Image
Product
Price
- Rear Wheel Bearing and Hub Assembly
- MOOG 512632 Rear Wheel Bearing and Hub Assembly for Honda CR-V
- Product Attributes:
- Flange Bolt Hole Quantity: 4
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 64.010
- Flange Offset: 55.810
- Bolt Circle Diameter: 114.300
- Hub Pilot Diameter: 80.120
- Wheel Pilot Diameter: 64.010
- Spline Quantity: 23
- Flange Diameter: 151.750
- Wheel Stud Quantity: 5
-
Features:
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Wheel Stud Bolts: Wheel studs feature a protective coating that helps prevent rust and corrosion, allowing easier removal and proper torquing of the wheel nut.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
42200TLAA51, BR931201, HA590727, MB60318, WE61890
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2017 - Honda CR-V | Rear | EX | AWD |
- CV Axle Assembly
- MOOG 13E004R CV Axle Assembly
- Product Attributes:
- Compressed Length:
- 22.83
- 580
- Grade Type: Premium
- Inboard Spline Quantity: 25
- ABS Tone Ring Included: No
- Outboard Boot Material: Neoprene
- Outboard Joint Type: Conventional
- Axle Nut Included: Yes
- Axle Nut Thread Size: M26×1.5
- Outboard Spline Quantity: 30
- Inboard Joint Type: Male
- Inboard Boot Material: Neoprene
- Axle Nut Type: Hex
- Compressed Length:
-
Features:
- KEEPS DIRT & MOISTURE OUT -- Durable neoprene boot keeps water and dirt out to help prevent premature failure
- ADDED RUST PROTECTION -- Specially engineered coating applied to intermediate shaft and inboard and outboard housings to inhibit premature wear caused by rain, snow, salt and road grime
- BUILT TO LAST -- Heat-treated bearings, races and housings for optimal joint function, articulation and geometry
- PRECISE FIT -- Splines ensure precise fit of the axle into the mating hub
- EVERYTHING FOR THE REPAIR -- Comes with axle nut and inboard bolts (where required)
- Backed by premium materials and rigorous testing, MOOG® CV axles deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
44305T2AA50, 44305T2AA52, 44305T2AA71, 44305TA0A00, 44305TA0A01, 44305TA0A50, 44305TA0A51, 44305TA0A53, 44305TL2E50, 44305TL2E51, 44305TL2E53, 664251
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|
| 2017 - Honda Accord | L | 2356 | Manual | Front Right | 4 Cyl 2.4L | 144 |
- Rear Wheel Bearing and Hub Assembly
- MOOG 512516 Rear Wheel Bearing and Hub Assembly for Honda Accord
- Product Attributes:
- Flange Bolt Hole Quantity: 4
- Anti Lock Brake Sensor Included: Yes
- Brake Pilot Diameter: 64.000
- Flange Offset: 58.800
- Flange Shape: Square
- Bolt Circle Diameter:
- 114.300
- 4.500
- Hub Pilot Diameter: 77.900
- Wheel Pilot Diameter: 64.000
- Flange Diameter: 139.300
- Wheel Stud Quantity: 5
-
Features:
- Innovative roll form design ensures consistent and optimal preload.
- Precision Matched Components: Rigorously controlled manufacturing processes ensure exact matching of bearing raceways and rolling elements to consistently deliver superior performance and minimize noise and vibration.
- Engineered to overcome problems and deliver smooth, reliable performance.
- MOOG hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles.
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
42200-T3V-A51, 91-540737, BR930856, HA590484, MB60312, WE61863
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Honda Accord | Rear |
- Spindle Nut M26-1.50 Hex Size 36 mm
- Thread Size: M26-1.5 Package Quantity: 2 Dorman - AutoGrade - Boxed Packaging Type: Box
- Product Attributes:
- Hex Size: 35.7 Mm
- Point Quantity: 6
- Slotted Type:
- No
- Non
- Bridge Nut Socket Needed:
- No
- Non
- Thread Type:
- Coarse
- Grueso
- Thread Diameter: 26
- Contenidos del paquete: 2 Tuerca De Husillo
- One Time Use:
- No
- Non
- De un solo uso.: No
- Material:
- Acero
- Steel
- Tuerca de puente de eje necesaria: No
-
Features:
- Direct replacement - this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
90305S3VA11
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Honda Accord | Front |
- Spindle Nut M26-1.50 Hex Size 36 mm
- Thread Size: M26-1.5 Package Quantity: 2 Dorman - AutoGrade - Boxed Packaging Type: Box
- Product Attributes:
- Hex Size: 35.7 Mm
- Point Quantity: 6
- Slotted Type:
- No
- Non
- Bridge Nut Socket Needed:
- No
- Non
- Thread Type:
- Coarse
- Grueso
- Thread Diameter: 26
- Contenidos del paquete: 2 Tuerca De Husillo
- One Time Use:
- No
- Non
- De un solo uso.: No
- Material:
- Acero
- Steel
- Tuerca de puente de eje necesaria: No
-
Features:
- Direct replacement - this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution - this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction - this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Honda Odyssey | Front |
- Front Right Loaded Knuckle
- Includes Hub, Bearing, and Dust Shield Loaded Knuckle
- Product Attributes:
- Instruction Manual Included:
- No
- Non
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Axle Included:
- No
- Non
- Contenidos del paquete:
- 1 Deflector De Polvo
- 1 Nudillo Cargado
- 1 Pasador De Chaveta
- 1 Perno
- 1 Tuerca Del Eje, 1 Tuerca De Seguridad
- Spline Quantity: 30
- Hub Included:
- Oui
- Sí
- Yes
- Material:
- Acero
- Steel
- Finish:
- Painted
- Pintado
- Instruction Manual Included:
-
Features:
- Pre-pressed assembly - this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours - eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution - no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering - designed in the United States and backed by a century of automotive aftermarket experience
- Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.
