1998 Plymouth Driveline and Axles Parts
Choose a Model for your 1998 Plymouth
Image
Product
Price
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 5/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Axle Nut Hex Size (mm): 31.6
- Inboard Shaft Connection Style: Male
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M22*1.5
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 54.7
- Axle Nut Locking Type: Cotter Pin
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Male
- Overall Compressed Length (in): 40.51
- Abs Ring Type: Toothed
- Axle Nut Hex Size (in): 1 1/4
- Number Of Inboard Splines: 25
- Axle Nut Height (mm): 17.8
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 26
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 2 1/7
- Overall Compressed Length (mm): 1029
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
This Part Fits the Following OEM/Substitute Numbers:
139108, 1712, 40-14094S, 410104, 4641856AA, 4641856AC, 4641856AD, 4641856AE, 4808538, 4808568, 60-3108, 60-3228, 60-3286, 60-3385, 60-3386, 650610, 66-3108, 709348...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Plymouth Grand Voyager | Front Right | FWD |
- Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter
- Eaton Elocker™ Differential; Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter;
- Eaton Elocker™ Differential
-
Features:
- Electromagnetic Locking Differential
- Driver controlled push-button operation
- Most Reliable On-Demand Differential
- 4 Pinion Net-Forged Gear Design For Max Strength And Durability
- Eaton NGR locking rocker switch and wiring harness included
- Direct Acting Operation Remains Locked Forward And Reverse
- The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The direct acting mechanism activates in .14 second to provide 100% instant axle lock, and remains locked in both forward and reverse.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Plymouth Voyager | Front |
- Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter
- Eaton Elocker™ Differential; Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter;
- Eaton Elocker™ Differential
-
Features:
- Electromagnetic Locking Differential
- Driver controlled push-button operation
- Most Reliable On-Demand Differential
- 4 Pinion Net-Forged Gear Design For Max Strength And Durability
- Eaton NGR locking rocker switch and wiring harness included
- Works In Forward And Reverse
- The Eaton ELocker is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a dash switch, drivers can go from open to 100-percent locked. A second flip of the switch deactivates the unit to resume normal driving. The ELocker is the most reliable on-demand differential, featuring selectable operation and net-forged gears for added strength.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Plymouth Grand Voyager | V | 2972 | Front | 6 Cyl 3.0L | Base | 181 |
- Hub Assembly
- with 15 (in) Wheels
- QuickSteer 513123 Hub Assembly
- Product Attributes:
- Flange Bolt Hole Quantity: 4
- Anti Lock Brake Sensor Included: No
- Brake Pilot Diameter: 73.200
- Flange Offset: 37.500
- Flange Shape: Rectangular
- Bolt Circle Diameter:
- 114.300
- 4.500
- Hub Pilot Diameter: 86.000
- Wheel Pilot Diameter: 71.300
- Spline Quantity: 26
- Flange Diameter: 139.500
- Wheel Stud Quantity: 5
-
Features:
- OE fit and function
- Quality bearings, seals and sensors
- Designed for smooth, quiet operation
- Delivers dependable performance
- QuickSteerâ„¢ hub assemblies are designed for smooth, quiet operation with OE fit and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
04641517AD, 1009FW, 400.63009, 400.63009E, 4641517, 4641517AD, 4641957AA, 513123, 713123, 720-0016, 951020, BARB636215, BARB636215B, BR930215, BR930248, BRG BR930215, BRG BR930248, H513123...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1998 - Plymouth Voyager | Front |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Plymouth Voyager | V | 3301 | Right | 6 Cyl 3.3L | SE | 201 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 3-Speed Transmission
- with Race
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Plymouth Voyager | V | 2972 | Right | 6 Cyl 3.0L | SE | 181 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Engine - EGM
- with Race
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 1998 - Plymouth Voyager | Right | Expresso |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Engine - EGM
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Plymouth Voyager | V | 3301 | Right | 6 Cyl 3.3L | SE | 201 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- 3-Speed Transmission
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1998 - Plymouth Voyager | V | 2972 | Right | 6 Cyl 3.0L | SE | 181 |
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 5/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Axle Nut Hex Size (mm): 31.6
- Inboard Shaft Connection Style: Male
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M22*1.5
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 54.7
- Axle Nut Locking Type: Cotter Pin
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Male
- Overall Compressed Length (in): 25.12
- Abs Ring Type: Toothed
- Axle Nut Hex Size (in): 1 1/4
- Number Of Inboard Splines: 25
- Axle Nut Height (mm): 17.8
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 26
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 2 1/7
- Overall Compressed Length (mm): 638
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
This Part Fits the Following OEM/Substitute Numbers:
139080, 1711, 1717, 40-14095S, 410105, 4641855AA, 4641855AC, 4641855AD, 4641981, 60-3109, 60-3227, 60-3285, 650609, 66-3109, 709347, 7211N, 72521, 80-1960...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1998 - Plymouth Grand Voyager | Front Left | FWD |
Showing 1 - 10 of 73 products
Loading...