Image
Product
Price
- 3-8-16x1.70; For Use w/87-99 4.0L/84-00 2.5L
- Hex Bolt Stud; 3-8-16x1.70; For Use w/87-99 4.0L/84-00 2.5L;
- Hex Bolt Stud
- Product Attributes:
- WARNING CA Proposition 65: No
- Engine Make/Size:
- Jeep 2.5l
- Jeep 4.0l
-
Features:
- Hex Bolt Stud
- Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Dakota | L | 2507 | 4 Cyl 2.5L | 153 |
- Hardware-Clamp HD. 2 1/2in. U-Bolt
- Size 2.5 in.; Heavy Duty; Steel 2 1/2 in. System
- Hardware-Clamp
- Walker U-Bolt Clamp
- Product Attributes:
- Most Popular Make/Model: Ford F-150
- Nut Type: Hex
- Saddle Gauge: 11
- WARNING CA Proposition 65: No
- Saddle Hole Type: Round
- Size: 2.500 In.
- Hardware Material: Steel
- Class: A
- Product Grade: Economy
- Min Year Covered: 1963
- Max Year Covered: 2016
- Most Popular Year: 2004
- U Bolt Diameter: 0.375 In.
- Total Part VIO: 23844610
- Diameter (in.): 2.500 In.
- Clamp Type: U-bolt
-
Features:
- Many Different Clamp Designs Available To Meet Your Needs
- Available In Stainless And Aluminized Steel
- Available In Individual Or Bulk Cartons
- Proudly Manufactured In The USA
- Walker(R), with our worldwide OE partnerships and manufacturing facilities, possesses the technical excellence needed to meet today's emissions control needs, while developing solutions for tomorrow's challenges. Walker(R) is a 'one-stop' convenience, offering complete engine-to-tailpipe coverage of replacement emissions control systems and components for popular domestic and import vehicles in broadmarket, performance, and commercial vehicle applications. Walker(R) delivers optimal OE-style fit, appearance, and dependability in aftermarket emissions control parts.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Dodge Ram 3500 |
- DynoMax Ultra-Flo Welded Muffler
- Oval; 3.0 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Center/Center; Reversible; Stainless Steel
- DynoMax Ultra Flo Welded Muffler
- Ultra Flo™ Welded Universal Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 19.000 In.
- Muffler Type: Absorption
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Center
- WARNING CA Proposition 65: No
- Fitment: Universal
- Outlet Configuration: Center
- Muffler Body Length: 14.000 In.
- Outlet Quantity: 1
- Max Year Covered: 2007
- Most Popular Year: 2001
- Muffler Body Height: 4.500 In.
- Muffler Body Finish: Bare
- Total Part VIO: 7562201
- Body Length: 14.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Chevrolet Silverado 1500
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 19.000 In.
- Product Grade: Premium
- Min Year Covered: 1997
- Inlet Diameter Designation: Inside Diameter
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Stainless Steel
- Muffler Body Shape: Oval
- Inlet Position: Center
- Muffler Reversible: Yes
- Outlet Type: Pipe Connection
-
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Dakota | V | 5211 | 8 Cyl 5.2L | RWD | 318 |
- DynoMax Ultra-Flo Welded Muffler
- Oval; 2.5 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Offset/Center Reversible; Stainless Steel
- DynoMax Ultra Flo Welded Muffler
- Ultra Flo™ Welded Universal Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 19.000 In.
- Muffler Type: Absorption
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Center
- WARNING CA Proposition 65: No
- Fitment: Universal
- Outlet Configuration: Center
- Muffler Body Length: 14.000 In.
- Outlet Quantity: 1
- Max Year Covered: 2019
- Most Popular Year: 2017
- Muffler Body Height: 4.500 In.
- Muffler Body Finish: Bare
- Total Part VIO: 2005212
- Body Length: 14.000 In.
- Inlet Outside Diameter: 2.500 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Toyota Tacoma
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 19.000 In.
- Inlet Inside Diameter: 2.500 In.
- Muffler Inlet Diameter: 2.500 In.
- Product Grade: Premium
- Min Year Covered: 2000
- Inlet Diameter Designation: Inside Diameter
- Main Piping Diameter: 2.500 In.
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Stainless Steel
- Muffler Body Shape: Oval
- Inlet Position: Offset
- Muffler Reversible: Yes
- Outlet Type: Pipe Connection
-
Features:
- Constructed Using All 409 Stainless Steel
- 100% Welded Construction For Lifelong durability
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 2000 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) Welded mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Dakota | V | 5211 | 8 Cyl 5.2L | 4WD | 318 |
- DynoMax Ultra-Flo SS Muffler
- Universal; Oval; 3 in. Inlet/2.5 in. Outlet; 4.25 in. H x 9.75 in. W x 14 in. Muffler L/19 in. Overall L; Center/Offset; Reversible; Stainless Steel Dual Exhaust~Exits In Rear On Either Side Of License Plate~Under 8800 Gross Vehicle Weight
- DynoMax Ultra Flo SS Muffler
- Ultra Flo Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 19.000 In.
