Image
Product
Price
- 4 Way Flat Output; Converts 2-Wire/3-Wire/PWM ST System To 2-Wire Trailer Light Wiring; Req. Powered Converter Wiring Kit PN[55152] or Similar
- CURT 56236 Multi-Function Splice-in Tail Light Converter; 4-Pin Wiring Harness
- Multi-Function Taillight Converter
- Product Attributes:
- Output Type: 4-way Flat
- WARNING CA Proposition 65: Yes
-
Features:
- Converts 2-Wire 3-Wire Or Pwm St System To 2-Wire Trailer Light
- Enclosure Significantly Increases Water And Vibration Resistance
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Constructed w/Smt Circuitry For Better Performance And Durability
- Microcontroller Senses Current To Rapidly React To Overload
- Provides Improved Overload Short-Circuit And Thermal Protection
- Low-Voltage Operation Allows Function Down To Seven Volts
- Color-Coded Wires w/Wiring Guide For Easier Installation
- Dust Cover Included To Keep Connector Clean When Not In Use
- Made In USA
- Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. The CURT multi-function electrical converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. The CURT multi-function electrical converter comes with pigtail wires that are able to be spliced into two-wire, three-wire or PWM wiring system with combined stop and taillights. It converts any of these systems to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. The converter is controlled using a microcontroller that is able to sense the current passing through it, allowing for quick reaction to dangerous conditions such as overload and short circuits. It also filters unwanted input signals to protect your wiring systems and uses a mere seven volts for low-voltage operation. The CURT multi-function taillight converter is a heavy-duty electrical converter for virtually any vehicle-trailer combination. It comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package also includes four snap locks for faster, more secure splicing. A powered converter wiring kit #55152 is also required for installation.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Rio |
- Custom Wiring; 4-Way Flat Output; Select Hyundai Entourage; Kia Sedona; Seltos
- 4-Way Flat Output
- CURT 56442 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Hyundai Entourage; Kia Sedona; Seltos
- Custom Wiring Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped w/Powered Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Hyundai Entourage, Kia Sedona and Kia Seltos (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Soul |
- Custom Wiring Harness; 4-Way Flat Output; Select Kia Sportage
- Heavy Duty; Circuit Protected And Powered; 3-Wire System; 4 Way Flat; Tail Light Circuit 7.5 Amps; Turn And Brake Circuits 7.5 Amps
- CURT 56321 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Kia Sportage
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Heavy Duty Circuit Protected And Powered
- WARNING CA Proposition 65: Yes
- Install Time: 60 Minutes
- Turn and Brake Circuits: 7.5 Amp
- Tail Light Circuits: 7.5 Amp
-
Features:
- Plugs Into Tail Light Assembly To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Kia Sportage (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Sportage |
- Custom 4-Flat; Select Hyundai and Kia Vehicles; OEM Tow Package Required
- 3-Wire System; 4-Way Flat; 10 Amps Max For Models w/Factory Tow Package
- CURT 56332 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Hyundai Santa Fe; XL; Veracruz; Kia Sedona; Sorento
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected Powered
- WARNING CA Proposition 65: Yes
- Install Time: 20 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped w/Powered Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- Made In USA
- CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Hyundai Santa Fe, Santa Fe XL and Veracruz and Kia Sedona and Sorento (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Sedona |
- Custom Wiring Harness; 4-Way Flat; Select Hyundai; Kia; Tow Package Needed
- 2-Wire System; 4-Way Flat Socket 2-Wire System; 4-Way Flat Socket
- CURT 56420 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Hyundai Palisade; Santa Fe; Tucson; Kia Telluride; Carnival
- Custom Wiring Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into OEM Vehicle Socket To Provide A 4-Way Flat Socket
- Plug-And-Play Design Eliminates The Need For Cutting Or Splicing
- 4-Way Flat Output Connect Tail Lights/Brake Lights/Turn Signals
- Equipped With A 3-Wire To 2-Wire Electrical Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Hyundai Palisade, Hyundai Santa Fe and Kia Telluride (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Telluride |
- 7-Way Round RV Blade; 7.5 Amps Tail Light Circuit; 5.0 Amps Turn And Brake Circuit
- CURT 56466 Vehicle-Side Custom RV Blade 7-Pin Trailer Wiring Harness; Fits Select Hyundai Palisade; Santa Cruz; Kia Telluride
- Custom Wiring Connector
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Vehicle Tail Light Assembly To Provide A 7-Way RV Blade Socket
