Image
Product
Price
- California Universal Catalytic Converter - 2.25in.
- CARB Executive Order D-193-133 Engine Family Number (EFN) 8NTXV01.8BEA Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4
- Body Height: 4
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 7
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Series: California
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: D-193-133
- Body Type: Spun
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 551005
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 551005. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 2008 - Pontiac Vibe | L | 1794 | Front | 4 Cyl 1.8L | FWD | - |
- Exhaust Pipe Flange Gasket
- 2.150 (in) Inside Diameter
- FEL-PRO 61016 Exhaust Pipe Flange Gasket for Toyota Corolla
- Product Attributes:
- Inside Diameter:
- 2.135
- 54.2
- Grade Type: Premium
- Bolt Hole Quantity: 0
- Inside Diameter:
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
039-6494, 039-6497, 0396494, 0396497, 0K247-40-581, 0K24740581, 13314-1, 133141, 13342-1, 133421, 14183-58B02, 14183-65D00, 14183-65D10, 1418358B02, 1418365D00, 1418365D10, 17451-0D050, 17451-20010...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine Designation | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Pontiac Vibe | L | 1794 | Resonator Assembly To Muffler Assembly | 1ZZ-FE | 4 Cyl 1.8L | FWD | - |
- Exhaust Gasket-GM V8, 4.8L-5.7L LS1, LS6
- Product Attributes:
- Prop 65 - Short Label: Prop65_warning.jpg
- Prop 65 (C, R or CR): Cr
- Material: Graphite
- Remflex's unique flexible graphite material has been proven for more than 30 years in industrial applications, where temperatures routinely exceed 2,000 degrees-day after day, week after week, year after year. Now, they're bringing this technology to enthusiasts of all kinds to eliminate exhaust leaks for good! Whether you have an old pick-up that needs a manifold gasket, or a race car with custom-built headers, you can be assured that Remflex exhaust gaskets will work properly the first time, every time.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2008 - Pontiac G8 | Canada | GT |
- Exhaust Manifold Gasket Set
- Manifold Bolts Not Included
- FEL-PRO MS 92467 Exhaust Manifold Gasket Set for Chevrolet Silverado 1500
- Product Attributes:
- Grade Type: Premium
- Bolt Hole Quantity: 6
- Configuration: Multi Piece
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
111060401, 18813, 852354, AMS3711, MS16124
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac G8 | V | 5967 | 8 Cyl 6.0L | 364 |
- Exhaust Manifold Hardware Kit
- M8 x 1.25 Thread x 30.7 mm wo/Thread Locker Packaging Type: Card
- Product Attributes:
- Washer Included:
- No
- Non
- Stud Included:
- No
- Non
- Stud Material:
- Acero
- Steel
- Bolt Included:
- Oui
- Sí
- Yes
- Bolt Grade: 10.9
- Nut Included:
- No
- Non
- Tamaño de la rosca n.º 2: M8-1.25
- Tamaño de la rosca n.º 1: M8-1.25
- Thread Size #2: M8-1.25
- Thread Size #1: M8-1.25
- Contenidos del paquete: 12 Pernos De Múltiple De Escape
- Spring Included:
- No
- Non
- Washer Included:
-
Features:
- Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
This Part Fits the Following OEM/Substitute Numbers:
11518860, 11546600, 11609481, 6503131, 6506775AA, 6507423AA, 6507938AA, ES75120, SK03413
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac G8 | V | 5967 | 8 Cyl 6.0L | 364 |
- Exhaust Manifold Kit - Includes Required Gaskets And Hardware
- Product Attributes:
- Heat Shield Included:
- Oui
- Sí
- Yes
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Port Shape:
- Redondo
- Round
- Contenidos del paquete:
- 1 Junta De Múltiple Y 1 Brida
- 2 Pernos
- 2 Resortes Espirales
- Múltiple De Escape
- Material:
- Cast Iron
- Hierro Fundido
- Heat Shield Included:
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
This Part Fits the Following OEM/Substitute Numbers:
101541, 116337441992427421, 171040D040, 1710422100, 663434, 88969034
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac Vibe | L | 1794 | 4 Cyl 1.8L | - |