- Muffler Type: Absorption
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Outlet Configuration: Offset
- Muffler Body Length: 14.000 In.
- Outlet Quantity: 2
- Max Year Covered: 2008
- Most Popular Year: 2004
- Muffler Body Height: 4.250 In.
- Muffler Body Finish: Bare
- Total Part VIO: 6680502
- Body Length: 14.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Chevrolet Silverado 1500
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 19.000 In.
- Outlet Outside Diameter: 2.500 In.
- Product Grade: Premium
- Min Year Covered: 1994
- Inlet Diameter Designation: Inside Diameter
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Stainless Steel
- Muffler Body Shape: Oval
- Inlet Position: Center
- Muffler Reversible: Yes
- Outlet Type: Pipe Connection
-
Features:
- Constructed Using 304 Stainless Steel For Lifelong Durability
- Completely Polished For Show-Quality Shine
- Unrestricted Straight-Through Design
- Dyno Proven To Flow Up To 2000 SCFM And Support Up To 1900 HP
- Exclusive Continuous Roving Fiberglass Technology
- CRF Technology Absorbs Unwanted Interior Resonance
- Maintains A Deep Performance Tone
- Straight-Through Design Ensures Unrestricted Exhaust Flow
- Reduces Back pressure
- Limited Lifetime Warranty
- DynoMax(R) Ultra Flo(TM) SS Polished performance mufflers are constructed of stainless steel for lifelong durability and completely polished for show-quality shine. The unrestricted, straight-through design is dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Ultra Flo(TM) SS Polished mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | 3906 | 6 Cyl 3.9L | WS | 239 |
- DynoMax Super Turbo Muffler
- Universal; Oval; 4.25 in. x 9.75 in.; 3 in. And 2.5 in. ID; 13 in. Shell Length; 17 in Overall Length; No Flow Directors Dual Exhaust~Exits In Rear On Either Side Of License Plate~Under 8800 Gross Vehicle Weight
- DynoMax Super Turbo Muffler
- Super Turbo Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 17.000 In.
- Muffler Type: Combination
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Flow Director: No
- Outlet Configuration: Offset
- Body Height: 4.250 In.
- Muffler Body Length: 13.000 In.
- Outlet Quantity: 2
- Max Year Covered: 2008
- Most Popular Year: 2004
- Muffler Body Height: 4.250 In.
- Muffler Body Finish: Aluminized
- Muffler Count: 1
- Inlet Type: Single Offset
- Total Part VIO: 6680502
- Body Length: 13.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Chevrolet Silverado 1500
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 17.000 In.
- Outlet Outside Diameter: 2.500 In.
- Product Grade: Economy
- Min Year Covered: 1994
- Inlet Diameter Designation: Inside Diameter
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Steel
- Muffler Body Shape: Oval
- Inlet Position: Offset
- Muffler Reversible: No
- Outlet Type: Dual Outlet
-
Features:
- Exclusive Patented Flow Director Design Channels Exhaust Flow
- Eliminates Turbulence
- Large Internal Flow Tubes Improve Exhaust Flow
- Large Internal Flow Tubes Reduce Backpressure
- Fiberglass Matting Tech To Absorb Unwanted Interior Resonance
- Maintains A Mellow Performance Tone
- Dyno Proven To Flow Up To 700 SCFM/Support Up To 636 HP
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | 3906 | 6 Cyl 3.9L | LT | 239 |
- DynoMax Intermediate Pipe
- 2.5 in. Dual System Under 8600 Gross Vehicle Weight~Dual Exhaust~Exits In Rear On Either Side Of License Plate~Under 8800 Gross Vehicle Weight~LH/RH Side
- DynoMax Intermediate Pipe
- Tail Pipe Extension Pipe
- Product Attributes:
- Most Popular Make/Model: Chevrolet Silverado 1500
- Outlet Connection Type: Pipe
- Outlet Diameter Designation: Outside Diameter
- Inlet Diameter: 2.500 In.
- WARNING CA Proposition 65: No
- Fitment: Direct Fit
- Overall Length: 26.375 In.
- Class: Pb
- Product Grade: Premium
- Bend Type: Mandrel
- Min Year Covered: 1994
- Inlet Diameter Designation: Inside Diameter
- Outlet Quantity: 1
- Max Year Covered: 2007
- Most Popular Year: 2004
- Inlet Quantity: 1
- Mandrel Bent: Yes
- Total Part VIO: 6104872
- Inlet Connection Type: Pipe
- Outlet Diameter: 2.500 In.
