Image
Product
Price
- Universal Joint
- with 3.625in Outside Snap Ring Dimension with Uncoated 1 Piece Driveshaft 1.188in Bearing Cap Diameter Non-Greasable with 1 Piece Rear Drive Shaft
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Snap Ring (1): 3.625
- Snap Ring (2): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Length A (In): 3.625
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-178X, 2-0052, 2-0053, 2-0053G, 2-0053P, 2-0799, 231, 232, 331, 331BL, 45U0103, 45U0109, 45U0123, 5-178X, UJ231, UJ232, UJ331, UJ331BL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Rear Axle |
- Universal Joint Greaseable 1350 Series
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.188in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 1.188
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Rear Axle |
- Universal Joint Greaseable 1350 Series
- with 3.625in Outside Snap Ring Dimension 1 Piece Driveshaft 1.188in Bearing Cap Diameter Greaseable with 1 Piece Rear Drive Shaft
- FSGR
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm — Www.p65warnings.ca.gov
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Snap Ring (2): 3.625
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Length B (In): 3.625
- Bearing Cap Diameter (1): 1.188
- Length A (In): 3.625
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
- Bearing Cap Type: Round
- Snap Ring (1): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm): 1.188
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Rear Axle |
- Non-Greasable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.188in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Uncoated
- HGVF
- Product Attributes:
- California Proposition 65: Warning: Cancer — Www.p65warnings.ca.gov
- Bearing Cap Type: Round
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Length B (In): 3.625
- Bearing Cap Diameter (2): 1.188
- Bearing Cap Diameter (1): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350/spl30
- Bearing Cap Diameter B (mm): 1.188
- Length A (In): 3.625
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 1.188
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Rear Axle |
- Non-Greaseable Super Strength Universal Joint
- Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 234 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.557
- 64.9
- Length Axis 2:
- 2.557
- 64.9
- Length A - Inch: 2.557
- OE Series: Mechanics 3, Saginaw 44 And American Axle 1344
- Length A - mm: 64.9
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: No
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.557
- Length B - mm: 64.9
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lubricateable: No
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2-3011BF, 20040P, 23011G, 45U0136, U3147HP
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Transmission | 4.2i |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 235 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.125
- 28.6
- Bearing Diameter A - mm: 28.5
- Length Axis 1:
- 2.557
- 64.9
- Length Axis 2:
- 2.557
- 64.9
- Length A - Inch: 2.557
- OE Series: Mechanics 3, Saginaw 44 And American Axle 1344
- Length A - mm: 64.9
- Bearing Diameter A - Inch: 1.125
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.125
- 28.5
- Bearing Diameter B - Inch: 1.125
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.557
- Length B - mm: 64.9
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 28.6
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2157105, 45U0110
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Transmission | 4.2i |
- Hub Assembly
- QuickSteer 513188 Hub Assembly
- Product Attributes:
- Flange Bolt Hole Quantity: 3
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 79.000
- Flange Offset: 46.900
- Flange Shape: Triangular
- Bolt Circle Diameter:
- 127.000
- 5.000
- Hub Pilot Diameter: 83.500
- Wheel Pilot Diameter: 77.800
- Spline Quantity: 27
- Flange Diameter: 150.300
- Wheel Stud Quantity: 6
-
Features:
- OE fit and function
- Quality bearings, seals and sensors
- Designed for smooth, quiet operation
- Delivers dependable performance
- QuickSteerâ„¢ hub assemblies are designed for smooth, quiet operation with OE fit and performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
051-6171, 12413037, 12413038, 12413257, 15130858, 402.62004, 402.62004E, 513188, 516171, 713188, 725-0086, 7467245, 8-12413037-0, 8-15130858-0, 91-49149, 951056, BAR-5129-A, BR930397...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Front |
- Greaseable Super Strength Universal Joint
- 0.056 (in) Ring Thickness Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 232A U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2009 - Saab 9-7x | Rear Driveshaft at Transmission | Aero |
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 6/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Inboard Shaft Connection Style: Male
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M24*2
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 41.5
- Axle Nut Locking Type: Self-lock
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Male
- Overall Compressed Length (in): 27.64
- Abs Ring Type: N/a
- Axle Nut Hex Size (in): 1 3/7
- Number Of Inboard Splines: 26
- Axle Nut Height (mm): 21.5
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 27
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 1 5/8
- Overall Compressed Length (mm): 702
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Front Right |
- New CV Axle Shaft
- New CV Axle Shaft
- CV Axle Shaft
- Product Attributes:
- Outboard Bolt Head Size (mm): N/a
- Axle Nut Height (in): 6/7
- Axle Bolt Hex Size (mm): N/a
- Axle Nut Head Type: Hex
- Number Of Inboard Joint Bolt Holes: N/a
- Outboard Bolt Length (mm): N/a
- Outboard Bolt Head Type: N/a
- Inboard Shaft Connection Style: Male
- Inboard Bolt Length (in): N/a
- Axle Nut Thread Size: M24*2
- Axle Bolt Thread Size: N/a
- Number Of Outboard Joint Bolt Holes: N/a
- Axle Nut Length (mm): 41.5
- Axle Nut Locking Type: Self-lock
- Boot Material: Neoprene
- Inboard Bolt Head Size (in): N/a
- Number Of Inboard Shaft Bolts: N/a
- Outboard Bolt Head Size (in): N/a
- Inboard Joint Type: Male
- Overall Compressed Length (in): 27.64
- Abs Ring Type: N/a
- Axle Nut Hex Size (in): 1 3/7
- Number Of Inboard Splines: 26
- Axle Nut Height (mm): 21.5
- Number Of Outboard Shaft Bolts: N/a
- Outboard Joint Bolt Thread Size: N/a
- Outboard Bolt Length (in): N/a
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Inboard Bolt Head Size (mm): N/a
- Number Of Outboard Splines: 27
- Axle Bolt Length (mm): N/a
- Inboard Bolt Length (mm): N/a
- Outboard Shaft Connection Style: Conventional
- Inboard Bolt Head Type: N/a
- Axle Nut Length (in): 1 5/8
- Overall Compressed Length (mm): 702
- Inboard Bolt Thread Size: N/a
- Limited Lifetime Warranty. ABS axles fit non-ABS applications unless otherwise noted. ISO 9001:1007 and TS 16949:2009 Certified Company
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1055, 1445N, 179135, 26079789, 40-16109, 411518, 60-1345, 66-1345, 70575, 708521, 80-1520, 80-5097, 801518, 8260797890, 9422, 9422N, 949049, 95097...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Saab 9-7x | Front Left |
Showing 1 - 10 of 154 products
Loading...