This Part Fits the Following OEM/Substitute Numbers:
44300T2AA51, 44300T2AA61, 44600T2FA01, 45255T2AA00, 51210T2AK01, LK018, SK698474, WLK018
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2017 - Honda Accord | Front Right | Sport Special Edition |
- Front Right Loaded Knuckle
- Loaded Knuckle, Includes Hub, Bearing, and Dust Shield
- Product Attributes:
- Instruction Manual Included:
- No
- Non
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Natural
- Negro
- Axle Included:
- No
- Non
- Contenidos del paquete:
- 1 Nudillo De Carga
- 1 Tornillo
- 1 Tuerca De Eje
- Spline Quantity: 30
- Hub Included:
- Oui
- Sí
- Yes
- Material:
- Acero
- Steel
- Finish:
- Painted
- Pintado
- Instruction Manual Included:
-
Features:
- Pre-pressed assembly - this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours - eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution - no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering - designed in the United States and backed by a century of automotive aftermarket experience
- Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.
This Part Fits the Following OEM/Substitute Numbers:
44300TG7A01, 44600TG7A00, 45255TZ5A00, 51211TZ5A00
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Honda Pilot | Front Right |
- Front Left Loaded Knuckle
- Loaded Knuckle, Includes Hub, Bearing, and Dust Shield
- Product Attributes:
- Instruction Manual Included:
- No
- Non
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Black
- Natural
- Negro
- Axle Included:
- No
- Non
- Contenidos del paquete:
- 1 Nudillo De Carga
- 1 Tornillo
- 1 Tuerca De Eje
- Spline Quantity: 30
- Hub Included:
- Oui
- Sí
- Yes
- Material:
- Acero
- Steel
- Finish:
- Painted
- Pintado
- Instruction Manual Included:
-
Features:
- Pre-pressed assembly - this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours - eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution - no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering - designed in the United States and backed by a century of automotive aftermarket experience
- Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install. For repair shops, that makes it less likely that you will have a vehicle stuck in the service bay. For vehicle owners, that makes this formerly complex job requiring special equipment much easier.
This Part Fits the Following OEM/Substitute Numbers:
44300TG7A01, 44600TG7A00, 45255TZ5A00, 51216TZ5A00
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Honda Pilot | Front Left |
- Front Right Loaded Knuckle
- Loaded Knuckle, Includes Hub, Bearing, and Dust Shield
- Product Attributes:
- Flange Bolt Hole Diameter: 12.85
- Anti Lock Braking System Type: Sensor
- Mounting Hardware Included:
- No
- Non
- Stud Thread Type:
- Media
- Medium
- Flange Bolt Hole Quantity: 5
- Stud Threads Per Inch:
- 1
- 1 Ensamble De Manguera Del Calentador
- Inside Diameter: 114.3
- Drive Type:
- Driven
- Impulsado
- Flange Bolts Included:
- Oui
- Sí
- Yes
- Hub Pilot Diameter: 51
- Wheel Studs Included:
- Oui
- Sí
- Yes
- Flange Included:
- Oui
- Sí
- Yes
- Wheel Stud Size: M12 X 1.5
- Bolt Circle Diameter: 114.3 Mm
- Connector Quantity: 0
- Spline Quantity: 30
- Wheel Stud Quantity: 5
- Connector Terminal Quantity: 0
- Anti Lock Brake Sensor Included:
- No
- Non
- Brake Pilot Diameter: 152.3
- Bearing Generation: Gen 1
- Anti Lock Braking System:
- Oui
- Sí
- Yes
- Flange Shape: Circular
- Wheel Pilot Diameter: 64
- Contenidos del paquete: 1 Ensamble De Rodamiento Y Maza
- Terminal Gender:
- Female
- Hembra
- Bearing Type:
- Ball
- Rótula
- Knuckle Pilot Hole Diameter: 12.85
- Flange Diameter: 152.3
-
Features:
- Pre-pressed assembly - this complete loaded knuckle kit includes all necessary components ready for installation right out of the box
- Saves hours - eliminates the possibility of extended time spent wrestling with individual corroded components
- Simpler solution - no need for hydraulic press to perform complete bearing repair, making replacement faster and more predictable for both professionals and DIYers
- Quality engineering - designed in the United States and backed by a century of automotive aftermarket experience
- Fixing a worn wheel bearing would traditionally require a difficult procedure using a hydraulic press, or purchasing multiple components. This Dorman OE FIX loaded knuckle includes all critical components already assembled for a fast, simple, safe install
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2017 - Honda CR-V | Front Right |
- When replacing an intermediate shaft, it is recommended that the associated CV axle be replaced as well. Standard Duty Replacement
- CV Intermediate Shaft
This Part Fits the Following OEM/Substitute Numbers:
15164N, HO-3516
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2017 - Honda Accord | V | 3471 | Automatic CVT | Front Right | 6 Cyl 3.5L | FWD | - |
Showing 1 - 10 of 763 products
Loading...