-
Features:
- Manufactured w/Precision Benders
- Fixture Checked
- Insuring Every Part Fits Perfectly
- Providing Quick Easy Installation
- Mandrel Bends Improve Flow Capacity Over Traditional Bends
- Combines State Of The Are Engineering w/Quality Material
- Provides Exceptional Strength And Durability
- Pipe Diameter Are Increased From OEM Sizes To Improve Flow
- Expandable Bushings For Custom Applications
- Proudly Manufactured In The USA
- Dynomax(R) Performance Exhaust, a leading performance exhaust brand built on over 20 years of market leadership. Each and every Dynomax(R) product is backed by engineers who know what you want and expect out of a performance exhaust product.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | - | 8 Cyl 5.9L | ST | 360 |
- DynoMax Super Turbo Muffler
- Universal; Oval; 4.25 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25.5 in. Overall Length Dual Exhaust~Under 8500 Gross Vehicle Weight~LH/RH Side
- DynoMax Super Turbo Muffler
- Super Turbo Muffler
- Product Attributes:
- Tip Quantity: 0
- Muffler Overall Length: 25.500 In.
- Muffler Type: Combination
- Outlet Diameter Designation: Inside Diameter
- Outlet Position: Offset
- WARNING CA Proposition 65: No
- Fitment: Universal
- Body Width: 9.750 In.
- Flow Director: Yes
- Outlet Configuration: Offset
- Body Height: 4.250 In.
- Muffler Body Length: 20.000 In.
- Outlet Quantity: 1
- Max Year Covered: 2011
- Most Popular Year: 1998
- Muffler Body Height: 4.250 In.
- Muffler Body Finish: Aluminized
- Muffler Count: 1
- Inlet Type: Single Center
- Total Part VIO: 4493396
- Body Length: 20.000 In.
- Inlet Connection Type: Pipe
- Most Popular Make/Model: Ford Ranger
- Muffler Outlet Diameter: 2.500 In.
- Automotive Item Grade: High Performance Part
- Outlet Connection Type: Pipe
- Muffler Body Width: 9.750 In.
- Overall Length: 25.500 In.
- Inlet Inside Diameter: 2.500 In.
- Muffler Inlet Diameter: 2.500 In.
- Outlet Outside Diameter: 2.500 In.
- Product Grade: Economy
- Min Year Covered: 1986
- Inlet Diameter Designation: Inside Diameter
- Main Piping Diameter: 2.500 In.
- Shape: Oval
- Inlet Quantity: 1
- Muffler Body Material: Steel
- Muffler Body Shape: Oval
- Inlet Position: Center
- Muffler Reversible: Yes
- Outlet Type: Single Offset Outlet
-
Features:
- Exclusive Patented Flow Director Design Channels Exhaust Flow
- Eliminates Turbulence
- Large Internal Flow Tubes Improve Exhaust Flow
- Large Internal Flow Tubes Reduce Backpressure
- Fiberglass Matting Tech To Absorb Unwanted Interior Resonance
- Maintains A Mellow Performance Tone
- Dyno Proven To Flow Up To 700 SCFM/Support Up To 636 HP
- Proudly Manufactured In The USA
- Limited Lifetime Warranty
- DynoMax(R) Super Turbo(TM) performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone. The 'Pure Unadulterated POWER' of DynoMax(R) Super Turbo(TM) mufflers are backed by a Limited Lifetime Warranty and exclusive 90-Day Performance & Sound Guarantee(TM).
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | V | 7990 | 10 Cyl 8.0L | 488 |
- Exhaust Manifold Gasket Set
- FEL-PRO MS 95480 Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
18647, 53006620, 53006621, 53009378, 53009379, 53010188, 53010189, 53030869, 53030873, MS16209
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 1500 | V | - | 8 Cyl 5.9L | 360 |
- For Use w/12-V Exhaust Manifold PN[1045980/1045980SS/1045989]
- Exhaust Manifold Gasket Set; For Use w/12-V Exhaust Manifold PN[1045980/1045980SS/1045989];
- Exhaust Manifold Gasket Set
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
-
Features:
- Includes Gaskets For Cyl. Head To Manifold And Manifold To Turbo
- 36 Month/75000 Mile Warranty
- BD Diesel Performance is unique among its peers in that it designs, manufactures and distributes a wide range of products specifically engineered for performance diesel applications. Located in Abbotsford, British Columbia, Canada, BD's state-of-the-art facility covers 65,000 square feet, and employs 60 plus highly-trained individuals. The BD name became recognized in 1989, when the company introduced the first exhaust brake for the burgeoning diesel pick-up truck market. BD's roots, however, actually date back to 1972, when Valley Fuel Injection, Ltd. first opened its doors. Today, Valley Fuel Injection and BD Diesel Performance are one, with eight specialty divisions that focus on diesel power train components: Fuel Injection Calibration Department, Exhaust Brake Manufacturing, Electronic Circuit Design and Assembly, Transmission and Torque Converter Design and Remanufacturing, Turbocharger Design, Installation and Research and Development. BD's comprehensive approach to the diesel performance aftermarket ensures not only quality products, but educated dealers and satisfied customers. Thank you for your interest in BD Diesel Performance!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Dodge Ram 3500 | L | - | 6 Cyl 5.9L | 359 |
Showing 1 - 10 of 180 products
Loading...