Image
Product
Price
- Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 3.000 Inch Inside Diameter
- 4 (in) Bolt Circle 3.00 (in) Inside Diameter x 4-5/8 (in) Outside Diameter with 8 Bolt Holes
- FEL-PRO 55328 Drive Axle Shaft Flange Gasket 8 Bolt Hole Gasket, 3.000 Inch Inside Diameter for Ford F-350
- Product Attributes:
- : Axle Shaft Flange Gasket
- Inside Diameter: 3.000
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
37012, 5086767AC, 711465100, 7429202, 764136, D0TZ1001A, DS14239, E0TZ1001A, F3UZ1001A, J26027, J26212
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | V | - | 8 Cyl 5.7L | 345 |
- Axle Shaft Nut;
- Axle Shaft Nut
-
Features:
- Axle Shaft Nut
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Ram 3500 |
- For Use w/8.25 in. 10 Bolt And 9.25 in. 12 Bolt Axle
- Axle Shaft Seal; Rear Outer; For Use w/8.25 in. 10 Bolt And 9.25 in. 12 Bolt Axle;
- Axle Shaft Seal
-
Features:
- Axle Shaft Seal
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Ram 1500 | Rear Outer | Big Horn |
- For Use w/8.25 in. 10 Bolt Axle
- Axle Shaft Bearing; Rear; For Use w/8.25 in. 10 Bolt Axle;
- Axle Shaft Bearing
-
Features:
- Axle Shaft Bearing
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2012 - Ram 1500 | Rear | Outdoorsman |
- Axle Shaft Universal Joint Non-Greaseable; AAM1555WJ Series
- Non-Greasable with AAM 1555 Series Wheel Joint
- FSGR
- Product Attributes:
- Bearing Cap Type: Round With Isr Groove
- Bearing Cap Type B: Isr
- Snap Ring (1): 3.737
- Snap Ring (2): 3.737
- Length B (mm): 94.7
- SR(2)Brng Cap to Brng Cap(OSR): 3.737
- Mounting Hardware Included: N
- Bearing Cap Type A: Isr
- Grease Zerk Included: Not Required
- Greaseable: N
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Aam
- OEM Series: 1555wj
- Bearing Cap Diameter B (mm):
- 1.375
- 34.925
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 94.7
- SR(1)Brng Cap to Brng Cap(OSR): 3.737
- Type: Isr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.375
- 34.925
-
Features:
- Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
- Bearing cups are heat treated for strength
- precision-ground and case-hardened for durability.
- Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
- Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
3-1557, 31557, 479, 6806 5428AA, 6806 5428AB, 6806 5428AC, 6806 5428AD, 68065428AA, 68065428AB, 68065428AC, 68065428AD, 74081555, DS53212X, P479, UJ479
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2012 - Ram 3500 | Front Axle at Wheels | 4WD |
- Axle Shaft Universal Joint Non-Greaseable; AAM1555WJ Series
- Non-Greasable with AAM 1555 Series Wheel Joint
- FSGR
- Product Attributes:
- Bearing Cap Type: Round With Isr Groove
- Bearing Cap Type B: Isr
- Length B (mm): 94.7
- SR(2)Brng Cap to Brng Cap(OSR): 3.737
- Mounting Hardware Included: N
- Bearing Cap Type A: Isr
- Grease Zerk Included: Not Required
- Greaseable: N
- Bearing Cap Diameter (2): 1.375
- Bearing Cap Diameter (1): 1.375
- OEM Mfg: Aam
- OEM Series: 1555wj
- Bearing Cap Diameter B (mm):
- 1.375
- 34.925
- Snap Ring Included: Y
- Snap Ring Type: Internal
- Length A (mm): 94.7
- SR(1)Brng Cap to Brng Cap(OSR): 3.737
- Type: Isr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.375
- 34.925
-
Features:
- Journal cross is engineered with a solid cold-formed body to ensure better wear and overall strength.
- Bearing cups are heat treated for strength
- precision-ground and case-hardened for durability.
- Multi-lip seal keeps grease in and contaminants out, and gets maximum retention in a wider range of environments.
- Thrust washers eliminate metal-to-metal contact, prevent wear and lower the overall operating temperature.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2012 - Ram 3500 | Front Axle at Wheels | 4WD |
- Non-Greasable with 2 Piece Rear Drive Shaft 1.062in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330/spl25
- Bearing Cap Diameter B (mm): 27
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 27
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2012 - Ram 1500 | Rear Driveshaft at Support Bearing | Express | RWD |
- Non-Greasable with 2 Piece Rear Drive Shaft 1.062in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330/spl25
- Bearing Cap Diameter B (mm): 27
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 27
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15-213X, 2-0790, 2-4800, 2-4800G, 2-4800P, 2-4801, 254, 270, 354, 45U0106, 45U0115, 45U0141, 5-213X, UJ254, UJ270, UJ354
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2012 - Ram 1500 | Rear Driveshaft at Transmission | Tradesman | RWD |
- 1.062in Bearing Cap Diameter Non-Greasable 1 Piece Driveshaft with 1 Piece Rear Drive Shaft with 3.625in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Type A: Osr
- Greaseable: N
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1330/spl25
- Bearing Cap Diameter B (mm): 27
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Bearing Cap Diameter A (mm): 27
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2012 - Ram 1500 | V | - | Front Driveshaft at Front Axle | 8 Cyl 4.7L | 4WD | 287 |
- BD Dodge Front Differential Cover AA 14-9.25 - 2500 2003-2013 / 3500 2003-2012
- AA 14-9.25;
- BD Dodge Front Differential Cover AA 14-9.25 - RAM 2500 2003-2013 / RAM 3500 2003-2012
- Front Diff Cover
- Product Attributes:
- Category: Diff Covers
- Engine: 6.7l Cummins 13-18
- Suggested Product: 1061825-rcs
- Make: Dodge
- Prop 65 (C, R or CR): Cr
-
Features:
- Cast Aluminum Internal and external cooling fins
- Separate fill and drain port
- Stainless steel allen head cap bolts, fill plug
- Magnetic drain plug
- Add a stylish look to your front end with a BD Front Diff cover. Made from cast aluminum, BD differential covers have both internal and external fins for extra cooling plus a sleek curved design. Comes with separate fill and drain ports with stainless steel plugs for easier servicing. Includes stainless steel Allen head cap bolts and magnetic drain plug to help capture suspended material in the oil. Designed to be compatible with aftermarket track bars.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Ram 3500 | L | - | 6 Cyl 6.7L | 408 |
Showing 1 - 10 of 599 products
Loading...