Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Acura TL |
- Engine Valve Cover Gasket Set
- Includes Spark Plug Tube Seals Valve Cover Grommets Included PermaDry Molded Rubber Gasket(s) Included
- FEL-PRO VS 50614 R Engine Valve Cover Gasket Set for Honda CR-V
- Product Attributes:
- Grade Type: Premium
- Configuration: One Piece
- Gasket Sealant Included: No
- Mounting Hole Quantity: 0
-
Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation
- SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
151202501, 190014, AVC149S, VS10415, VS50382A, VS50382S, VS50564
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Acura TSX | L | 2354 | 4 Cyl 2.4L | 144 |
- Engine Mount
- Suspension Mount Left; OEM Replacement
- Product Attributes:
- Per Vehicle Quantity: 1
- Mount Material: Steel
- Mounting Position: Front
- Grade Type: Regular
- Mounting Hardware Included: No
- Bushing Color: Black
- Stud Quantity: 0
- Mounting Hole Quantity: 1
- Meets or Exceeds Original Equipment Manu: Yes
- Heat Shield Included: No
- Housing Color: Gray
- Bracket Color: Black
This Part Fits the Following OEM/Substitute Numbers:
50285SDAA01, 604590, 9899, A65025
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Acura TSX | L | 2354 | Front Center | 4 Cyl 2.4L | 144 |
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- M20x1.5
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- Spin-On Adapter Ports Up Filter Mount Kit
- Product Attributes:
- Adapter thread size: 3/4"-16, 13/16"-16, 18x1.5mm, 20x1.5mm, 22x1.5mm
- Remote filter thread size: 3/4-16
- Adapter inlet size: 1/2 Npt
- Remote filter inlet size: 1/2 Npt
- Remote filter landing: 2-1/2, 2-3/4, 3-1/2
- Adapter thickness: 1-3/4, 2
-
Features:
- Universal Engine Oil Filter Relocation Kit with 1/2" NPT Ports
- This Universal single filter kit allows oil filter to be relocated to a convenient, easy-access location. Includes a high quality, die cast aluminum 1/2" NPT ports up filter mount and a 1/2" NPT ports spin-on adapter with most everything you need for an easy installation. Filter mount uses Fram PH8A Oil Filter or equivalent. Designed to fit most passenger vehicles on the road today with 2 1/2" to 3 1/2" oil filter landings. Spin-on adapters provide external oil lines to allow the addition of an engine oil cooler and/or remote filter mount, installing at the stock engine oil filter location. This all-new version has a billet style look and has an ultra-bright, polished appearance.
Additional Fitment Information:
| Vehicle |
|---|
| 2013 - Acura TL |
- Engine Crankshaft Seal Kit
- 1 Piece Rubber
- FEL-PRO BS 40685 Engine Crankshaft Seal Kit for Honda Pilot
- Product Attributes:
- :
- One-piece
- Rubber
- :
-
Features:
- Application specific design to ensure a perfect fit
- Meets or exceeds all original equipment specifications
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
181011701, 67766, RS30230
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Acura MDX | V | 3664 | Rear | 6 Cyl 3.7L | - |
- Spool Valve Gasket & Filter
- Engine Variable Timing Spool Valve Filter
- Product Attributes:
- Filter Material: Rubber, Stainless Steel
- Gasket Thickness: .12
-
Features:
- Provides a cost-savings alternative to replacing the complete spool valve
- Direct replacement ensures exact fit, easy installation and leak-free seal
- Micron screen filters are constructed with polished stainless steel to prevent corrosion
- Designed to filter out harmful particles as small as 0.0059 in. (0.149 mm) to prevent spool valve failure
- Gates OE performance Variable Valve Timing Spool Valve Filters and Gaskets provide a cost-savings alternative to replacing the complete spool valve and, if serviced, can extend the life of the spool valve. These gaskets are constructed from high quality materials for durability and maximum service life. They effectively restore engine performance for better fuel economy, enhanced power and reduced emissions.
