Image
Product
Price
- Race Sport Headlight Conversion Kit - 1007436
- V2 DRIVE Series H11 2,500 LUX Driverless Plug-&-Play LED Headlight Kit with Canbus Decoder 3yr warranty
- Race Sport - Headlight Conversion Kit
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP Selling Package Quantity UOM: Ea
- AAP Selling Package Quantity: 1
- IP Rating: Ip67
- Prop 65 - Long Label: Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Estimated Install Time: 0.5 Hours
- Operating Voltage: 12vdc
- LUX: 5,960 Raw Lux
- AAP_UDA_4: 65
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.tif
- Kelvin (Color Temperature): 6,000k
- Chip Type: Phillips
- Prop 65 (C, R or CR): Cr
- Life Expectancy: 50,000 Hours
- The NEW V2 DRIVE Series is the latest LED headlight and fog light kit in the industry for ATV's, Motorcycles, Race bikes, Off-Road vehicles, and Automotive. All the solutions for LED's have been built into this technology. The LED kit does not contain a driver, but does come with an optional Canbus Decoder pack to plug n play between the LED bulbs and the vehicle to steady voltage, and interface with CANBUS functional vehicles. The size of the bulb bases are specifically designed to eliminate fitment issues from oversized aftermarket bulbs. The light output and performance is amazing at 2,500 LUX, and great for night time safety driving. General Specs: Rated LUX output - 2,500 LUX per bulb or 5,000 LUX per kit. RAW LUX light output is 2,980lx per bulb or 5,960lx per kit. RAW Lumen Measured on Meter is 2,480lm per bulb or 4,960lm per kit. Warranty - 3yr Warranty. Canbus - Canbus Decoders included in kits. Plug N Play OEM sized (no fitment issues). Temperature: -45 plus or minus 85 C. Voltage: DC9V-32V. Beam Angle: 330 degree. 6,000 Kelvin Color range
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- Race Sport Headlight Conversion Kit - 1006573
- Terminator Series H11 Fan-less LED Conversion Headlight Kit with Pin Point Projection Optical Aims and Shallow Mount Design
- Race Sport - Headlight Conversion Kit
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- AAP Selling Package Quantity UOM: Ea
- Wattage: 50-watts
- AAP Selling Package Quantity: 1
- IP Rating: Ip67
- Prop 65 - Long Label: Prop 65 Warning: This Product Can Expose You To Chemicals, Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Estimated Install Time: 0.5 Hours
- Operating Voltage: 12vdc
- LUX: 5,614 Raw Lux
- AAP_UDA_4: 65
- Prop 65 Warning Label: Warning - Both Cancer And Reproduction.tif
- Kelvin (Color Temperature): 6,000k
- Current Draw: 3.6 Amps
- Chip Type: Phillips
- Prop 65 (C, R or CR): Cr
- Life Expectancy: 50,000 Hours
- The TERMINATOR LED Kit is world famous for its superior performance when compared to other LED lights on the marketplace. We use an incredible high performing reflector to focus the light and keep the light forward where it needs to be. This kit boasts just over 2,000LUX per bulb per 4,000LUX per kit in our lab, making it the perfect high output bulb for any vehicle type. Its shallow mount fan-less design keep the bulb from overheating and delivering consistent performance day after day. See 2-3 times further than stock lighting systems, increasing stopping distance by 200 percent. LED technology provides instant on per off light with no ramp-up time. Fanless heat-sink technology. Low mounting depth base design. LED lasts longer than your OEM lighting systems. Focus cup design for narrow projection beam - no glare. Plug-n-play design for installation (additional interface harnesses may be required for some vehicles). 2 Year Warranty. Rated 2,000 LUX per bulb or 4,000LUX per kit (Raw Lux Measurement @ 1ft is 2,807lx per bulb or 5,614lx per kit). Rated 2,250 Lm per bulb or 4,500 Lm per kit (Raw Lumen Measurement on Lumen meter is 2,374lm per bulb or 4,748lm per kit). Trademark TERMINATOR - 15332-0023 Serial Number 90631817
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru WRX |
- Custom 4-Flat; Select Subaru Vehicles; OEM Tow Package Required
- Circuit Protected And Powered; 3-Wire System; 4-Way Flat; Tail Light Circuit 6.0 Amps; Turn And Brake Circuit 3.0 Amps
- CURT 56040 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Subaru Ascent; Forester; Outback; Crosstrek; XV
- Custom Wiring Connector
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected Powered
