Image
Product
Price
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Kia Forte Koup | L | 2359 | 4 Cyl 2.4L | - |
- Oil Filter
- H-3.406 in.; OD-3.15 in.; M20 x 1.5-6H Thread; psi Relief Valve 11-17 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M20 X 1.500 In. -6h
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.3 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.156 In. (80mm)
- Removal Nut: Yes
- Item Height: 3.406 In. (87mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
102703301, 104079A1, 1146934, 116182, 116509, 11713229, 11900535100, 11900535151, 119530030, 11966035150, 1200664, 121433, 1216382301, 12195035152, 12195035153, 1220827, 1220833, 12445035100...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2011 - Kia Sorento | L | 2359 | 4 Cyl 2.4L | LX | - |
- Premium OEM Replacement Balancer
- Product Attributes:
- Counterweight Balance: Neutral, No Counterweight
- Nose Outside Diameter:
- 1.650
- 41.90
- Pulley 1 Outside Diameter:
- 144.000
- 5.670
- Crank Bore:
- 1.103
- 28.01
- Bolt Hole Quantity: 0
- Woodruff Key Included: No
- Installation Instructions Included: No
- Ring Width:
- 1.062
- 26.97
- Outer Ring Material: Cast Iron
- Pulley 1 Number Of Grooves: 6
- Timing Marks: Yes
- Pulley 1 Type: Serpentine
- Crank Trigger/Exciter Plate: No
- Overall Outside Diameter:
- 148.00
- 5.827
This Part Fits the Following OEM/Substitute Numbers:
594-341, 594-408
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Kia Sportage | L | 1998 | 4 Cyl 2.0L | 122 |
- PRO-TEC Cartridge Lube Metal Canister Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.556
- Duty Type: Ld
- Style: Cartridge Lube Metal Canister
- Media Material: Cellulose
- Outer Diameter Bottom: 2.697
- Class: A
- Inner Diameter Bottom: 1.008
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
100164, 2100164, 5001291813, 618-10164, 732, 8-10164, 84050, CF6127, CF653, CH10855, DL10855, FP10855, G0164, L26127, LF653, M6127, M989, MGL10164...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Sedona | V | 3470 | United States | 6 Cyl 3.5L | - |
- PRO-TEC Cartridge Lube Metal Free Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Outer Diameter Top: 2.559
- Duty Type: Ld
- Micron: 18.00
- BetaRatio: 2/20/75=18/28/31
- Style: Cartridge Lube Metal Free Filt
- Media Material: Cellulose
- Outer Diameter Bottom: 2.559
- Class: C
- Inner Diameter Bottom: 0.984
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
27029, 57029, 618-57029, 67029, 7029, 729, 8-57029, 84029, CH10515, COC10515, DL10515, G7029, LF654, M1C-255A, M1C255, M5848, M982, MGL10515...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2011 - Kia Borrego | V | 4627 | Canada | 8 Cyl 4.6L | - |
- Theta FF Engine
- Premium OEM Replacement Balancer
- Product Attributes:
- Counterweight Balance: Neutral, No Counterweight
- Nose Outside Diameter:
- 1.650
- 41.90
- Pulley 1 Outside Diameter:
- 144.000
- 5.670
- Crank Bore:
- 1.103
- 28.01
- Bolt Hole Quantity: 0
- Woodruff Key Included: No
- Installation Instructions Included: No
- Ring Width:
- 1.062
- 26.97
- Outer Ring Material: Cast Iron
- Pulley 1 Number Of Grooves: 6
- Timing Marks: Yes
- Pulley 1 Type: Serpentine
- Crank Trigger/Exciter Plate: No
- Overall Outside Diameter:
- 148.00
- 5.827
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Kia Rondo | L | 2359 | 4 Cyl 2.4L | - |
- Stock Replacement Exhaust Valve
- Stock Replacement Exhaust Valve
- Stock
- Product Attributes:
- Lock Groove Quantity: 1
- Valve Head Diameter:
- 1.137
- 28.88
- 29.0
- Grade Type: Regular
- Seat Angle: 45.0
- Length:
- 105.89
- 106.0
- 4.169
- Coated Finish: Yes
- Stem Diameter:
- 0.215
- 5.0
- 5.46
- Title: Engine Exhaust Valve
- Oversized: No
- Locks Included: No
- Precision engineering, selection of superior grade alloy materials and advanced manufacturing processes ensure that Melling exhaust valves meet the exacting specifications required for efficient, durable and powerful performance. Melling exhaust valves feature high fatigue strength materials, excellent heat resistance and years of dependable performance. Melling exhaust valve selections are available in a wide variety of designs and materials for most OEM and performance vehicle applications.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1011A178, 13256, 22212-25000, 22212-25002, E-5283, EV168, EVHY11, V3256
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Optima | L | 2359 | DOHC | 4 Cyl 2.4L | D | - |
- Stock Replacement Exhaust Valve
- Stock Replacement Exhaust Valve
- Stock
- Product Attributes:
- Lock Groove Quantity: 1
- Valve Head Diameter:
- 1.137
- 29.0
- Grade Type: Regular
- Seat Angle: 45.0
- Length:
- 106.0
- 4.169
- Coated Finish: Yes
- Stem Diameter:
- 0.215
- 5.0
- Title: Engine Exhaust Valve
- Oversized: No
- Locks Included: No
- Precision engineering, selection of superior grade alloy materials and advanced manufacturing processes ensure that Melling exhaust valves meet the exacting specifications required for efficient, durable and powerful performance. Melling exhaust valves feature high fatigue strength materials, excellent heat resistance and years of dependable performance. Melling exhaust valve selections are available in a wide variety of designs and materials for most OEM and performance vehicle applications.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 2011 - Kia Optima | L | 2359 | DOHC | 4 Cyl 2.4L | 7 | - |
- Engine Oil Filler Cap
- Product Attributes:
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Vented: No
- Neck Diameter: 1.32 In
- Shell Diameter: 2.63 In
- Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.
This Part Fits the Following OEM/Substitute Numbers:
14151, 2651026611, 2651026630, 703-1922, 8151, 9MO151, MO151, NI, P8151
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2011 - Kia Sedona | V | 3470 | 6 Cyl 3.5L | - |
- High Flow Premium Media; H-4 in.; OD-2.5 in.; w/o psi Relief Valve
- K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
- Oil Filter
- Product Attributes:
- Thread Size: N/a
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Cartridge
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Filter Material: High Flow Premium Media
- Inside Diameter: 0.813 In. (21mm)
- Gasket Material: Viton Rubber
- Package Material: Corrugated
- PSI Relief Valve: No
- Outside Diameter: 2.500 In. (64mm)
- Removal Nut: No
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
This Part Fits the Following OEM/Substitute Numbers:
0410825, 0410846, 0410847, 1457429116, 263003C250, 263203C250, 263203C300, 263203C30A, 263203C700, 263203F100, 57029, 57042, 57250, 7029, 7042, 7250, 84029, 84042...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2011 - Kia Borrego |
Showing 1 - 10 of 413 products
Loading...