relied upon for more than a hundred years.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC FC100-22 | Rear |
- Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter
- 2-23/32 (in) Inside Diameter x 4-7/16 (in) Outside Diameter with 8 Bolt Holes
- FEL-PRO 55350 Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 2.719 Inch Inside Diameter, 4.438 Inch Outside Diameter for Chevrolet Silverado 2500 HD
- Product Attributes:
- : Axle Shaft Flange Gasket
- Inside Diameter: 2.719
- Bolt Hole Quantity: 8
- Outside Diameter: 4.438
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12471641, 327739, 37013, 711465000, 7429210, 76-0002, 760002, 764137, DS14243, J17829
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1952 - GMC 102-22 | Rear |
Showing 1 - 10 of 13 products
Loading...