- Install Time: 10 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Plugs Into Existing Vehicle Socket To Provide 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates The Need For Splicing
- 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals
- Equipped w/A Powered 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- CURT custom wiring connectors are the easiest way to outfit your vehicle with a CURT trailer wiring connection. They are built with some of the most advanced technology in the industry, and each one is custom-fitted to work with a specific make and model. Some automotive manufacturers install a special socket on the vehicle to be used for vehicle-to-trailer wiring. Although this special socket is not equipped on every vehicle, a CURT custom wiring connector -- also called a T-connector -- utilizes the socket for simple, stress-free installation. Rather than requiring you to cut, splice and solder into your vehicles wiring system, the custom wiring connector uses a single OEM-compatible plug and instantly provides a standard, universal vehicle-to-trailer wiring connection, typically in the form a 4-way flat. All CURT custom wiring connectors are made vehicle-specific for the easiest possible installation and the best fit. This particular plug-in connector provides a 4-way flat socket and is designed to be a custom wiring option for certain years of the Subaru Ascent, Forester, Outback, Crosstrek and XV Crosstrek (factory tow package required; to verify your vehicle compatibility, see application info). It comes with all necessary hardware to establish a solid connection. It also comes with a dust cover to keep the connector socket clean when not in use. To ensure long-lasting reliability, all CURT custom wiring connectors are thoroughly tested for optimal functionality. Stress is the last thing you should feel when towing a trailer -- whether youre hauling your RV to that favorite camping destination, your ATVs up to the hunting grounds or your fishing boat to the new hidden hotspot. At CURT, we think your towing equipment should add to the enjoyment of your experience, not detract from it.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Subaru Crosstrek | Convenience |
- Custom Wiring Harness; 4-Way Flat Output; Select Subaru Legacy
- 4-Way; Flat Output
- CURT 56444 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Subaru Legacy
- Custom Wiring Harness
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped w/Powered Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Subaru Legacy (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Subaru Legacy | Base |
- 9005/90006/9012/H10;Fix Canbus and PWM Error
- W/ HALOGEN CAPSULE HEADLAMPS
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | High Beam |
- H11/H8/H9/H16JP;Fix Canbus and PWM Error
- W/ HALOGEN CAPSULE HEADLAMPS
- All in one harness to fix CANBus and PWM errors for any LED headlight and fog light conversion
- Product Attributes:
- IP Rating: Ip67
- Power: 6.5w
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
- Current: 0.5a At 13v
-
Features:
- Error cancelling wiring harness for vehicles equipped with CANBus and PWM system.
- Eliminates flickering, on and off flash, and dashboard warning lights and other vehicle electrical system complications.
- For use with LED headlight bulbs. Developed for upgrading LED headlight bulbs into the headlight and fog light of vehicles that operate with CANBUS / PWM technology. Simply plug and play installation to prevent bulb out warnings or flickering.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | Low Beam |
- 921;White;Super Bright;360degree diffused lens
- W/ HALOGEN CAPSULE HEADLAMPS
- Want a bright LED bulb offering improved style and visibility at a great price? Eco Series produces 600 lumens light output. The compact size makes it fit into every application
- Product Attributes:
- Light Output: 600 Lumen
- IP Rating: Ip67
- Amp Draw per Bulb: 0.65 Amps @ 12v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- LED Source: up to 23 x 3020 LEDs
- Up to 600LM total output per bulb (high mode)
- Color: White/Amber/Red
- Current draw: 0.65A @ 12V (high mode)
- Voltage: 9V - 18V DC
- Diffused 360 degree lens creates smooth all-around illumination
- Compact size similar to stock bulb to ensure there are no fitment or clearance issues
- Polarity reversible contact points
