Image
Product
Price
- Standard Grade Universal Catalytic Converter - 2.00in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Standard Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Standard Grade Federal / Epa Compliant Universal Catalytic Converter 53004
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Subaru Standard | H | 1595 | Rear | 4 Cyl 1.6L | - |
- After Front Catalyst O/Diam. I/Diam. Height 2&3/8 1&13/16 1/2
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1983 - Subaru Brat | Naturally Aspirated |
- After Front Catalyst O/Diam. I/Diam. Height 2&3/8 1&13/16 1/2
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1983 - Subaru Brat | Naturally Aspirated |
- After Front Catalyst O/Diam. I/Diam. Height 2&3/8 1&13/16 1/2
Additional Fitment Information:
| Vehicle | Aspiration |
|---|---|
| 1983 - Subaru Brat | Naturally Aspirated |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- Cylinder Head to Y-pipe
- Located between cylinder head and Y-pipe (on non-turbo models) or exhaust collector pipe (on turbo models).
Additional Fitment Information:
| Vehicle |
|---|
| 1983 - Subaru GL |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- At cylinder head and Y-pipe (on non-turbo models) or exhaust collector pipe (on turbo models).
- Located between cylinder head and Y-pipe (on non-turbo models) or exhaust collector pipe (on turbo models).
Additional Fitment Information:
| Vehicle |
|---|
| 1983 - Subaru GL |
- Standard Grade Universal Catalytic Converter - 2.00in.
- Magnaflow Standard Grade Universal Catalytic Converter - 2.00in.
- Universal Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53004 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Subaru Standard | H | 1595 | Rear | 4 Cyl 1.6L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23868 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1980-1984 Subaru GL, 1980-1987 Subaru Brat, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Subaru Standard | H | 1595 | Front | 4 Cyl 1.6L | - |
- Standard Grade Direct-Fit Catalytic Converter
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Direct-Fit Standard Grade Federal (Not legal for sale or use in CA, CO and NY)
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Clamps Included: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
-
Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23868 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1980-1984 Subaru GL, 1980-1987 Subaru Brat, and additional vehicles. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Aspiration | CID |
|---|---|---|---|---|---|
| 1983 - Subaru Brat | H | 1781 | 4 Cyl 1.8L | Naturally Aspirated | - |
- Standard Grade Direct-Fit Catalytic Converter
- Not legal for sale or installation in California, Colorado or New York.
- Magnaflow Standard Grade Direct-Fit Catalytic Converter
- Product Attributes:
- Air Tube Count: 0
- Inlet Gasket Included: Yes
- Tube Material: Stainless Steel
- Oxygen Sensor Location: Pre And Post Converter
- Outlet Gasket Included: Yes
- Series: Standard Grade
- Grade Type: Regular
- Hangers Included: Yes
- Heat Shield Attached: Yes
- Outlet Mounting Hardware Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Substrate Material: Ceramic
- Finish: Stainless Steel
- Clamps Included: No
- Prop 65 Y/N: No
- Sensor Port Count: 2
- Air Tube Adaptable: No
- Title: Magnaflow Standard Grade Federal / Epa Compliant Direct-fit Catalytic Converter 23868
- California Air Resources Board (CARB) Certified: No
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
- MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23868 helps keep the check engine light off. DIY installation is easy with the proper tools (no cutting or welding required). With features including mandrel-bent tubing to eliminate flow restrictions and stainless steel construction to resist corrosion, you can have confidence in the quality of this catalytic converter. Using state-of-the-art 3D scanning systems in the design process, the MagnaFlow metrology department ensures this new part to fit and function like the original equipment. This direct-fit catalytic converter is designed to fit the 1980-1984 Subaru GL, 1980-1987 Subaru Brat, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Aspiration | CID |
|---|---|---|---|---|---|---|
| 1983 - Subaru GL | H | 1781 | Front | 4 Cyl 1.8L | Naturally Aspirated | - |
Showing 1 - 10 of 13 products
Loading...