Image
Product
Price
- Exhaust Manifold Gasket Set
- FEL-PRO MS 96474 Exhaust Manifold Gasket Set
- Fel-Pro® gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
This Part Fits the Following OEM/Substitute Numbers:
18115-PNB-003, 18115-PRB-A01, MS4805
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Civic | L | 1998 | 4 Cyl 2.0L | 122 |
- 2.75 in. Dia.; Includes Tubing/Silencer/Muffler/Hardware/4 in. Polished Tip; Bolt On/No Modification Req.; T-304 Stainless Steel;Part Does Not Affect Vehicle Emissions
- MegaPower Cat Back Exhaust System; 2.75 in. Dia.; Includes Tubing/Silencer/Muffler/Hardware/4 in. Polished Tip; Bolt On/No Modification Req.; T-304 Stainless Steel;
- MegaPower Cat Back Exhaust System
- Product Attributes:
- Main Piping Diameter: 2.750 In.
- Tail Pipe Diameter: 2.750 In.
- Tubing Diameter: 2.750 In.
- Exhaust Type: Cat-back
- Exit Position: Oem
- System Type: Cat Back
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
- Inlet Inside Diameter: 2.750 In.
- Pipe Material: 304 Stainless
- Muffler Body Length: 2.500 In.
-
Features:
- Bolt-On System
- No Welding Or Fabrication Necessary
- T-304 Stainless Steel
- A properly designed exhaust system is critical to engine performance. Skunk2's 70mm MegaPower Exhaust system for the 06-11 Civic Si coupe was developed with this in mind and is based off of more than 15 years' worth of racing experience. Dyno-proven for maximum horsepower, MegaPower R cat-back systems are constructed of T-304 stainless steel, are robotically TIG welded, and feature CNC mandrel bends for a precise fit. Designed for naturally aspirated engines featuring higher compression, aggressive camshafts, and racing headers as well as for mild turbocharged applications that require more exhaust flow than Skunk2's 60mm MegaPower Exhausts provide, MegaPower R Exhausts allow engines to breathe more efficiently and produce more power thanks to larger diameter piping. MegaPower R Exhaust systems were designed for maximum flow and power, featuring oversized tubing and mufflers, which results in a significantly louder tone when compared to 60mm MegaPower systems. Featuring Japanese-spec, Super N1 styling, MegaPower R Exhaust systems generate more horsepower by optimizing engine airflow and volume through carefully selected, application-specific tubing lengths and diameters and increased wave scavenging effects for more horsepower. CNC mandrel bending allows for a constant tubing diameter throughout the bend, which results in precise fitment as well as improved exhaust gas flow. Each system is fitted with a resonator, includes stainless steel flanges, and is finished off with a straight-through, low-restriction racing muffler for uninterrupted flow. Each fully polished muffler is mated to a 110mm polished tip with its own acid-etched MegaPower badge and serialized nameplate. A Skunk2 removable silencer and all necessary hardware are also included. Skunk2's MegaPower Exhaust lineup is based off of the same systems we custom build for our road racing and time attack vehicles. .