- ECO Series LED bulbs offer improved style and visibility at a great price. The size is similar to the OEM bulb so converting to LED bulbs is as easy as changing the stock bulb. The smooth 360degree diffused lens illumination brightens the darkest spaces and make your vehicle stand out.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Ascent |
- 921;White;Super Bright;360degree diffused lens
- W/ LED HEADLAMPS
- Want a bright LED bulb offering improved style and visibility at a great price? Eco Series produces 600 lumens light output. The compact size makes it fit into every application
- Product Attributes:
- Light Output: 600 Lumen
- IP Rating: Ip67
- Amp Draw per Bulb: 0.65 Amps @ 12v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- LED Source: up to 23 x 3020 LEDs
- Up to 600LM total output per bulb (high mode)
- Color: White/Amber/Red
- Current draw: 0.65A @ 12V (high mode)
- Voltage: 9V - 18V DC
- Diffused 360 degree lens creates smooth all-around illumination
- Compact size similar to stock bulb to ensure there are no fitment or clearance issues
- Polarity reversible contact points
- ECO Series LED bulbs offer improved style and visibility at a great price. The size is similar to the OEM bulb so converting to LED bulbs is as easy as changing the stock bulb. The smooth 360degree diffused lens illumination brightens the darkest spaces and make your vehicle stand out.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Ascent |
- 9005;Extreme Brightness;Turbo Fan Cooling
- W/ HALOGEN CAPSULE HEADLAMPS
- EXTREME BRIGHTNESSIf you?re looking for the brightest monster of all it is our Xtreme series LED headlight bulb. The Xtreme Series can produce 5x the light output of stock halogen bulbs and is brighter than a 35W HID system.
- Product Attributes:
- Power Consumption: 45 Watt
- Light Output: 10,000 Lumen Per Kit
- IP Rating: Ip65
- Amp Draw per Bulb: 3.0 Amps @ 13v Dc
- Color Temperature: 6,500 Kelvin
- Operating Voltage: 9-16 Dc Voltage
- Prop 65 (C, R or CR): Cr
-
Features:
- Powerful 10,000 lumens output produces stunning illumination that beats the 35W HID system
- Precision optics designed for long range visibility with zero glare
- Patented VacPipe cooling integrated heat sink allows for plug & play installation as easy as replacing a stock bulb
- SmartDrive technology with built-in Advanced Temperature Regulation provides dependable operation at full intensity
- Temperature Regulation provides dependable operation at full intensity
- Bulb collar rotates 360degree for optimal beam pattern
- Durable and shock resistant build for all weather driving
- Automotive grade LED chips paired with advanced cooling technology make the Xtreme Series the brightest LED headlight bulbs on the market. Produces a stunning output that's brighter than a 35W HID system and 5x brighter than a stock halogen bulb. Bulky fan cooling LED bulbs have become history. The Xtreme Series is designed to be compact enough to fit in the tightest spaces.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Ascent | High Beam |
- Custom Wiring Harness; 4-Way Flat Output; Select Subaru Impreza
- Circuit Protected And Powered; 3-Wire System; 4 Way Flat; Tail Light Circuit 6.0 Amps; Turn And Brake Circuits 3.0 Amps
- CURT 56367 Vehicle-Side Custom 4-Pin Trailer Wiring Harness; Fits Select Subaru Impreza
- Custom Wiring Harness
- Product Attributes:
- Output Type: 4-way Flat
- Electrical System Type: 3w
- Converter Type: Circuit Protected Powered
- Install Time: 45 Minutes
- Turn and Brake Circuits: 3.0 Amp
- Tail Light Circuits: 6.0 Amp
-
Features:
- Plugs Into Vehicle Tail Light To Provide A 4-Way Flat Socket
- Simple Plug-And-Play Design Eliminates Cutting Or Splicing
- 4-Way Flat Output Connects Tail Lights Brake Lights Turn Signals
- Equipped With A Powered 3-Wire To 2-Wire Tail Light Converter
- Constructed w/Smt Circuitry For Better Performance And Durability
- Dust Cover Included To Keep Connector Clean When Not In Use
- Backed By A Limited One-Year Warranty
- Made In USA
- If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness -- also called a T-connector -- is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Subaru Impreza (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination -- maybe its the boat landing at your favorite fishing spot, maybe its a campsite that overlooks one of natures masterpieces, or maybe its the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Subaru Impreza | Convenience |
Showing 1 - 10 of 43 products
Loading...