Image
Product
Price
- Tapered Roller Bearing Cone and Cup Assembly
- Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Mitsubishi Van | Front Inner | RWD |
- Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter
- Eaton Elocker™ Differential; Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter;
- Eaton Elocker™ Differential
-
Features:
- Electromagnetic Locking Differential
- Driver controlled push-button operation
- Most Reliable On-Demand Differential
- 4 Pinion Net-Forged Gear Design For Max Strength And Durability
- Eaton NGR locking rocker switch and wiring harness included
- Works In Forward And Reverse
- The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The ELocker is the most reliable on-demand differential, featuring selectable operation and net-forged gears for added strength.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mitsubishi Van | Front |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone
- National A-1 Taper Bearing Set
- Product Attributes:
- Cone Radius (MM): 1.1680
- Width (Inch): 0.5450
- Cone Length (Inch): 0.5750
- Cone Bore (MM): 17.4630
- Cone Length (MM): 14.6050
- Cup Radius (MM): 1.1680
- Standout (MM): 0.3180
- Taper Bearing Cone: Lm11749
- Cone Bore (Inch): 0.6875
- Cone Radius (Inch): 0.0460
- Cup Length (Inch): 0.4200
- Cup Bore (Inch): 1.5700
- Standout (Inch): 0.0125
- Taper Bearing Cup: Lm11710
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 39.8780
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0069811605, 02667886, 051-3849, 054480, 09265-17101, 09265-29201, 11054489, 11054489A, 11527972, 11600.21084.00, 11600.21408.00, 12934, 1492160, 17017, 184447, 191-598-625, 1GM-405-645, 2013300151...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mitsubishi Precis | Rear Outer |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone
- National A-2 Taper Bearing Set
- Product Attributes:
- Cone Radius (MM): 1.1680
- Width (Inch): 0.6100
- Cone Length (Inch): 0.6550
- Cone Bore (MM): 19.0500
- Cone Length (MM): 16.6370
- Cup Radius (MM): 1.1680
- Standout (MM): 3.4290
- Taper Bearing Cone: Lm11949
- Cone Bore (Inch): 0.7500
- Cone Radius (Inch): 0.0460
- Cup Length (Inch): 0.4750
- Cup Bore (Inch): 1.7810
- Standout (Inch): 0.1350
- Taper Bearing Cup: Lm11910
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 45.2370
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009815905, 0019810905KZ, 00317-33-075, 006-311-427A, 006311427A, 0313-30-075, 0317-33-075, 051-3848, 051-4128, 051-4210, 051-4214, 051-4220, 102719A, 1073300051, 11055109, 1113300051, 1115860433, 1153300051...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mitsubishi Galant | Rear Outer |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone
- National A-5 Taper Bearing Set
- Product Attributes:
- Width (Inch): 0.7100
- Cone Length (Inch): 0.7200
- Cone Bore (MM): 34.9250
- Cone Length (MM): 18.2880
- Cup Radius (MM): 1.1680
- Standout (MM): 4.0640
- Taper Bearing Cone: Lm48548
- Cone Bore (Inch): 1.3750
- Cup Length (Inch): 0.5500
- Cup Bore (Inch): 2.5625
- Standout (Inch): 0.1600
- Taper Bearing Cup: Lm48510
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 65.0880
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009816405, 0019802902, 0069815105, 008-311-123, 008311123, 009 981 67 01, 01V-409-775B, 04626465, 04626735, 051-2618, 05143672AA, 0635 370 049, 0735 371 418, 0S083-33-047, 11101, 12523054, 13H458, 144075C91...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mitsubishi Van | Front Inner |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1988 - Mitsubishi Mighty Max | Front Driveshaft at Front Axle | Base | 4WD |
- Non-Greaseable Premium Universal Joint
- with 2 Joint Driveshaft Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Mighty Max | L | 1997 | At Transmission | 4 Cyl 2.0L | Base | RWD | 122 |
- Non-Greaseable Premium Universal Joint
- with 2 Joint Driveshaft Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 1988 - Mitsubishi Mighty Max | L | 1997 | At Rear Axle | 4 Cyl 2.0L | Base | RWD | 122 |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-1557, 114-310, 11557, 1503, 20131, 20310, 220-0081, 281557, 45U0016, 5-1503X, DT1503, GUM-81, U1503
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 1988 - Mitsubishi Mighty Max | Front Driveshaft at Transfer Case | SPX | 4WD |
- Taper Bearing Set
- Taper Bearing Set Includes Cup and Cone
- National A-4 Taper Bearing Set
- Product Attributes:
- Cone Radius (MM): 3.5560
- Width (Inch): 0.5600
- Cone Length (Inch): 0.5800
- Cone Bore (MM): 26.9880
- Cone Length (MM): 14.7320
- Cup Radius (MM): 1.1680
- Standout (MM): 3.5560
- Taper Bearing Cone: L44649
- Cone Bore (Inch): 1.0625
- Cone Radius (Inch): 0.1400
- Cup Length (Inch): 0.4200
- Cup Bore (Inch): 1.9800
- Standout (Inch): 0.1400
- Taper Bearing Cup: L44610
- Cup Radius (Inch): 0.0460
- Cup Bore (MM): 50.2920
- Part Description: Taper Bearing Set
- Manufactured with premium-grade steel, National® taper bearing sets feature crowned raceways and rollers to ensure even load distribution.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-3843, 054470, 11054479, 11527973, 11600.21413.00, 132066, 14091909, 183834, 183834-1, 20339D, 2072712, 2421062, 2634105, 3024E-1200A, 3024E-1200A1, 31-21-2-634-105, 311-405-615, 311-405-625...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1988 - Mitsubishi Precis | Rear Inner |
Showing 1 - 10 of 69 products
Loading...