- HM Grade Universal Catalytic Converter - 2.25in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 2.25in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 4.375
- Body Height: 4.375
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.25
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.25
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 99205hm
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac Vibe | L | 1794 | 4 Cyl 1.8L | - |
- Quad Split Rear Exit
- Magnaflow Street Series Stainless Axle-Back System
- Street Series Stainless Axle-Back System
- Product Attributes:
- Exhaust Tip Wall: Double Wall
- Muffler Type: Straight-through
- Exhaust Tip Edge: Rolled Edge
- Exhaust Tip Quantity: 4
- Exhaust Tip Material: Stainless Steel
- Muffler Quantity: 2
- Muffler Body Length: 14
- Clamps Included: No
- Muffler Body Height: 5
- Exhaust Tip Intercooled: No
- Muffler Finish: Brushed
- Valve Included: No
- Exhaust Tip Cut: Angle Cut
- Exhaust Tip Connection: Welded-on
- Hangers Included: Yes
- Exit Style: Quad Split Rear
- Main Piping Diameter: 2.5
- Exhaust Tip Resonated: No
- Exhaust Tip Shape: Round
- Muffler Body Material: Stainless Steel
- Exhaust Tip Diameter: 3
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Exhaust Tip Finish: Polished
-
Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- The MagnaFlow 2008-2009 Pontiac G8 Street Series Axle-Back Performance Exhaust System 16883 brings enhanced engine sound and dyno-proven performance to your 6.0L, 6.2L 2008-2009 Pontiac G8 with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Pontiac G8 exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Pontiac G8's exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Split Rear exit with 3in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16883 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow's 1-year limited finish warranty and limited lifetime construction warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac G8 | V | 5967 | 8 Cyl 6.0L | 364 |
- Exhaust Manifold Kit - Includes Required Gaskets And Hardware
- wo/EGR Port
- Product Attributes:
- Collector Port Diameter: 2.25
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Tube Wall Thickness: 0.125
- Port Shape:
- Rectangle
- Rectángulo
- Mounting Hole Quantity: 13
- Finish:
- Sin Recubrimiento
- Uncoated
- Heat Shield Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Oxygen Sensor Port:
- Oui
- Sí
- Yes
- Contenidos del paquete: Múltiple De Escape, 1 Empaque De Múltiple, 1 Junta De Brida, 3 Espárragos, 3 Tuercas
- Material:
- Cast Iron
- Hierro Fundido
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
This Part Fits the Following OEM/Substitute Numbers:
12603792, 12606689, 12607724, 40589328585731590, 662913
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac G5 | L | 2384 | 4 Cyl 2.4L | 145 |
- Exhaust Manifold Kit - Includes Required Gaskets And Hardware
- w/Federal Emissions
- Product Attributes:
- Collector Port Diameter: 2.25
- Grade Type:
- Reemplazo Estándar
- Standard Replacement
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Tube Wall Thickness: 0.125
- Port Shape:
- Rectangle
- Rectángulo
- Mounting Hole Quantity: 13
- Finish:
- Sin Recubrimiento
- Uncoated
- Heat Shield Included:
- No
- Non
- Gasket Or Seal Included:
- Oui
- Sí
- Yes
- Color:
- Gris Metálico
- Metallic Gray
- Oxygen Sensor Port:
- Oui
- Sí
- Yes
- Contenidos del paquete: Múltiple De Escape, 1 Empaque De Múltiple, 1 Junta De Brida, 3 Espárragos, 3 Tuercas
- Material:
- Cast Iron
- Hierro Fundido
-
Features:
- Ideal replacement - this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles
- Reliable construction - durable materials resist warping, cracking and leaking for long-lasting performance
- Complete repair - includes all necessary gaskets and downpipe hardware
- Trustworthy design - built by industry leader in aftermarket manifolds
- This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2008 - Pontiac G5 | L | 2198 | 4 Cyl 2.2L | 134 |
Showing 1 - 10 of 158 products
Loading...