- Simple Plug-And-Play Design Eliminates The Need For Cutting Or Splicing
- 7-Way Connects Tail/Brake/Reverse/Turn Signals/Brakes And Auxiliary Power
- Equipped With Tail Light Converter For Vehicle-Trailer Compatibility
- Constructed With SMT Circuitry For Better Performance And Durability
- Spring-Loaded Dust Cover Keeps Connector Clean When Not In Use
- Slit Loom Keeps Wires Contained And Well Protected
- Backed By A Limited One-Year Warranty
- CURT custom wiring connectors and harnesses are the easiest way to outfit your vehicle with a trailer wiring connection for towing. Each one is custom fitted to work with a specific make and model. This particular 7-way RV blade socket is designed to be a custom wiring option for certain years of the Hyundai Palisade, Hyundai Santa Cruz, and Kia Telluride (see application info to verify fitment). It provides a universal trailer connection for the taillights, brake lights, reverse lights, turn signals, electronic trailer brakes and auxiliary power. 7-prong taillight wiring can be used as a replacement or new wiring and is typically used for towing fifth wheel and gooseneck trailers. This 7-way female outlet comes with all necessary hardware to establish a solid connection, as well as a dust cover to keep the connector socket clean when not in use. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this factory tow package socket is not equipped on every vehicle, a CURT custom wiring connector (also called a T-connector) utilizes the socket for simple, stress-free installation. Instead of cutting, splicing, and soldering into your vehicles wiring system, the custom wiring connector uses a single OEM compatible plug and instantly provides a standard vehicle-to-trailer hitch wiring connection. To ensure long-lasting reliability, all CURT custom connector wiring is thoroughly tested for optimal functionality.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Telluride |
- 3156/3157;Amber;Super Bright;360degree diffused lens
- W/ LED HEADLAMPS
- Want a bright LED bulb offering improved style and visibility at a great price? Eco Series produces 600 lumens light output. The compact size makes it fit into every application
- Product Attributes:
- Light Output: 600 Lumen
- IP Rating: Ip67
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Amp Draw per Bulb: 0.65 Amps @ 12v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- LED Source: up to 23 x 3020 LEDs
- Up to 600LM total output per bulb (high mode)
- Color: White/Amber/Red
- Current draw: 0.65A @ 12V (high mode)
- Voltage: 9V - 18V DC
- Diffused 360 degree lens creates smooth all-around illumination
- Compact size similar to stock bulb to ensure there are no fitment or clearance issues
- Polarity reversible contact points
- ECO Series LED bulbs offer improved style and visibility at a great price. The size is similar to the OEM bulb so converting to LED bulbs is as easy as changing the stock bulb. The smooth 360degree diffused lens illumination brightens the darkest spaces and make your vehicle stand out.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2021 - Kia Sorento | Rear | SX |
- Custom Wiring Harness; 4-Way Flat Output; Select Kia Niro
- 3-Wire System; 4-Way Flat; 10-Amp Max
- CURT 56376 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Kia Niro
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected Powered
- WARNING CA Proposition 65: Yes
- Install Time: 45 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped w/Powered Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Kia Niro (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Niro |
- 4-Way Flat Output; 3 W Electrical System; 7.5 Amps Tail Light Circuits; 3.0 Amps Turn And Brake Circuits
- CURT 56469 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Kia K5
- Custom Wiring Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped w/Powered Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Custom Wiring Harness
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia K5 |
- Custom Wiring Harness; 4-Way Flat Output; Select Kia Forte
- 4-Way Flat Output
- CURT 56457 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Kia Forte
- Custom Wiring Harness
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Plugs Into Vehicle Tail Light Assembly To Provide A 4 Way Flat
- Simple Plug And Play Design Eliminates The Need For Cutting
- 4 Way Flat Output Connects Tail Lights Brake Lights
- Equipped w/Tail Light Converter For Vehicle Trailer Compatibility
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One Year Warranty
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Kia Forte (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe it's the boat landing at your favorite fishing spot, maybe it's a campsite that overlooks one of nature's masterpieces, or maybe it's the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle |
|---|
| 2021 - Kia Forte |
Showing 1 - 10 of 256 products
Loading...