This Part Fits the Following OEM/Substitute Numbers:
15815R40A01, VVS907
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Acura TSX | L | 2354 | GAS | 4 Cyl 2.4L | 144 |
- Engine Valve Cover Gasket Set
- PermaDry Molded Rubber Gasket(s) Included
- FEL-PRO VS 50741 R Engine Valve Cover Gasket Set for Honda Civic
- Product Attributes:
- Grade Type: Premium
- Configuration: One Piece
- Gasket Sealant Included: No
- Mounting Hole Quantity: 0
-
Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM -- Proprietary cork-rubber formulation
- SUPERIOR SEAL -- Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
151082601, VS50563
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Acura ILX | L | 1997 | 4 Cyl 2.0L | 122 |
- Valve Cover Kit
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Grommets Included:
- No
- Non
- Oil Filler Cap Included:
- No
- Non
- Hold Down Tabs Included:
- No
- Non
- Finish: Natural
- Contains Oil Baffles:
- No
- Non
- Color:
- Gris Metálico
- Metallic Gray
- Cylinder Head Type: Dohc
- Material Thickness: 0.125
- Contenidos del paquete: 1 Cubierta De La Válvula Del Motor
- Inside Clearance Height: 3.6
- Material:
- Aluminio
- Aluminum
- Valve Cover Type:
- Corto
- Short
- Mounting Hardware Included:
-
Features:
- Direct replacement - this valve cover matches the original equipment part for fit and function
- Durable construction - this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
- Cost-effective solution - offers original equipment performance at competitive price
- Quality tested - this part has undergone try-on and material testing to ensure a quality fit and reliable service
- This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.
This Part Fits the Following OEM/Substitute Numbers:
102619299269013171, 102619299269013174, 12310R70A00, 12310R70A10, HA1418205, SK264491
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2013 - Acura RDX | V | 3471 | Front | 6 Cyl 3.5L | - |
- PermaTorque Engine Cylinder Head Gasket
- Head Bolts Not Included Head Bolt Replacement Recommended PermaTorqueMLS Head Gasket(s) Included
- FEL-PRO 26435 PT PermaTorque Engine Cylinder Head Gasket for Honda CR-V
- Product Attributes:
- : 92
- Cylinder Bore Diameter: 92
- Grade Type: Premium
- Gasket Sealant Included: No
-
Features:
- PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
- SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
- MULTI-LAYERED STEEL CONSTRUCTION -- Multiple layers of stainless steel maintain sealing stress and accommodate head lift
- UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
- DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
12251-R40-A01, 12251R40A01, 54772, 611016700
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Acura TSX | L | 2354 | 4 Cyl 2.4L | 144 |
- Twist Drain Solution
- Twist Style Package Quantity: 1 Dorman - AutoGrade - Carded Packaging Type: Card Thread Pitch: 1.5 mm
- Product Attributes:
- Método de drenaje: Drenaje Ez
- Threads Per Inch: 0
- SAE or Metric:
- Metric
- Métrico
- Magnetic:
- No
- Non
- Thread Pitch: 1.5
- Thread Type:
- Fine
- Fino
- Oversized Thread:
- No
- Non
- Bolt Grade: 2
- Describir el tipo: Tapón De Drenaje De Aceite
- Special Tool Required:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Gasket Type:
- Gasket
- Junta
- Color:
- Black
- Negro
- Plateado
- Silver
- Socket Points: M6 -1.0
- Head Tool Size: 21 Mm
- Thread Diameter: 0.54
- Contenidos del paquete: 1 Tapón De Drenaje, 1 Junta
- Describe Type: Oil Drain Plug
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero Al Carbono
- Carbon Steel
- Drain Method: Ez Drain
-
Features:
- Simplifies service - this trademark Dorman Twist Drain plug replaces the original equipment oil drain plug and allows for cleaner and easier oil changes
- Tool-free solution - eliminates need for wrench to drain oil pan
- simply push, twist and drain
- Leak resistant - proprietary inner seal handles high pressure and temperature to prevent leaks
- Corrosion resistant - specially coated to avoid rust for a long service life
- Ditch the wrenches and rags and get this Dorman Twist Drain oil drain plug. It's specially designed to simplify changing your oil by replacing your factory plug with a tool-free, clean and easy solution. Just push, twist and drain. It also features a custom tapered O-ring that ensures a leak-proof seal, and is finished with electrophoresis and anodization for rust resistance.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2013 - Acura TL | V | 3664 | 6 Cyl 3.7L | - |
Showing 1 - 10 of 387 products
Loading...