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Body | CID |
|---|---|---|---|---|---|---|
| 2007 - Honda Civic | L | 1998 | 4 Cyl 2.0L | Si | Coupe | 122 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-141 Engine Family Number 7HNXT02.4FKR ; Certification Level : LEV2 ULEV
- Direct-Fit Catalytic Converter
- Direct-Fit CALIFORNIA OBDII CONVERTERS
- Product Attributes:
- Inlet Diameter: 2.5
- Mounting Hardware Included: No
- Hangers Included: No
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 32.25
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Inlet Attachment: Bolt-on
- Main Piping Diameter: 2.5
- Body Shape: Round
- Outlet Attachment: Bolt-on
- Sensor Port Count: 2
- Substrate: Ceramic
- Air Tube Adaptable: No
- Body Length: 11
- Clamp Included: No
- Outlet Diameter: 2.5
This Part Fits the Following OEM/Substitute Numbers:
18160-RZA-A00, 18160RZAA00
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda CR-V | L | 2354 | 4 Cyl 2.4L | 144 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number 7HNXT03.5VKR ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Mounting Hardware Included: No
- Hangers Included: No
- Heat Shield Attached: Yes
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Substrate: Ceramic
- Air Tube Adaptable: No
- Clamp Included: No
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda Pilot | V | 3471 | Rear | 6 Cyl 3.5L | - |
- Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-141 Engine Family Number 7HNXT02.4FKR ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.5
- Heat Shield Attached: No
- Body Width: 4
- Overall Length: 11
- Body Type: Spun
- Body Height: 4
- Subtitle: California / Carb Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Air Tube Adaptable: No
- Body Length: 11
- Outlet Diameter: 2.5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda CR-V | L | 2354 | 4 Cyl 2.4L | 144 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-140 Engine Family Number 7HNXV02.4EKC ; Certification Level : LEV2 LEV
- Direct-Fit Catalytic Converter
- Direct-Fit CALIFORNIA OBDII CONVERTERS
- Product Attributes:
- Mounting Hardware Included: Yes
- Subtitle: California / Carb Compliant
This Part Fits the Following OEM/Substitute Numbers:
18160-PZD-A00, 18160-PZD-S00, 18160PZDA00, 18160PZDS00
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Element | L | 2354 | 4 Cyl 2.4L | 144 |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number 7HNXT03.5TKR ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Mounting Hardware Included: No
- Hangers Included: No
- Heat Shield Attached: Yes
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Substrate: Ceramic
- Air Tube Adaptable: No
- Clamp Included: No
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda Ridgeline | V | 3471 | Rear | 6 Cyl 3.5L | - |
- Direct-Fit Catalytic Converter
- CARB Executive Order D-193-148 Engine Family Number 7HNXT03.5WKR ; Certification Level : LEV2 ULEV OE Spec Cutting and Welding Required During Installation
- Direct-Fit Catalytic Converter
- 2.25in. Universal California OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Mounting Hardware Included: No
- Hangers Included: No
- Heat Shield Attached: Yes
- Body Width: 6.375
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 3.75
- Subtitle: California / Carb Compliant
- Inlet Attachment: Weld-on
- Outlet Orientation: Straight
- Body Shape: Oval
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Substrate: Ceramic
- Air Tube Adaptable: No
- Clamp Included: No
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2007 - Honda Pilot | V | 3471 | Rear | 6 Cyl 3.5L | - |
- Universal Catalytic Converter - 2.25in.
- Cutting and Welding Required During Installation
- Universal Catalytic Converter - 2.25in.
- Universal HM Grade Federal (Excludes CA)
- Product Attributes:
- Inlet Orientation: Straight
- Inlet Diameter: 2.25
- Heat Shield Attached: Yes
- Body Width: 4.375
- Overall Length: 13
- Body Type: Clam Shell
- Heat Shield Material: Aluminized Steel
- Body Height: 4.375
- Subtitle: Federal / Epa Compliant
- Substrate Material: Ceramic
- Inlet Attachment: Weld-on
- Heat Shield Included: Yes
- Outlet Orientation: Straight
- Body Shape: Round
- Outlet Attachment: Weld-on
- Sensor Port Count: 0
- Air Tube Adaptable: No
- Body Length: 9
- Outlet Diameter: 2.25
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Accord | V | 2997 | 6 Cyl 3.0L | - |
- Manifold Catalytic Converter
- CARB Executive Order D-193-137 Engine Family Number 7HNXV01.8MKR ; Certification Level : LEV2 ULEV
- Manifold Catalytic Converter
- Exhaust Manifold with Integrated Catalytic Converter CALIFORNIA CONVERTERS
- Product Attributes:
- Mounting Hardware Included: Yes
- Subtitle: California / Carb Compliant
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2007 - Honda Civic | L | 1799 | 4 Cyl 1.8L | - |
Showing 1 - 10 of 193 products
Loading...