2023 Ford Engine Parts
Choose a Model for your 2023 Ford
Image
Product
Price
- Oil Filter
- H-4.0 in.; OD-3.656 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.5 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04884899AB, 04884899AC, 05038041AA, 51372, 872025, 89017527, B329, F1AZ6714A, F1AZ6731BD, FL820, FL820S, L24651, M1210, M1210A, OD5419, PF1250, PH2, PH8A...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Ford E-350 Super Duty |
- W/Bracket; Aluminum; 3 oz.
- CORSA Performance 3 oz. aluminum oil catch can with mounting bracket
- Engine Oil Catch Can
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- All Aluminum 6061 Construction Guards Against Corrosion Ensuring Performance For A Lifetime
- Generous 3 Oz. Capacity Lengthens Service Interval Levels
- Machined Powder Coated 11 Gauge Aluminum Brackets Provide A Easily Accessible Secure Mounting Location
- OEM Style Quick Disconnect Fittings And Premium Hose Lines Provide A Secure Connection That Will Not Leak
- Multi Stage System Separates Oil Through A Series Of Chambers Baffles And Bronze Filter Drawing Oil
- Captures Damaging Vapors And Particulates Capturing Blow-by And Reducing Long Term Wear
- Multi-Ply Reinforced Automotive-Grade Hoses Provide A Secure Fitment And Last Connection
- Threaded Can Housing Allows For Ease Of Serviceability
- Flattened Machined Catch Can Top And Knurled Bottom Allow Ease Of Maintenance
- Although Currently Not CARB Approved Corsa Performance Catch Cans May Help Reduce Emissions
- Installs In 30 Minutes Or Less On Most Applications
- 1 Year Warranty
- CORSA Performance's oil catch cans are the latest in a line of performance parts designed to maximize vehicle performance and longevity. Made from 6061 aluminum and featuring a multi-stage oil separation system, CORSA Performance oil catch cans work to eliminate blow-by of gas, water, oil vapors and particulates from the airpath. By reducing the impacts of blow-by, oil catch cans prevent damage to sensitive intake components and helps reduce carbon build-up on valves that over time reduce engine performance. Each vehicle specific oil catch can has been designed with OEM style quick disconnect fittings, premium automotive-grade hoses and upgraded components to ensure your vehicle runs at peak performance. Through careful design CORSA engineers have mounted each oil catch can in an easily accessible yet safe location allowing for ease of serviceability.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Ford Bronco | V | - | 6 Cyl 2.7L | Outer Banks | 164 |
- Oil Filter
- H-4.78 in.; OD-3.01 in.; M22 Special Thread x 1.5; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: M22 Special Thread X 1.500 In.
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.900 Lbs. (0.4 Kg)
- Product Box Height: 5.750 In. (146mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.130 In. (79 Mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-17
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 4.781 In. (121mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
19330000, 19330001, 5184231AA, 57045, 57502, 7045, 7502, 84045, 84502, AA5Z6714A, AA5Z6714AA, AA5Z6714AB, B7444, B7449, FL500, FL500S, L22500, LF637...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | Tremor | 302 |
- Direct-Fit Catch Can, PCV Side, Fits Ford F150 2.7L/3.5L EcoBoost/5.0L 2011+
- Direct-Fit Catch Can, PCV Side, Fits Ford F150 2.7L/3.5L EcoBoost/5.0L 2011+
- Product Attributes:
- SellingPoint04: Helps Reduce Carbon Buildup On Intake Valves
- SellingPoint05: Protects Intake System And Essential Engine Components By Capturing Oil Blow-by In The Pcv System
- SellingPoint06: Application-specific Pre-molded Hoses Fit With Stock Engine Cover
- SellingPoint07: Includes Factory-style Quick-disconnect Fittings For Easy And Secure Installation
- SellingPoint01: Direct Fit For 2011+ Ford F-150 2.7l/3.5l Ecoboost And 5.0l
- SellingPoint02: Anodized Billet 6061 Aluminum Construction
- SellingPoint03: Robust 3mm-thick Steel Bracket Ensures A Sturdy Mounting Point In A Serviceable Location
- TechSpec Chassis Codes: N/a
- SellingPoint08: Helps Maintain Proper Octane Levels To Reduce Potential Detonation
- SellingPoint09: Internal Air Diverter Increases Air Turbulence To Improve Oil Separation
- TechSpec Drain Plug Thread Size: N/a
- TechSpec Outlet: N/a
- TechSpec Catch Can Diameter (in): N/a
- SellingPoint10: Simple And Quick Installation With Basic Hand Tools
- TechSpec Note: N/a
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- Install Difficulty: 2
- SellingPoint11: Filter And Can Are Fully Serviceable
- SellingPoint12: Mishimoto Lifetime Warranty
- TechSpec Engine Codes: N/a
- SellingPoint13: N/a
- TechSpec Height (in): N/a
- SellingPoint14: N/a
- TechSpec Material: N/a
- TechSpec Applications: N/a
- TechSpec Includes: N/a
- TechSpec Inlet: N/a
-
Features:
- Direct fit for 2011+ Ford F-150 2.7L/3.5L EcoBoost & 5.0L
- Anodized billet 6061 aluminum construction
- Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
- Helps reduce carbon buildup on intake valves
- Protects intake system and essential engine components by capturing oil blow-by in the PCV system
- Application-specific pre-molded hoses fit with stock engine cover
- Includes factory-style quick-disconnect fittings for easy and secure installation
- Helps maintain proper octane levels to reduce potential detonation
- Internal air diverter increases air turbulence to improve oil separation
- Simple and quick installation with basic hand tools
- Filter and can are fully serviceable
- Mishimoto Lifetime Warranty
- Carbon buildup is an enemy of any motor, and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV, or “Positive Crankcase Ventilation", system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment, it’s not as great for your engine. In doing so, these vapors carry remnants of oil and unburned fuel, which make their way into your intake system, causing multiple problems. The first and largest problem is that the oil particles being carried in these vapors coat your intake system, including the intake manifold and intake valves. Over time, this will gum up and turn into carbon buildup. Direct-injection engines, like the EcoBoost, are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided, causing pre-detonation and knocking. This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system, the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location, allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze, and even fit with the factory engine cover. As with all our products, this catch can is backed by our signature Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Ford F-150 | V | 4951 | 8 Cyl 5.0L | 302 |
- Oil-Air Separator Kit
- Left/Right Canister; Includes All Hoses/Brackets/Hardware
- Oil-Air Separator Kit; Left/Right Canister; Includes All Hoses/Brackets/Hardware;
- Air-Oil Separator Kit
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Separate Left And Right Canisters
- All Required Hoses
- Brackets And Hardware Included
- Precision Molded Canisters with Unique Filter Media Separates Oil Vapor From The Air In The PCV System
- Designed And Engineered Specifically For Installation On The Ford EcoBoost Family Engines
- All OEM Quality Hoses And Fittings Are Used For A High Quality Installation And Function
- Canisters Are Easy To Drain By Removing PCV Lines Off Canister
- Removing Canister And Draining Oil
- Engineered And Manufactured In The USA
- Air-Oil Separator Kit
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Ford Bronco | Wildtrak |
- Oil Filter
- H-3.75 in.; OD-3 in.; 3/4 in. - 16 Thread; psi Relief Valve 11-14
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 0.800 Lbs. (0.4 Kg)
- Product Box Height: 4.000 In. (102mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.190 In. (81mm)
- Package Material: Paperboard
- Product Box Length: 3.190 In. (81mm)
- PSI Relief Valve: 11-14
- Outside Diameter: 3.000 In. (76mm)
- Removal Nut: Yes
- Item Height: 3.750 In. (95mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
04E115561, 04E115561H, 104044, 11421258039, 1164626, 11715272, 1174416, 1183358, 119139, 1205002, 1220406, 1220645, 130144, 132023, 140517050, 1520813210, 1520813212, 1520855400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Ford Bronco | L | 2300 | 4 Cyl 2.3L | Badlands | 140 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position | Engine VIN |
|---|---|---|
| 2023 - Ford F-150 | Front | 4 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Eng:998
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 2023 - Ford F-150 | V | 3496 | Front | GAS | 6 Cyl 3.5L | Lariat | 213 |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Eng:99D
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2023 - Ford F-150 | Front | FULL HYBRID EV-GAS (FHEV) |
- High Flow Premium Media; H-5.5 in.; OD-1.938 in.; w/o psi Relief Valve
- K/N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available.
- Oil Filter
- Product Attributes:
- Thread Size: N/a
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Style: Cartridge
- Item Weight: 0.200 Lbs. (0.1 Kg)
- Filter Material: High Flow Premium Media
- Inside Diameter: 0.844 In. (21mm)
- Gasket Material: Viton Rubber
- Package Material: Paperboard
- PSI Relief Valve: No
- Outside Diameter: 1.938 In. (49mm)
- Removal Nut: No
- Item Height: 5.500 In. (140mm)
- Package Type: Box
- Anti-Drain Back Valve: No
-
Features:
- High Performance Design for Outstanding Filtration
- High-Efficiency Media with Uniform Pleats
- Allows for High Oil Flow Rates
- Ideal for High-End Synthetic Motor Oil
- K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.
This Part Fits the Following OEM/Substitute Numbers:
CH10197, E73HD134, F026407002, FT4Z6731A, HU831X, L382, OX1961D, P2062, WL7439
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Ford Bronco | V | 2956 | 6 Cyl 3.0L | Raptor | 181 |
Showing 1 - 10 of 142 products
Loading...